Welding rotator (turning roll, roller bed): -Composed of driving/power unit, idler unit, electric cabinet and manually controlled panel. -Manual controlled panel with buttons makes operation much convenient. -Distance between rollers can be adjusted automatically to fit pipes/tanks with different diameters. -Frequency speed control is applied for the adjustment of roller speed. -Two steel rollers are used at both ends of rubber rollers to protect rubber rollers. -Rollers material could also be polyurethane or steel. -Widened rollers increase life span of rollers and reducer pressure on pipes/tanks. Clear packing.
-The worktable could be rotated ( in 360¡ã)or tilted (in 90-120¡ã)allowing work piece to be welded at the best position. -Variable Frequency control (VFD) speed by rotating and motor-driven speed regulation by tilting from which customers can choose in line with operational requirements. -Electric control system composed of electric cabinet and manual control panel making it easy to operate. -Equipped with slewing bearing which helps increase the loading capacity and makes the rotation smooth. - Worktable is manufactured with six M30T bolt grooves used to clamp and position the work pieces. -Several concentric grooves are processed onto the surface of the worktable to help position the work piece at the center. -The whole rack will not deform even long time use because of annealing treatment. ZHB-50: Max Loading Capacity:5T Power source: 380V 3 phases 50Hz Rotating Speed: 0.05£0.5rpm Rotating Angle:360¡ã Tilting Speed: 0.2 Tilting Angle: 120¡ãrpm Diameter of Table:¦µ1500mm Output: rotate: 1.5kw Tilt: 3 kw Rotating Speed Adjust:VFD Max Gravity: 300mm Max Eccentricity:200mm. clear packing.
Features 1. The column and boom are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength. 2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device. 3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the fixed welding manipulator. 4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box. 5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts. Fixed welding manipulator (column boom manipulator) 6. The column rotation can be carried out with manual and electric control then locked. 7. The electrical equipment of the fixed welding manipulator includes a manual control box and electric cabinet. 8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional. Clear packing.
1. Save power: 450 - 500 units per 24 hours. 2. Easy to operate 3. Perfect configuration.
1. Type: a420 2. Diameter: 0.15-0.35mm 3. Line: 20,22 4. Spool: pt(4-15) 5. Enamel application: felt 6. Power combustion: 400-500 units/24 hours. .
1. Type: A450 2. Diameter: 0.25-0.60mm 3. Line: 20,22 lines 4. Spool: pt(10-25) 5. Enamel application: felt, die 6. Power combustion: 400-500 units/24 hours.
1. Type: A500 2. Diameter: 0.40-0.80mm 3. Line: 16,18,20 lines 4. Spool: pt(15-60) 5. Enamel application: felt, die 6. Power combustion: 450-550 units/24 hours.
1. Type: A400 2. Diameter: 0.10-0.25mm 3. Line: 20,22 4. Spool: PT(4-15) 5. Enamel application: felt 6. Power combustion: 400-500 units/24 hours.
Product details Place of origin china (mainland) Brand name yxa Model number YXAWST-100l Welding metal Detailed description Our welding seam tracker(seam welder) detects every changes of welding position automatically, then control welding torch to move left/right up/down through our controller, finally make welding torch to run along welding position correctly, thus ensuring welding accuracy and improving welding speed. During your welding process, , have you ever met the problems that welding seam is not straight enough, and welding torch does't run along welding seam automatically, So the solderer has to gaze at the welding torch always, and ajust the horizontal movement of welding torch frequently to follow welding seam correctly? This way, man-made factors will influence welding quality in certain degree. If so, our seam welder, as in important assistant welding machine, can solve your problems completely. 2. Specification Model Yxawst-100l Rated loading capacity 25kg Tacking range 100mm Maximum tracking speed 350mm/min Accuracy ¡à0.2mm Application welding Gtaw, tig, plasma Driving motor High-quality dc motor Driving method Motor drive¡úreducer¡úball screw¡úseam tracker Input power Ac100~240v single-phase, 50/60hz, 2a Standard configuration Controller + x/y sliding plate + sensor + sensor adjust + connecting cables Accessories option Remote control box Min. Order quantity 1 set/sets Fob price Port shanghai Payment terms t/t Production capacity Packaging details carton box or as requested Delivery time asap Product type public. Carton box or as requested.
Product Details Place of Origin Jiangsu, China (Mainland) Brand Name YXA Model Number YXAWO-100LP Voltage 100-240V Weight 6kg Usage welding oscillating welding torch Detailed Description 1. Fuction Welding Oscillator is a general assistant welding machine, to control welding torch swing right and left along the welding seam direction to widen the available welding joint,. It is adapted to MIG/MAG, TIG welding torch's swinging. Several groups of data can be seted. Each group of data includes procedure control of left/right swing rate, left/right range of oscillation, and left/middle/right staying time. The Oscillator is automatically controlled by the outer controller. 2. Technical Data Model YXAWO-100LP Parameter Feeding Mode Digital Input By Independent Adjusting Knob, Liquid Crystal Display Control Method Digital CPU Program Loading Capacity 5kg Slide Effective Stroke 60mm Maximum Oscillating Speed 3000mm/min Maximum Oscillating Frequency 120times/min Amplitude Range 2~25mm(Can Be Extended To 50mm) Amplitude Accuracy ¡À0.3mm Dwell Time Left/Right 0~2.0sec Application Welding Mig/Mag, Tig, CO2 Input Power AC100~240V Single-Phase,50/60HZ,2A Standard Configuration Controller + Sliding Plate + Connecting Cables Accessories Option Welding Gun Gripper; Crossing Sliding Adjustment, Welding Gun Angle Adjustment Min. Order Quantity 1 Set/Sets FOB Price Port Shanghai Payment Terms T/T Production Capacity Packaging Details Carton Box or as requested Delivery Time ASAP Product Type public . Carton Box or as requested.
Listing Description: (1) Seam Welder (2) Guides welding torch to run along welding seam correctly (3) Improve welding efficiency 40% Product Details: Place of Origin China (Mainland) Brand Name YXA Model Number YXAWST-100L Welding Metal Detailed Description: Our Welding seam tracker(seam welder) detects every changes of welding position automatically, then control welding torch to move left/right up/down through our controller, finally make welding torch to run along welding position correctly, thus ensuring welding accuracy and improving welding speed. During your welding process, , have you ever met the problems that welding seam is not straight enough, and welding torch does't run along welding seam automatically, so the solderer has to gaze at the welding torch always, and ajust the horizontal movement of welding torch frequently to follow welding seam correctly? This way, man-made factors will influence welding quality in certain degree. If so, our seam welder, as in important assistant welding machine, can solve your problems completely. 2. Specification Model YXAWST-100L Rated Loading Capacity 25kg Tacking Range 100mm Maximum Tracking Speed 350mm/min Accuracy ¡À0.2mm Application Welding GTAW, TIG, PLASMA Driving Motor High-Quality DC Motor Driving Method Motor Drive¡úReducer¡úBall Screw¡úSeam Tracker Input Power AC100~240V Single-Phase,50/60HZ,2A Standard Configuration Controller + X/Y Sliding Plate + Sensor + Sensor Adjust + Connecting Cables Accessories Option Remote Control Box Min. Order Quantity 1 Set/Sets FOB Price Port Shanghai Payment Terms T/T Production Capacity Packaging Details carton box or as requested Delivery Time asap Product Type public. Min. Order Quantity 1 Set/Sets.
Place of Origin Jiangsu, China (Mainland) Brand Name YXA Model Number YXAWST-200L Usage Laser Welding laser - The Laser Welding Seam Tracker(namely laser welder) consists of a precision laser sensor, controller and slide. The sensor does probe the weld seam and the controller does control the change value on the work-piece. The welding torch is guided rapidly and exactly by moving the slides. - Non-contact laser sensor makes detect position nearer to welding point, thereby dramatically reduce tracking delay and have a higher tracking accuracy. - High precision sensor is to explore welding seam position exactly. - Then let welding torch move left/right up/down to trace welding seam. - Increase welding speed and suface welding. - Acheive welding automation. It has independent operating system, our tracker can control sliders up/down left/right separately according to the changes of welding seam So you can regulate your welding machine(robot) and our laser welder separately, its working principle is as follows: 1. It has unique sensing system, sensor constantly monitoring the change of workpiece welding seam. 2. The signal for variation of welding seam is transfered to controller in time, 3. Controller adjusts its processing inside according to the received signal, 4. Then controller control slider(welding torch) to move up/right and left/right to follow the welding seam well, Thus acheiving automation of welding and beautifying welding surface. 2. Specification Model YXAWST-200L Rated Loading Capacity 100kg Tacking Range 200mm Maximum Tracking Speed 300mm/min Accuracy ¡À0.2mm Application Welding SUBMERGED TANDEM Driving Motor High-Quality DC Motor Driving Method Motor Drive¡úReducer¡úBall Screw¡úSeam Tracker Input Power AC100~240V Single-Phase,50/60HZ,2A Standard Configuration Controller + X/Y Sliding Plate + Sensor + Sensor Adjust + Connecting Cables Accessories Option Remote Control Box.
Place of Origin Jiangsu, China (Mainland) Brand Name YXA Type Pipe Welding Machine Application metal fabrication welding Welding drill pipe - Our welding oscillator (namely oscillation machinery) is assistant for pipelines. -Preset parameters for oscillating stroke, oscillating frequency, oscillating amplitude and oscillating accuracy before welding -Oscillator has restore memory function when power-up, parameters automatically restore to the preset one after power is on. -With dust-proof design, it effectively prevent welding spatter and dust into the oscillator,enhance product reliability, extend service life -Compact structure, reasonable design is also suitable for small places -Electronic controls oscillating speed, amplitude, to make operation simple and convenient. -While oscillator stops, return to the center automatically -Wide power voltage range, suitable for using around the world.
Place of Origin Jiangsu, China (Mainland) Brand Name YXA Model Number YXAWO-100LP Voltage 100-240V Weight 6kg Usage welding oscillating welding torch 1. Fuction Welding Oscillator is a general assistant welding machine, to control welding torch swing right and left along the welding seam direction to widen the available welding joint,. It is adapted to MIG/MAG, TIG welding torch's swinging. Several groups of data can be seted. Each group of data includes procedure control of left/right swing rate, left/right range of oscillation, and left/middle/right staying time. The Oscillator is automatically controlled by the outer controller. 2. Technical Data Model YXAWO-100LP Parameter Feeding Mode Digital Input By Independent Adjusting Knob, Liquid Crystal Display Control Method Digital CPU Program Loading Capacity 5kg Slide Effective Stroke 60mm Maximum Oscillating Speed 3000mm/min Maximum Oscillating Frequency 120times/min Amplitude Range 2~25mm(Can Be Extended To 50mm) Amplitude Accuracy ¡À0.3mm Dwell Time Left/Right 0~2.0sec Application Welding Mig/Mag, Tig, CO2 Input Power AC100~240V Single-Phase,50/60HZ,2A Standard Configuration Controller + Sliding Plate + Connecting Cables Accessories Option Welding Gun Gripper; Crossing Sliding Adjustment, Welding Gun Angle Adjustment Remark: We can also make welding oscillator in special specification for user demands.
Place of Origin Jiangsu, China (Mainland) Brand Name YXA Model Number YXAWO-100LP Voltage 100-240V Weight 6kg Usage welding oscillating welding torch 1. Fuction Welding Oscillator is a general assistant welding machine, to control welding torch swing right and left along the welding seam direction to widen the available welding joint,. It is adapted to MIG/MAG, TIG welding torch's swinging. Several groups of data can be seted. Each group of data includes procedure control of left/right swing rate, left/right range of oscillation, and left/middle/right staying time. The Oscillator is automatically controlled by the outer controller. 2. Technical Data Model YXAWO-100LP Parameter Feeding Mode Digital Input By Independent Adjusting Knob, Liquid Crystal Display Control Method Digital CPU Program Loading Capacity 5kg Slide Effective Stroke 60mm Maximum Oscillating Speed 3000mm/min Maximum Oscillating Frequency 120times/min Amplitude Range 2~25mm(Can Be Extended To 50mm) Amplitude Accuracy ¡À0.3mm Dwell Time Left/Right 0~2.0sec Application Welding Mig/Mag, Tig, CO2 Input Power AC100~240V Single-Phase,50/60HZ,2A Standard Configuration Controller + Sliding Plate + Connecting Cables Accessories Option Welding Gun Gripper; Crossing Sliding Adjustment, Welding Gun Angle Adjustment Remark: We can also make welding oscillator in special specification for user demands.
Welding positioner means the machines used to change the position of workpieces on the table and to ensure smooth rotation of the workpieces at certain required speed. Postitioner normally means (1)a table turning mechanism, and (2)table tilting mechanism. Main characters of BY welding positioner : 1.The rotation structure is driven by the DC motor, while stepless speed regulation can be achieved. 2. The turning structure of worm and gear has the function of self-lock, and the worktable can be turned steplessly between 0-90¡ã . 3. Special design of anti-electromagnetic, which reduces the high frequency interference of TIG's welding, and can improve the welding quality effectively. 4. A self-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder. 5. The adjustable-welding gun support can be furnished to fix the position of the welding torch. 6. The track and air-powered tip can be furnished to achieve the function of self-holding to the workpieces. Main characters of BY welding positioner : 1.The rotation structure is driven by the DC motor, while stepless speed regulation can be achieved. 2. The turning structure of worm and gear has the function of self-lock, and the worktable can be turned steplessly between 0-90¡ã . 3. Special design of anti-electromagnetic, which reduces the high frequency interference of TIG's welding, and can improve the welding quality effectively. 4. A self-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder. 5. The adjustable-welding gun support can be furnished to fix the position of the welding torch. 6. The track and air-powered tip can be furnished to achieve the function of self-holding to the workpieces. Export wooden box
1Model:BYT-200 2 Power Input:AC220V/AC110V 3Drive Motor:DC220V/AC110V 180W 4Table Horizontal Capacity : 200 Kg 5Table Vertical Capacity: 100 Kg 6Table Diameter:400 mm 7Table Centre Through-hole diameter: 45 mm 8Table Centre Through-hole height:600 mm 9Rotation Speed:0.5--7 rpm 10Tilt Range: 0--90. 11Tilt ModeManual: 12Over Dimension:600£¨L£©*530(W)*600(H) mm 13Net Weight: 150 Kg. Advantage of the through hole positioner 1, While it is welding, the through hole positioner is convenient for the pipe to be clamped and positioned, so it has improved the accuracy degree of welding. 2, While the pipe is welded, the through hole positioner will protect the gas when it go through the internal pipe, then it has improve the efficiency and quality of welding. Export welding positioner
This is the ideal small bench top welding positioner. The BY-10 welding positioner has quality and features normally found on only much larger welding positioners. 1.Solid State D.C. infinitely variable speed table rotation. 2.Heavy duty fully enclosed worm gear rotation drive. 3.On/off electric foot control. 4.110/220 volt AC 50/60 Hz input power. 5.High frequency protected for Tig welding. 6.Dynamic braking brings table rotation to a quick stop. 7.Durable baked on enamel paint finish. 8.Infinitely variable table tilting with degree scale. 9.Clockwise and counter clockwise table rotation. 10.Highest quality design and construction available.
Parameter specification Jo-30Jo-50 Pay-off type"initiative pay-up Pn200-300"initiative pay-up pn300-400 Screw diameter ¬)30¬)35 L/d of screw 25·+125·+1 "extrusion capacity (kg/h)"2030 Main machine power 7.5hp10hp Range of diameter¬)0.25-¬)0.9¬)0.35-¬)2.0 Cooling systemfold w / u shapefold w / u shape Hauling power 2hp2hp Accumulating rackhorizontal /inclinehorizontal /incline Accumulator length200m200m Line speedmax.500 m/minmax.500 m/min Taking up devicedual spoolsdual spools. Simple packing.
Parameter specification Jo-30+22jo-40+30jo-45+35 Line speed max.500m/minmax.500m/minmax.500m/min Pay-off type"initiative Pn200-300""initiative Pn300-400""initiative Pn300-500" Main motor¬)30f¯26d¬)40f¯26d¬)45*26d Auxiliary motor¬)22f¯18d¬)30f¯18d¬)35*18d "extrusion Capacity(kg/h)"405060 Hauling power2hp3hp3hp Accumulator "length 10m 2.5kg.M magnetic powder tension""length 10m 2.5kg.M magnetic powder tension""length 10m 2.5kg.M magnetic powder tension" Take-up devicedouble axis 2hpdouble axis 2hpdouble axis 2hp.
