Item No : .0048a Material : Rubber+iron Weight : 300g
LDD-S-MT Methylene Blue Clay Tester is used to determine the amount of live bentonite clay present in a sand sample. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
Double Speed Electric Winch Keywords: Double Speed Electric Winch, double speed winch, winch Introduction of Double Speed Electric Winch Double Speed Electric Winch with fast and slow and two multi-purpose winh, mainly for underground coal mining face, mechanized mining equipment and various types of mechanical and electrical equipment relocation and other auxiliary transport work, as well as underground mining face, shaft bottom, down the mountainmine surface, etc. the tramcar scheduling, material transport can also be used for the back of the stop pillar caving.  This series winch bevel gear drive form, the structure is simple, safe, reliable, and easy maintenance. Winch height and width dimensions suitable for smaller narrow underground space, winch operation is simple, with the throttle grip the hoist control button switch can be convenient to use. Parameter of Double Speed Electric Winch Reference number/typeJSDB-10JSDB-13JSDB-19  traction KNlow speedouter100130190  average  120165250 internal140200320 Fast 12 15 25  rope speed m/sSlow0.115-0.1570.103-0.1520.118-0.204  Fast0.756-1.030.833-1.230.86-1.5 reduction ratio Slow  175.62209.66247.44  Fast26.8925.8234.13 Wire rope diameter mm202430  rope capacity m120180400 motortypeYBK2-200L1-6YBK2-200L2-6YBK2-280S-6 power KW18.52245 speed r.pm970970980 Drum size mmdiameter380400540 width408531560  overall dimension mmlength263031583845 width7701215(970)1315 high85510301255 Total Weight kg200029606500
Introduction Grand-Mix (GM) consists of the latest generation scraper, brush and high capacity magnet, combined them into a simplified and rugged tool, which has an integral magnet section to capture ferrous debris, scrapers to dislodge difficult to-remove debris, and brushes to disturb the sheath and any other fluid build-up on the inner wall of the casing or liner. The tool can be run in the inner production riser, casing, and liner to remove a combination of scale, rust, mud film, drilling debris, ferrous debris, and pipe dope. Features One tool carries scrapers, brushes, or magnets on the same mandrel. Large flow area between magnets to capture large debris. Brush component can be readily redressed at remote locations. Available with any tubing connection to run directly on the completion tubing. Application the Grand-Mix can be configured for any Casing and Tubing combination with matching metallurgy and connections
The range of No. 0 spindles: 1-100 cp The range of No. 1, 2, 3, 4 spindles: 101-2000000 cp Model : RV-2M Model RV-2M Measurement Range 1-2 106 mpa.s Display LCD Spindles Specification No. 0, 1, 2, 3, 4 Note: The bigger the number of the Spindles, the bigger the measuring value Rotating Speed of Spindles 0.3 / 0.6 / 1.5 / 3 / 6 / 12 / 30 / 60 rpm/min. Interface Optional (RS232C, temperature probe, edit software CD) Automatic Switch free selection of proper rotating speed or spindles number. Stable Cursor Strip-type cursor fully charged displayed when reading basically stable Measurement Tolerance ± 2% Power AC 220V ± 10% 50 Hz ± 10% Working Condition Temperature 5-35 degree Relative humidity no more than 80% Outline Dimension (mm) 370 325-280 mm Packing (mm) 400 360 310 mm Net Weight (kg) 6.8 kg Gross Weight (kg) 9 kg Attachments l         No. 1,2,3,4 Spindles    No. 0 Spindle   Adapter Protection Frame Foundation Plate Up-Down Frame English Manual Hexagonal Spanner Solid Wrench
Shen Gong Carbide Knives is the largest carbide blade manufacturer in China, having over 20 years experience. We produce circular blades, round knives, slitter knives, slitting blades, solid carbide blades, tungsten carbide blades, used on slitting, converting and packaging machines, such as slitting knives for cardboard/coil/film/paper/fabric slitting lines, circular blades for cigarette machines, as well as round knives for packaging lines. Solid carbide blades for machine brands, such as HAUNI PROTOS, G.D, MOLINS PASSIM, Mark 8/9/95, BE, FOCKE, etc. Quality blades, best prices, customized sizes, and DHL/UPS/FEDEX door to door global delivery are all starting from inquiring me.
Introduction DHS-16A halogen moisture meter adopts HBM weighing system to ensure accurate weighing. Ring quartz tungsten halogen infrared heating source, quick drying of samples; in the drying process, the moisture content lost by the sample is continuously measured and displayed immediately. After the drying procedure is completed, the final moisture content value is locked. It can fully meet the requirements of moisture testing in areas like food, medicine, tobacco, paper making, chemical and mineral industry and so on.
We make the striking Wrench according to DIN 7444.
We make the striking Wrench according to DIN 7444.
XF-A6 is a kind of X-ray fluorescence spectrum precious metal tester, which is based on years of precious metal detection technology and experience, and is independent research and development production by CFAN Instrument company. It is equipped with imported top imported Si-pin detector, all elements detection, computer-integrated and aeronautical design, High-end appearance, which owns more than 10 research and development patents, outstanding performance, cost-effective! Our standard is in line with the new national standard GB18043-2013, can be accurate detection of gold and silver jewelry. Product advantage High cost performance Can fast accurate detection of various precious metal, widely applied! Nondestructive testing Will not cause any damage when measuring jewelry of any shape. Simple and intelligent operation Unique one-button test function, automatic detection, no professional operation required Fast for Testing 3 seconds qualitative, 7 seconds can get intuitive results. Easy to carry Integrated design, small space, easy to carry and management. Safe and durable Have anti-radiation function, the life of the machine is more than 10 years High precision PPM level accuracy, reliable testing data, plus or minus 0.01% of the detection precision Operational safety Equipped with radiation protection devices, and active protection operation safety. Technical parameters Equipment principles: X fluorescence energy dispersion Accuracy: ±0.05% Machine resolution:145±5eV Detector: Imported Si-pin probe temperature: - 11 ~ 46 â?? Built-in capacitive touch LED: OLED (9.7 inches)
A5-SDD is a kind of X-ray fluorescence spectrum precious metal tester, which is based on years of precious metal detection technology and experience, and is independently developed and produced by CFAN Instrument company. It is equipped with imported top SDD detector, all element detection, computer-integrated and aeronautical design, High-end appearance, which owns more than 10 research and development patents, outstanding performance, cost-effective! Our standard is in line with the new national standard GB18043-2013, can be accurate detection of gold and silver jewelry.
"best gauss meter overallSo, Tenmars TM-192 is the best gauss meter overall that we find on the market. It measures with its 3-axis internal orthogonal sensors to ensure accuracy. Also, itâ??s handheld and easy to carry. To evaluate a wide variety of ELF magnetic fields, regardless of the measuring angle, three internal orthogonal sensors are used for this device. The device is developed to get a more fast, accurate, and clear way for users to calculate the levels of magnetic field energy across power lines, consumer products, and industrial equipment. The device is a relatively cheap, portable device designed and optimized for measuring magnetic field intensity from 30Hz to 2000Hz at various bandwidths. MicroTesla (mT) or milli Gauss (mG) are the readings display units for this device. The functionality of data hold (HOLD), maximum hold (MAX), and minimal hold (MIN) is provided in this device. Both Auto Range and P Manual Range mode is provided. Room for data logging of memory size can accommodate 500 data sets. Aside from that, it functions for calendar and time. It also provides a low-level battery indication. The function of the overload display (OL) is given as well."
"The design of TD8620 hand-held digital Tesla meter follows the IEC-61010-1 safety standard, and conforms to the national verification regulation of JJG242-1995 Tesla meter. TD8620 hand-held digital Tesla meter adopts not only the high-sensitivity Hall sensor and high-resolution A / D conversion chip,but also the popular single-chip computer technology and digital filtering technology . It has the advantages of high sensitivity,stable reading, low power consumption , and light weight. The measurement range is 0-2000 Mt, and the basic accuracy is �±1%. It has the characteristics of automatic zero, automatic measurement range, keeping of maximum / minimum values, etc."
"The boiler tube oxide scale nondestructive tester is a dedicated power plant oxide scale detection instrument developed by our company, which adopts patented technology designed test probe, combined with the universal fluxmeter. On the one hand, it can quickly and effectively detect the status of the power plant boiler stainless steel tube internal oxide scale flaking accumulation, exclude stainless steel tube oxide scale too much leading to pipes brust; on the other hand, it can also provide effective data support for overall oxidation corrosion status of heating surface in the boiler stainless steel tube to help achieve the safety assessment of the boiler. This instrument is suitable for measuring non-magnetic stainless steel pipe inner layer accumulation rust. It can use a rechargeable battery, without power supply when test, which is suitable for outdoor environment operation. It can be used 4 hours once charge saturation. This product has been used by Hunan Xiangtan Power Generation Company Limited, Wuhan University, Nanyang Henan Yahekou Power Generation Co., Ltd., Anhui Huainan Pingwei power plants and Changsha thermal power plant, received good evaluations. Concrete structures and components : the improved DX-201 Fluxmeter and several the test probes matched with pipeline."
The TPJ-24-G solar radiation recorder is mainly used to monitor and record the total solar radiation inside and outside the greenhouse. It is an important instrument for the research of light energy utilization in the agricultural field. It is widely used in meteorology, agriculture, forestry, scientific research and teaching. The solar radiation recorder supports wireless data transmission, remote real-time viewing, simple operation, convenient management and analysis.
The UT521 is an earth-resistance tester. It is essential for various applications to have a good earth connection, for example, to discharge over-voltage or when lightning strikes. Earth testers work with pins that must be inserted into damp soil. In addition, a connecting wire for the measuring object is included, so you can compare it with the earth. The supplied pins are intended to measure the resistance of the earth to see if it is suitable for inserting an earth pin. The meter can perform both 2 and 3 wire-resistance measurements, and it is also possible to measure earth-voltage.
multi tool pliers Materials: 2CR13 Open: 16.6*6.6cm Close: 12*5cm Weight:215G Coating: Aluminum Anodized Packing: Clam Package
EXF9600 is a kind of X-ray fluorescence spectrum precious metal tester, which is based on years of precious metal detection technology and experience, and is independently developed and produced by Cfan Instrument company. It is equipped with imported Si - PIN detector, all element detection, computer-integrated and aeronautical design, High-end appearance, which owns more than 10 research and development patents, outstanding performance, cost-effective! Our standard is in line with the new national standard GB18043-2013, can be accurate detection of gold and silver jewelry. Technical parameters Equipment principles: X fluorescence energy dispersion Accuracy: 0.05% Machine resolution 145±5eV Detector: Si-Pin probe temperature: - 11 ~ 46 Built-in capacitive touch LED: OLED (9.7 inches) Size: 670�?400�?330mm Label printer: support Normal printer: support Thermal printer: support Balance/density meter: support Whether the battery support:NO Built-in industrial control computerï¼?YEs Voltage: 100 v to 240 v Rated power: 150 w weight:33kg
The movable bend of high pressure is an oil-field to fix the in common use tool of the well operation link pipe line, wash. Various models of AQE swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from V to 4* and rated WP ranging from 2000psi-20000psi (14MPa-140MPa). JEFA products are available in the models of style 20, style 30, style 40, style 50, style 60, style 70, style 80, style 10, and style 100. We use thread connection and union connection.
Snow sweeping brush is equipped on the snow-sweeping car, which is suitable for various snow sweeping machines of manufacturers from countries aboard. It is widely used in winter snow sweeping in highways, national highways, provincial highways, urban and rural roads, airports, docks, squares, and scenic roads. Snow sweeper Brush is manufactured by steel coil processing. With no binder and less vibration, it can further improve the cleaning power. Front-mounted snow sweepers are the most commonly used in snow sweepers.
