Double Speed Electric Winch

Reference number/type JSDB-10 JSDB-13 JSDB-19
traction KN low speed outer 100 130 190

average
120 165 250
internal 140 200 320
Fast 12 15 25

rope speed
m/s Slow 0.115-0.157 0.103-0.152 0.118-0.204

Fast 0.756-1.03 0.833-1.23 0.86-1.5
reduction ratio
Slow
175.62 209.66 247.44

Fast 26.89 25.82 34.13
Wire rope diameter mm 20 24 30

rope capacity
m 120 180 400
motor type YBK2-200L1-6 YBK2-200L2-6 YBK2-280S-6
power KW 18.5 22 45
speed r.pm 970 970 980
Drum size
mm diameter 380 400 540
width 408 531 560

overall dimension
mm length 2630 3158 3845
width 770 1215(970) 1315
high 855 1030 1255
Total Weight kg 2000 2960 6500

Jm model slow speed electric winch is most commonly used winch in construction site or workshop, etc. And power supply for the electric winch varies from 110v-440v/50&60hz according to different countries’ situation. The electric winch also can divided into: construction winch, marine winch, mine winch, building winch, cable winch, etc. With different models, speeds and structures, electric winch is used widely, such as road construction, bridge construction, factory, mines engineering, harbor, building, etc.
1.Loading capacity:0.5~200 ton or customized design;
2.Wire rope capacity:20~3600m or customzied design;
3.Working speed:5~20 m/min or customized design;
4.Power supply:220~690v, 50/60hz, three phase or customized design.

Model JK1 JK3 JK5 JK8 JK10
Line pull capacity (kg) 1000 3000 5000 8000 10000
Wire rope average speed (m/min) 30 30 28 20 19
Wire rope Dia. (mm): 9.3 15.5 21.5 26 30
Reduction box Type JZQ350 JZQ500 JZQ650 JZQ650 JZQ750
Transmission ratio 31.5 23.34 40.17 23.34 23.34
Drum (mm) Diameter 190 325 406 500 550
Length 360 520 840 900 1000
Capacity(m) 110 200 300 300 450
motor Type Y132M-4 YZR225M-8 YZR250M1-8 YZR250M1-6 YZR250M2-6
Power(kW) 7.5 22 30 37 45
Rotating speed(r/min) 1440 715 864 960 960
Hydraulic Brake YWZ-200/25 YWZ-200/25 YWZ-300/45 YWZ-300/45 YWZ-400
Dimension (cm) 945x97x60 147x140x95 186x166x95 240x180x110 250x190x120
Weight(kg) 460 1200 2700 4000 5000

Model Rated
pull Average speed Rope
length Motor
power Out size Dead
weight
KN m/min m KW mm KG
JM1 10 15 80 2.2 740*690*490 270
JM1.6 16 16 115 5.5 940*900*570 500
JM2 20 16 100 7.5 940*900*570 550
JM3.2 32 9.5 150 7.5 1430*1160*910 1100
JM5 50 9.5 190 11 1620*1260*948 1800
JM8 80 8 250 15 2180*1460*850 2900
JM10 100 8 200 22 2280*1500*950 3800
JM12.5 125 10 300 30 2880*2200*1550 5000
JM16 160 10 500 37 3750*2400*1850 8800
JM20 200 10 600 45 3950*2560*1950 9900
JM25 250 9 700 55 4350*2800*2030 13500
JM32 320 9 700 75 4500*2850*2100 20000
JM50 500 8 800 90 4930*3050*2250 38000
JM65 650 10 2400 160 5900*4680*3200 46000
JM65 650 10 2400 160 5900*4680*3200 46000

Taixing Expansion Marine Equipment Co., Ltd., (EME, stock Number: 691692), has extensive knowledge and expertise in designing and manufacturing deck machine like towing winch, mooring winch, anchor windlass, capstan etc for barge, container vessel, tug, MPV, oil tanker, scientific exploration ship, the Navy vessels, and associated deck equipment as bollards, warping rollers, chocks, fairleads, anchors and chains. For every single type and size of vessel, EME provides deck plans for efficient and effective anchoring and mooring operations.

Electric scraper winch
Item Unit 2JP-7.5 2JP-15 2JP-22 2JP-30 2JP-55
Pulling tension KN 8 14 20 28 50
wire rope average speed m/s 1 1.1 1.2 1.2 1.2
Wire rope diameter mm 9.3 12.5 14 15.5 18.5
Drum Diameter(mm) 205 225 280 280 350
Width(mm) 80 125 510 160 180
Main drum rope capacity m 45 80 80 90 100
Second drum rope capacity m 45 100 100 110 130
Electric power Kw 7.5 15 22 30 55
rotate speed m/s 1440 1460 1470 1470 1470

Dimension Length mm 1210 1525 1600 1650 2070
Width mm 565 660 730 820 1010
Height mm 490 620 640 700 890
Weight (main engine) KG 390 660 900 1155 2125

1. Brief description

CD1 electric hoist has only normal speed, which can satisfy the general working requirement.

MD1 electric hoist has one more hoisting motor and one slow speed actuating device, which make the model have two speeds. When it works slowly, it can satisfy the precise task such as precise working of loading and unloading, sand to break-in.

2. Applications

It can travel rotation through the trolley hanging on the I-steel, and install on the single beam crane, gantry crane, jib crane and overhang crane to rise and fall the cargos. So it can be used in factories, mines, wharf, warehouse, freight yards, and shops and so on which need lifting equipment for lifting heavy objects. Such as mining companies and railways, docks, warehouses. It is prohibited to manned.

3. Components

Motor: Hoist Motor is an taper type rotor motor with braking,it is made by Nanjing special motor factory,it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently.

Trolley: It is assembled and has running wheels. Herein, the runner wheels are mounted on top-class sealed ball bearings.

Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation.

Wire Rope: Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric control system: Model CD1 and MD1 is composed of the contactor box,controlling switch,cut-off limiter.the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.

Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting .

Testing: All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate.

If you need other type electric hoist, please tell us, we will be pleased to be of further assistance!

Electric Winch

Quick Details
Place of Origin: Henan, China (Mainland) Brand Name: JJINRUI
Model Number: JK Power Source: Electric
Rope Capacity: Customized Color: Customized
Loading capacity: Customized Pulling speed: Customized
Rope diameter: Customized OEM/ODM: Support
Certification: ISO9001 Motor: YTZR200L-6
Application: Cranes, Boat, Auto ,Construction hoist

Packing & Delivery Detail
MOQ: 1 SET
Package: Hoist packed by wooden case ,crane packed by woven plastic cloth
Port of dispatch: Qingdao/Tianjin/Shanghai/Other
Delivery time: Within 15 working days after the receipt of deposit
Payment: TT/LC/Discussible
Warranty: 12 month

5 Ton Capacity Electric Winch.
Motor
CROMPTON/ GEC/ KIRLOSKER" Make Slipring Crane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr. rated 40% ED as per IS: 325 having 'B' Class insulation.
Drum
Made from Rolled steel as per IS:226 of adequate thickness with side flange. Drum running on Bearing to take adequate rope length.
Shaft
Forged from EN-8 steel machine fitted with Drum. Chassis: Fabricated from joist of adequate size as per IS: 226 to take all shocks. All the stands on the chassis are Boxed type.
Reduction
1st Reduction: through Elecon/Radicon make worm reduction Gear Box totally enclosed running on oil.
2nd Reduction: through open machine cut Gear from carbon steel & pinion made of Alloy Steel duly heat treated.
Break
Electro Magnetic Hydraulic Thruster Brake of reputed make.
Mechanical Bend Brake with screw system with Ferrodo Brake lineing.
Extra safety Ratchet pawl arrangement on the side of the drum for not moving the drum in opposite direction for extra safety.
Coupling
We will provide flex. Brake Drum coupling on the out put of motor & Input of Gear Box.
Flex. coupling pin type on the output shaft of the Gear Box & In put shaft of the pinion.
Controls
Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio.
Control panel in sheet in sheet metal Box for dust, heat & water resistance containing of :
Isolator
Overload Relay
Contector
Single phase preventor
FuseHrc.
Amp. Meter
Voilt Meter (h) Neon Lamp Push Button for start & Stop Resistance Box 10 Minute rating.
Wiring & Pairrting
We will provide all wiring from weather proof ar mured copper cable of adequate size & the Winch will be painted by two coats of primer & Two coats of Grey paint.
Operator seat
We will provided operator seat by the side of controls.
Note
Speed of 5 Ton & 10 Ton winch is 8/1OMTS per minutes.
General Description
SKID Frame Type- Frame made out of heavy steel sections
M.S. Drums
M. S. Gear & Pinion. Teeth Cut on Gear Hobbing Machine for Perfect Pitch.
Reduction through Gear Box and Bull Gear & Pinion.
Hydraulic Thrustor Brake
ElectroMagneticBrake
Electro Magnetic Brake.
Manual Brake
Carbon Steel Shaft
A Safety Ratchet System
All controls within reach of operator.
Variable Speed Motor.
Load & Speed as per Requirement of the Customer.
Detail required for submission by Customer
Rope pull in Tons ( Capacity)
Speed required Mtr./per Min.
Rope size & Length required on Drum.
Available Elec. Current supply.
Description of Application.
Other accessories required with.