Best plastic cold water supply pipe 110mm in buildings Product name PPR cold water pipe Pressusre 1.25 Mpa 1.6 Mpa Specification(mm) 202.0 202.3 252.3 252.8 323.0 323.6 403.7 404.5 504.6 505.6 635.8 637.1 756.9 758.4 908.2 9010.1 11010.0 11012.3 Working temperature -23~30 Standard GB/T18742.2-2002 Connection Hot melting Technics Injection Fitting Elbow,tee,end cap,femal coupling,male coupling,male elbow Advantages 1.Non toxic,environment friendly,can directly used for drinking water 2.Corrosion resistant,rare fouling,can avoid pipe blockage 3.Soft colors and excellent design, suitable for exposed or hidden installation 4.Light weight,easy to installation and lower cost
Material: stainless steel Weight: : 0.3-3.5kg Manufacture process: silica sol casting + machining Description: Used for pipe connection
SIZE:NPS 1/8"-4"(6mm-100mm) RATING:THREADED WOG :2000, 3000 AND 6000 LBS / SOCKET-WELDING WOG 3000,6000,9000 LBS. SPECIFICATION: ASME B 16.11 MATERIAL ï¼?CARBON STEEL ,STAINLESS STEEL,ALLOY STEEL FINISH:GALVANIZED OR BLACK
Our products:Forged high pressure fittings:elbow,coupling,cross, tee,hex nipple, outlet, concentric reducer,swage nipple,bend,boss and so on. Raw material: forged steel; stainless Carbon alloy steel A105, 304(L), 316(L),F5,F11,F22 Pressure: 2000LB,3000LB,6000LB,9000LB Size rang: 1/8"-4" Connection: socket weld(SW) and Threaded(NPT,BSPT, RC, PT)
The PE insulated pipe is made by low density polyethylene. The pipe can be coated with other materials to make it more good looking and resist to corrosion. The main characteristics of it are keeping temperature, endure with heat, resist to corrosion and fire. The pipe can be used in many areas. For example, the outdoor linkage pipes of split type air conditioners, hot water pipe and internal pipes of air-conditioners.
This KLS 1/2 in. x 120 in., 3,500 PSI Hydraulic Hose supplies the right pressure to get you back on task. 1/2 in. diameter x 120 in. long SAE 100R2AT Hydraulic Hose Assembly 1/2 in. NPT Male Pipe Thread at each end 3,500 PSI maximum working pressure
Mine hose assembly supplier Description: Mine hose assembly supplier structure The three-layer structure of the inner rubber layer, skeleton reinforcement layer, and outer rubber layer; due to the special environment of a coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath, and reel. Mine hose assembly supplier characteristics According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance. Mine hose assembly supplier Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Special Hose Assembly for Hydraulic Support Description: Special Hose Assembly for Hydraulic Support structure The three-layer structure of inner rubber layer, skeleton reinforcement layer and outer rubber layer; due to the special environment of coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath and reel. Mine hose assembly factory characteristics: According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance. Mine hose assembly factory Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Size: 20-110mm Pressure: PN20 Color: Green / White / Grey Length: 4 m/ pc Fusion: socket fusion
mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
High Pressure Nylon Resin Hose Description: This product is widely used in various industries because of its high pressure resistance, high temperature resistance, wear resistance, oil resistance, various chemical reagents, anti-aging, and long service life. 1. The pressure braking system of the car; 2. The power steering system of the car; 3. Brake pipeline control system of automobile; 4. Gearbox control system; 5. Construction machinery, such as: hydraulic transmission system and hydraulic control system of excavator, loader, crane; 6. Hydraulic operation and hydraulic control system of mechanical processing equipment; 7. Tubes for high-pressure painting; 8. Pipe for liquid resin transportation.
Product Description: Sand blasting hose is used for conveying sand or other abrasive materials engineered for sand/shot blasting purposes in ordnance factories, steel furniture manufacturing workshops and heavy engineering industries, etc. Tube: High quality wear-resistance rubber. Cover: High quality rubber material is anti-aging and wear resistance. Reinforcement: Multi-layer of spiral fabric reinforcement.
The high pressure steam hose is designed for transfer of steam in many applications, such as fire prevention, heat control and industries where steam must be transferred safely and reliably. It is resistant to bursting, cracking and crushing even under accidental exposure to flame, while being quite flexible and resistant to vibration. It consists of black, smooth, EPDM rubber especially compounded to withstand super heated steam. It is covered with smooth, black and weather abrasion and reinforced with piles of carbon steel wire. Tube: Black, smooth, EPDM rubber especially compounded to withstand super heated steam. Cover: Red, smooth (wrapped) EPDM rubber with excellent resistance to high temperature, weather, abrasion and aging. It is pin-pricked to prevent separation. Reinforcement: Piles of carbon steel wires. Temperature: -40 C to +236 C (-40 F to +456 F).
Tube: Smooth NR/ synthetic rubber, generally color is black Reinforcement: spiral fabric, steel wire spiral layer, Cover: Oil, abration and weather-resistant wrapped synthetic rubber. Performance: 1. Rubber hose pipes are used with dredgers for silt/gravels conveyance. 2. Pipe wall thickness range: from 20mm up to 50mm. 3. The suitable working temperature: from -20�°C to +80�°C. 4. Abrasion-resistant and bending â??resistant. 5. It is convenient to install, flexible to use and safe. Dredge Slurry Suction Hose Applications: installed between the pump and cutter of the dredger, suction the slurry. suction hose &Aamored hose with HB steel ring in, suitable for limestone, granite, coral and mineral, etc.
Automotive hydraulic hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
Rubber hose for gas drainage Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Drilling Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission. In addition,BOPcontrol hose is widely used in these fields.
SAE100 Standard Rubber Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure resistance can reach 70-120Mpa.
Model Number: Reducer Material: Stainless Steel Technics: Forged Connection: Welding Shape: Equal Head Code: Round Product name: Stainless Steel 304/316 Butt Weld Pipe Fittings Concentric Reducer Size: 1/2" to 48" Thickness: sch5 to sch160 Standard: ASME, DIN, JIS, etc Certificate: PED,ISO Delivery time: 30days Packing: Wooden Case
Processing Technology Raw materials entering the factory (re-inspection) Cut into blanks Hot Push Forming Plastic Heat Treatment Machining Groove Surface Treatment Inspection of Finished Products Identification Protection Put In Stock (Note: There is a pickling and passivation process for stainless steel products before urfacetreatment) Size 1/2"-120" Standard ASTM A234 WPB, WPC, WP11, WP12, WP5, WP91, WP22 ASTM A403 WP304, WP304L, WP316, WP316L, WP321 ASTM A420 WPL3, WPL6 API 5L L245(NB), L290(X42), L320(X46), L360(X52), L390(X56), L415(X60), L450(X65), L485(X70), L555(X80) EN 10253-2 P235GH, P265TR2, P265GH, P355NHL245(NB), L290(X42), L320(X46), L360(X52) L390(X56), L415(X60), L450(X65), L485(X70), L555(X80) ASTM A105 A105, A105N ASTM A350 LF1, LF2, LF3 ASTM A694 F42, F45, F50, F52, F56, F60, F65, F70 ASTM A182 F5, F9, F11, F22, F91, F304, F304L, F316, F316L, F316H, F321 F347 F347H Wall Thickness SCH10, SCH20, SCH30, STD, SCH40, SCH60 XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS Color Black, Yellow, Blue, Red. etc as client requirment. Surface Coating Rust-proof oil; Black; Galvanized; Polyethylene Coating; Epoxy Coating, etc Marking Marker permanent Package Ply-Wooden Case for small size Pallet for big size Certificate BV ISO9000,CRN,CE The Third Party Inspection BV, SGS, LOIYD, TUV, and other party alloyed by clients Brand TSZHONGRAN Min Order 1PCS Payment Terms T/T, 100% LC AT SIGHT, 100% LC 30 OR 60DAYS AFTER BL OF DATE, Delivery Time 7-30days according to acutal order. Delivery Port TIANJIN, QINGDAO, SHANGHAI Delivery Ability 3000TONS/MONTH Applicating Paper-marking, Oil and natural gas pipeline, Boiler and heat exchanger, Smelting,Water conservancy, Electric power, Chemical, Pharmaceuticals etc
