Mine Hose Assembly Supplier

Special Hose Assembly for Hydraulic Support Description:


Special Hose Assembly for Hydraulic Support structure

The three-layer structure of inner rubber layer, skeleton reinforcement layer and outer rubber layer; due to the special environment of coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath and reel.

Mine hose assembly factory characteristics:

According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance.


Mine hose assembly factory Application:

There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.

1>Brake hose: SAE J1401 standard
+Motorcycle brake hose: 3.2mm X 10.5mm 1/8"HL
+Automobile brake hose: 3.2mm X 10.5mm 1/8"HL
3.2mm X 12.5mm 1/8"HL
4.8mm X 12.5mm 3/16"HL

2>Air brake hose: SAE J1402 Standard
10mm X 17mm 3/8"HL
10mm X 19mm 3/8"HL
13mm X 22mm 1/2"HL

3>Stainless steel braided brake hose:
3.2MM X 6.5MM
3.2MM X 7.5MM

4>steel tubing for various coating: copper,polish,white zinc,pvf,olive green,etc.

4>Hose assembly: any kinds of hose assembly can supply to you, and made according to OEM No. or your drawings or samples

5>Fittings & brake pipe & brake tube & nuts: any kinds of hose fittings according to your drawings or samples, or our drawings.

6> Hose crimping machine and mould and Stainless steel braided brake hose and Fuel hose, air conditioning hose...

PRODUCT DESCRIPTION
Our company supply specialty hand built hose manufactured from the world's best hose rubber compounds including NR, SBR, NBR, EPDM and silicone. All hoses are designed and manufactured to suit the specific application and therefore the following design factors are considered:
- Pressure
- Wear resistance
- Product temperature
- Chemicals resistance
- Ore or material being transported
- Exposure factors such as UV and Ozone
- Flange arrangement
To achieve the required working pressures, our company mining hose is constructed of woven cord materials such as rayon, polyester or aramid fibers and steel reinforcing components in the form of spiral wire or rings and flanges.
Mining hose is available with inside diameters up to 1200mm and working pressure of 1.4MPa

ROTARY / DRILLING / CEMENT / MUD HOSE
Main Application: The rotary/drilling hose is used in oil drilling industry, bore-hole operation and washing, used on drilling rig for delivering petroleum�¬based fluid: water cement, mud .
Applicable Specs: API Spec 7K Temperature Range: -40F/ +212F -40C / +100C Construction Detail: Inner Tube:Oil and abrasion resistant synthetic rubber
Reinforcement: Multiple high tensile steel wire spirals
Cover:Oil, ozon, hydrocarbon resistant Synthetic rubber

LTD is a top Rubber Air Hose, PVC Air Hose, Hybrid Air Hose, Twin Welding Hose, Garden/Water Hose, Jackhammer Hose, Pressure Washer Hose, Hose Reels and Air Accessories manufacturer in China. With new products - Hybrid PU Air Hose, which combines the both characteristics of Hybrid Hose and Polyurethane Hose, very Lightweight and Durable, keeps extreme Flexible in -58�°F weather conditions. Founded in 2000, we specialize in HOSES & Air Accessories, We have an annual production capacity of 30,000,000 meters, and annual revenue of around US$ 10~30 Million. We have been exporting to North America since 2005, and our clients include Home Depot, Lowe's, Tractor Supply Co., Dewalt, Harbor Freight Tools (CPI), Plews, Wood Industries, Astro Pneumatic, Grip on tools, Forney Industries, Canadian Tire Corporation, Princess Auto, Toolway Industries, Prime line Tools, New-line, Samona, and many others. We also have a number of clients in Europe.

Tunnel mining ventilation hoses

The most important factor in tunnel and mining applications is to pres or vacuum the required air into the tunnel or mining areas. Because of the nature of the tunnel/mining areas, there are turning points and sloped areas. In these cases, techniconnect hoses have higher performance. At bending or turning points, the vertical and horizontal section does not change because of the spiral and the pressure loss is very lower. The most effective, safety and practical way of suction the air from tunnel/mining is techniconnect hoses. The advantages of the hoses are;
Practical, easy installation with connection elements and hanging apparatus
Cross section area does not change in turning or bending points
Vacuum is possible
Long service life
Mechanical endurance factor in underground
Benefit/cost ratio is higher
Lower pressure loss compared with classic air ducts

Jacketed Hose assembly consists of a hose within a hose. An inner (Core Hose) or primary media conveying hose is enclosed or jacketed by a larger diameter hose. The hoses are joined at each end by specially designed fittings so that there is no media pathway between the two hoses.

Jacketed Hose assemblies are often specified when the primary media must be kept at either an elevated or cryogenic temperature. Steam is often circulated through the jacket hose to keep a viscous material in the inner hose hot and easily conveyed. A vacuum can also be pulled on the jacket hose to insulate cryogenic liquids being conveyed in the inner hose.

The media typically is steam, hot oil or hot water to raise the temperature of the fluid moved in the internal hose. Also cold products such as liquid helium or nitrogen can be used to lower the temperature of the fluid with-in the internal hose.
Jacketed hose assembly with inlet and outlet swivel flanges fitted with both side swivel flange) and sometime threaded also use, inlet and out let of jacket hose's fitting can be threaded type also, and length of hose assembly depends upon the how much heat area require to maintain. For more Detail of fitting see the following table

These hoses are used to transfer high density fluid, like bitumen, pre polymers, hot melts etc

INDUSTRIAL HOSE ASSEMMBLIES MANUFACTURERS & SUPPLIERS
We have in-house design facilities for industrial hose assemblies, wherein we regularly manufacture annular normal & heavy-duty stainless steel hoses for highly critical applications. Generally, industrial hose assemblies are tailor-made to meet individual requirements. There are different kinds of standard end fittings connected to the hose and braid as per specific needs. The process consists of assembling the hose and braid of specific lengths, followed by connecting the end-fitting by TIG welding.

For various processes, superior quality industrial hose assemblies with high heat and pressure tolerance are required to transfer fluids and gases. An industrial hose with resistance to different chemicals is also required for a seamless process and quality output. Thus, we offer flexible, durable, and high-performance industrial hoses that'll help reduce production downtime while providing optimal safety

Description
What Do We Offer?
At Aeroflex, we offer highly-engineered industrial hose assemblies, couplings, and accessories for a wide range of applications. We undertake rigorous testing of all hose assemblies before it is shipped to ensure it complies with the highest standards and regulatory requirements. Our hose assemblies are also tested under harsh environmental conditions. This ensures only the best is provided to our clients that maximises their output value while minimizing downtime.

Specifications for Industrial Hose Assemblies
All industrial hose assemblies are custom-made, including the standard specifications of end fitting. Right from the hose length and braid to the temperature range and maximum working pressure, each would differ based on the need of an application. You can email your requirements to us at indiabusiness@aeroflexindia.com or get in touch for further queries.

Advantages of Industrial Hose Assemblies
Industrial hose assemblies have a sturdy construction and are made from the finest grade materials.
The connectors are made from stainless steel and come with interlocking protection.
They are flexible, durable and highly reliable.
They undergo stringent testing to ensure safety and optimal quality assurance as per industry standards.
They have a high tolerance to heat and pressure.
They are corrosion resistant and resistant to abrasive materials.
They also have chemical resistance properties, making them ideal for almost all industrial applications.

Applications of Industrial Hose Assemblies
Industrial hose assemblies are used to convey various fluids (gas, water, chemicals) and even solid material from their source to machines. The applications of industrial hose assemblies include:

Food and Beverage Industry
Material Handling
Construction and Mining
Chemical and Pharmaceuticals
Oil and Gas
Automotive and Steam
Agriculture
General Manufacturing