As a manufacturer and a supplier we produce cementing tools since 1997, and now we have almost 400 workers, the products cover cementing head/plug, stage collar, float equipment, centralizer and so on. Please contact me if you have need,
1.Scope of application Lubricating oil, hydraulic oil, turbine oil, transformer oil, gear oil, cutting oil, cleaning oil, rolling oil, cooling oil, engine oil, guide rail oil, stamping oil, antirust oil, spark engine oil, phosphate oil, water glycol, etc. 2.Working principle The oil purification device is a three-phase separation of particulate matter, oil, and water medium, and the sedimentation separation formed according to different densities, and the sedimentation is accelerated under the action of centrifugal force.Through the centrifuge, the sedimentation acceleration evolves into the circumferential acceleration. The separated material is sent into the heart of the machine, that is, inside the barrate. Under the action of strong centrifugal force, the material passes through the separation interval of a group of disc bundles. The disc wall moves out of the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase flows upward to the centripetal pump; the liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centripetal pump The light and heavy phases are respectively output by the lower centripetal pump and the upper centripetal pump; the heavy slag is discharged regularly; continuous production is implemented. 3.Technical parameters Model Number:LC-YJ-HWM-G Scope of application:Oil-Based Filtration Method:Centrifugal Separation Slag Discharge Mode:Automatic Slag Discharge Start Mode:Soft Start Power Supply Data:Three Phase AC 38V 50Hz Total Power (Kw):48 Control Panel:Siemens Touch Panel Drum Capacity (L):20 Drum Speed (r/min):11600 Centrifugal Effect:99% Working Pressure (Mpa):0.4 Working Noise:â?¤75 dB(A) Maximum Handling Capacity:12000 Recommended Flow (L/H):6000~12000 Working Temperature For Oil ():45 Moisture after Processing (ppm):
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Active content: 42 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric; Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow viscous liquid Ionicity: Cationic pH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 85 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantage This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
The Lake Fishing Magnet is a junk retrieval tool designed to effectively remove metal particles, shavings, and debris from the bottom of the well bore. The process of retrieving small, oddly shaped objects is one of the most frequent and most difficult fishing jobs. Typically, these objects are the result of bit failures that leave cones and cutters in the hole, or are an accumulation of mill cuttings, or are simply accidental droppings of unmillable objects into the hole. In these cases, the fish is nearly always an odd-shaped object that cannot be engaged in the normal manner. Fishing magnets successfully remove these small objects from the hole bottom. The tool's design incorporates generous circulation holes that wash away the cuttings and other debris that other wise would prevent contact with the magnet. Fishing magnets can be run on either wire line or pipe.
Annular Blowout Preventer(Annular BOP) is important equipment for drilling well. It widly used in onshore and offshore drilling, Geothemal driling. We supply three type of annular BOP: Bloted-cover, Wedged-Cover and Latched-cover. All type of annular BOP are strictly manucatured as per API spec 16A, have same reliable quality as other US products. There type are Camaron, shaffer and Hydril in the the word.
API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield Working Pressure: 35Mpa---105MPa API Standerard Product Name: API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield Origin Place:Dongying City,China Assembly: X-Mass Tree Assembly , Valves and other small connections Material:AA, BB, CC, DD, EE, FF and the other Brand:RT Exported to Canada,America,Saudi Arabia,Kuwait,Iraq,UAE,Oman,Pakistan Packing:Pallet or according to your requirement Our service:Technical support of assembly the well head products and we have some other oilfield chemicals such as high temperature foaming agent
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options: The lubricator and riser section range is available with the following options : 3.00â??ID to 9.00â?? ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 �°C Choice of quick union or API flanged connections Choice of bleed port connections Technical Features: On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections.
Features (1). Sucker Rod Wrench available for different size. (2). National best quality with API standard. (3). Short on deliver time. (4). Made from heat-treated alloy steel. (5). Easy to operation. Caution (1). Before use, you should choose wrench in line with the Specification of the rod. (2). After use, it should be cleaned, and pressrved in a cool dry place. (3). After a period of time of use, it should be checked of wear and tear to ensure that the wrench is in the best working condition.
API cementing collar double stage collar with premium thread 1. Structure: 1) All inner parts are made of easily drillable aluminum alloy 2) The device can be connected directly to same type casing 3) Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance 4) Valve seat and valve disk can effectively prevent grout from flowing back 5) Hardness of base material is equivalent to API Spec N-80 6) API spec.Q1 and ISO9000 certification 2. Purpose: It be designed according to the standard of SY/T5476-92, could reduce the mixed slurry, calculate correctly, save the cement and increase cementing quality.
Description Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work. It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations. Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel. We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc. All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU. Specification Material: AISI 4145H premium alloy steel Upset style: EU, IEU or IU Application: 2 3/8" ~ 6 5/8" dill pipes Tool joint connection DP nominal weight lb/ft Steel grade O.D.(in) I.D.(in) Pin tong space(in) Box tong space(in) Pin/Box bevel diameter(in) NC31 10.4 G105 4 1/8 2 7 9 3 61/64 S135 4 3/8 1 5/8 7 9 3 61/64 NC38 13.3 G105 5 2 7/16 8 10 1/2 4 37/64 S135 5 2 1/8 8 10 1/2 4 37/64 NC46 16.6 X95 6 1/4 3 7 10 5 23/32 G105 6 1/4 3 7 10 5 23/32 S135 6 1/4 2 3/4 7 10 5 23/32 NC50 19.5 X95 6 5/8 3 1/4 7 10 6 1/16 G105 6 5/8 3 1/4 7 10 6 1/16 S135 6 5/8 2 3/4 7 10 6 1/16
Gate valves(ball screw operation) The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations. The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism Size:3-1/16", 4-1/16", 5-1/8", 7-1/16" Wp:10, 000psi, 15, 000psi Temperature:l u, pu Mat's:aa-ff psl:1-4 pr:1-2 Honorary certificate Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
Downhole well drilling tool Roller reamer The Roller Reamer is designed for various reaming operation but particularly for various reaming operation but particularly for stabilization purpose when drilling in very abrasive formations. It will fit hole sizes ranging from ?6 to 28?. In addition, each body by simple adjustment of blocks and proper selection of cutters, will suit a wide range of hole sizes. Three different types(T, F, and B) of cutters are offered: Type T: Milled, machined with hardfaced sharp teeth for soft formations. Type F: Milled, machined with hardfaced flat teeth, for medium hard formations. Type B: Equipped with pressed-in tungsten carbide buttons, for hard formations.
2 " API safety relief valve 1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement. 2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed. 3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa). Construction, connecting mode and size are same as SPM equivalent products; The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves. Model Name Rated pressure Connection AQF02-105 2? safety valve 105MPa 2?FIG1502 tool joint pin X 2?LP AQF02-105 2? safety valve 105MPa 2?FIG1502 tool joint pin X 2? tool joint box AQF02-140 2? safety valve 140MPa 2?FIG2002 tool joint pin X 2? tool joint box
API Fully Welded Body Ball Valve Product design and scope Design standard:API 6D Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements. Flange connecting end:ASME B16.5/ASME B16.47 Butt welding connecting end:ASME B16.25/ ASME B31.8 Wall thickness:ASME B16.34 Fireproof test:API 607/API 6FA Inspection and test:API 6D Pressure and temperature rating:ASME B16.34 Product scope:NPS 4NPS 60 CL150~CL1500 Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc. Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc. Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc. -
Float collars and float shoe The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability. The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist. The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
Aimed at pump rod break, stripping, piston dropping without opening oil drainage unit during operation of oil well, no ordinary oil drainage achievement in heavy oil and paraffin troubled well, environment pollution and so on, rotary oil drainage unit is the patent product (patent no. Zl2005200845803) specially designed and developed. It has advantages of simple structure, easy operation and reliable oil drainage,
Technical specifications: Outer diameter: 114.3-508mm Standards: api sepc 5ct, 5b Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125 Connection: stc, ltc, btc and premium connection Inspection: sgs, bv Certification: iso 9001:2000 Delivery lead-time: after received deposit 10-60 days according to the quantity Payment terms: t/t, 100% l/c at sight Port of shipment: shanghai port, qingdao port or other main ports as per requested Quality control: Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery 1. Inquiry evaluation: All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard 2. On-line production supervision: Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production 3. Final product inspection: Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report 4. Logistics survey: Monitor product handling, storage, strapping, transport loading and other logistics chain
Key specifications/special features: Technical specifications: Outer diameter: 60-508mm Standards: api, sepc, 5ct Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125 Connection: stc, ltc, btc and premium connection Inspection: sgs, bv Certification: iso 9001: 2000 Delivery time: after received deposit 10-60 days according to the quantity Payment terms: t/t, 100% l/c at sight Port of shipment: xingang tianjin, shanghai port, guangdong port, ningbo port, qingdao port Quality control: Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
