Dy-10/dy-13/dy-20 80/100/150w laser power supply for reci 1200/1400/1650/1850mm co2 tube Dy-10:80w co2 laser power supply for reci s2 80-90w co2 tube Dy-13:100w co2 laser power supply for reci s4 1000w co2 tube Dy-20:150w co2 laser power supply for reci s6 or s8 130-150w co2 tube 1. Product features: 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with co2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to high or low level signal. The ttl level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5v analog signal or pwm signal. 4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function canprotec power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 3. Specification: Model nody-10dy-13dy-20 Output laser power80-90w100w130-150w Input ac voltageac220v or ac110v
6040 co2 laser engraving machine 40w 4060 co2 laser engraver Features This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry. Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube Features: 1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube. 2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal. 4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst. 5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 40KV Max. Output Current 28mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open circuitProtection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) � Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 270x160x80mm
BR-60W CO2 POWER SUPPLIES Feature 1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power. 2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.� It is very good function for both machine factory and machine users 3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case. 4.This LCD screen CO2� power supply� has� high efficiency and� quick� response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.� 5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not. 6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time. 6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube. Specification lnput� Input voltage AC220V�±10%� (AC110V specified while order) AC frequency 47~440HZ Maximum input power 490W Maximum input current 2.2A Output Maximum output voltage 25KV Maximum output current 28mA (depending� on the laser tubes of different manufacturers) Efficiency More than 90%� (Full load) Response speed Not more than 1ms Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) Insulation lnput-output AC 1500V 1 minutes not more than 10mA lnput-shell AC 1500V 1 minutes not more than10mA Output-shell Connection Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) Environmental Requested Working temperature -10â??~50â?? Storage of temperature -20â??~75â?? Relative Humidity Maximum 85%RH (non-condensing) Altitude 100,000 feet of work 200,000 feet of storage,dose not work Cooling methods Forced air cooling (fan cooling) Dimensions (LxWxH) 210mmx145mmx102mm
Product process: 1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage. 2. Polyethylene PE imported from South Korea as raw material, tasteless. Product Features: It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.
Simple tube-sheet Dual-purpose Fiber Laser Cutting Machine Patent for laser cutting tube center bracket Combine a plane laser cutting machine with a special laser cutting machine for pipes into one, It not only has the function of plane cutting but also can meet the needs of professional pipe cutting. Functions of Fiber Laser Sheet and Pipe Cutting machine Able to realize high-speed, high-precision flat sheet processing Able to cut various circles in different directions and sizes on round tubes Intersecting holes can be machined at each position of the tube Can realize rapid cutting and blanking of pipes The range of processing pipes is large, and some opening and cutting functions of the formed Technical Parameters Laser Power 1000W-6000W Laser Brand IPG or Raytools Laser Wavelength 1070nm Z Axis Move Distance 280mm Positioning accuracy Repeat positioning accuracy Power Supply 380V/50HZ Cooling Mode Water Cooling Operating temperature of machine Operating humidity of machine Machine Weight 4000-9000KG (according to different machine size) Machine Size 8500*3500*1000mm Other machine sizes 3000x1500mm 4000x1500mm 6000x1500mm 8000x1500mm 3000x2000mm 4000x2000mm 6000x2000mm 8000x2000mm
Tube-sheet Dual-purpose Fiber Laser Cutting Machine Patent for laser cutting tube center bracket The professional tube-sheet dual-purpose laser cutting machine is a combination of the advantages of the flat sheet laser cutting machine and the professional tube laser cutting machine. Realize high-speed, high-precision flat and tube blanking and processing. Functions of Professional Fiber Laser Sheet and Tube Cutting Machine It can cut multiple cylindrical intersecting holes of different directions and different diameters on the main pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection between the axis of the branch pipe and the main pipe. It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection between the branch pipe axis and the main pipe axis. Ability to cut the beveled end face at the end of the round tube. It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe. It can cut square pipes and cut 360 degrees. It can cut square holes and waist-shaped holes on round tubes. It can cut various steel pipes. Various circular cuttings can be performed on special-shaped tubes such as square tubes, oval tubes, U-shaped tubes, and rectangular tubes. It can realize quick clamping and automatic centering. It can realize high-speed and high-precision cutting functions such as flat panels, and the flat format can be selected. Technical Parameters Laser Power 1000W-15000W Laser Brand IPG or Raytools Laser Wavelength 1070nm Z Axis Move Distance 280mm Positioning accuracy Repeat positioning accuracy Power Supply 380V/50HZ Cooling Mode Water Cooling Operating temperature of machine Operating humidity of machine Machine Weight 60000-13000KG (according to different machine size) Machine Size 15000*4600*2600mm Other machine size options 3000x1500mm 4000x1500mm 6000x1500mm 8000x1500mm 3000x2000mm 4000x2000mm 6000x2000mm 8000x2000mm
7 Axis Fiber Laser Cutting Machine for Tubes Special laser cutting machine for pipes, consisting of 7 axis and 3 chucks. it is controlled by a bus numerical control system and is equipped with a bus servo motor, realize faster,more stable , zero taillings, which can greatly increase production capacity and save raw materials. Functions of 7 Axis Fiber Laser Cutting Machine for Tubes Able to cut multiple intersecting holes of circular pipes with different directions and different diameters on the main pipe to meet the condition of eccentric and non-eccentric perpendicular intersection between the branch pipe axis and the main pipe. It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection between the branch pipe axis and the main pipe Ability to cut the beveled end face at the end of the round tube It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe Able to cut square pipes and cut 360 degrees Can cut square holes and waist-shaped holes on round pipes Able to cut various steel pipes Able to perform various graphic cutting on heterogeneous tubes such as square tube, oval tube, U-shaped tube, rectangular tube surface, etc. Can realize quick clamping and automatic centering Technical Parameters Laser Power 1000W-6000W Laser Brand IPG or Raytools Laser Wavelength 1070nm Z Axis Move Distance 150mm Positioning accuracy Repeat positioning accuracy Power Supply 380V/50HZ Cooling Mode Water Cooling Operating temperature of machine Operating humidity of machine Machine Weight 6500KG Machine Size 14000*2440*2130mm
5 Axis Fiber Laser Cutting Machine for Tubes Special laser cutting machine for pipes, consisting of 5 axis, It can realize rapid cutting of various special-shaped tubes such as round tubes, square tubes, oval tubes, U-shaped tubes, etc. The whole machine has high performance, high efficiency, and can realize 6-meter-long pipe processing and shaping at one time. It is widely favored by industries such as fitness equipment, furniture, props, automobiles, shelves, and petroleum pipelin Functions of 5 Axis Fiber Laser Cutting Machine for Tubes Able to cut multiple intersecting holes of circular pipes with different directions and different diameters on the main pipe to meet the condition of eccentric and non-eccentric perpendicular intersection between the branch pipe axis and the main pipe. It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection between the branch pipe axis and the main pipe Ability to cut the beveled end face at the end of the round tube It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe Able to cut square pipes and cut 360 degrees Can cut square holes and waist-shaped holes on round pipes Able to cut various steel pipes Able to perform various graphic cutting on heterogeneous tubes such as square tube, oval tube, U-shaped tube, rectangular tube surface, etc. Can realize quick clamping and automatic centering Technical Parameters Laser Power 1000W-6000W Laser Brand IPG or Raytools Laser Wavelength 1070nm Z Axis Move Distance 120mm Positioning accuracy Repeat positioning accuracy Power Supply 380V/50HZ Cooling Mode Water Cooling Operating temperature of machine Operating humidity of machine Machine Weight 4500KG Machine Size 8600*2440*2130mm
Fiber Laser Cutting Machine with Enclosure and Shuttle Tables Machine Patent:ZL2014302043257 XAxis Patent :ZL2016203901860 Exchangeable machine structure (high efficiencyexchange, complete tables exchange in 13 seconds)Fully enclosed structure for metal processing The overall appearance is generous and the structure design is reasonable Adopt import configuration to guarantee high stability and reliability high speed, high efficiency Technical Parameters Laser Power 1000W-15000W LaserBrand IPG or Raytools LaserWavelength 1070nm Z Axis Move Distance 280mm Positioning accuracy +0.03mm/m Repeat positioning accuracy ±0.02mm PowerSupply 380V/50HZ 800-4000KG Maximum bearing capacity (according to different las er power) Codling Mode Operating temperature of machine Operating humidity of machine Water Codling 0-40 5%-90% Machine Weight Machine Size Othermachine size options 7000-22000KG (according todifferent machine size) 9150*2900*2400mm 3000x1500mm 4000x1500mm 6000�?1500mm 8000x1500mm 3000x2000mm 4000x2000mm 6000x2000mm 8000x2000mm
The laser cleaning machine produced by Laser Max Laser is a new generation of high-tech products for surface cleaning. It is very easy to install and operate. The machine needs no chemical reagent, no medium, dust-free and water-free cleaning, with the advantages of automatic focus, crank surface cleaning and high surface cleanliness.Laser cleaning machine can remove the object surface resin, the paint, the oil pollution, Stains, dirt, rust, coatings, coatings and oxide coatings are widely used in the industry, covering ships, steam repairs, rubber molds, high-end machine tools, track and environmental protection. Advantages of laser cleaning Compared with traditional cleaning methods such as mechanical friction cleaning, chemical corrosion cleaning, liquid solid strong impact cleaning and high-frequency ultrasonic cleaning, laser cleaning has obvious advantages. 1. Advantages of environmental protection: laser cleaning is a "green" cleaning method. It does not need to use any chemical agent and cleaning solution. The cleaned waste is basically solid powder. It is small, easy to store and recyclable. It can easily solve the problem of environmental pollution caused by chemical cleaning. 2. Effect advantages: the traditional cleaning method is often contact cleaning, which has mechanical force on the surface of the cleaned object, damages the surface of the object or the cleaning medium is attached to the surface of the cleaned object,which cannot be removed and produces secondary pollution. The non grinding and non-contact of laser cleaning can solve these problems; Laser cleaning can remove various types of pollutants on the surface of various materials and achieve cleanliness that conventional cleaning cannot achieve. It can also selectively clean the pollutants on the material surface without damaging the material surface. 3. Control advantages: the laser can be transmitted through optical fiber, cooperate with manipulator and robot, conveniently realize long-distance operation, and can clean the parts that are not easy to reach by traditional methods, which can ensure the safety of personnel in some dangerous places. 4. Cost advantage: laser cleaning has high efficiency and saves time; Although the one-time investment in the purchase of laser cleaning system is high in the early stage, the cleaning system can be used stably for a long time and has low operation cost. More importantly, it can easily realize automatic operation.
1 - Extensive material processing, smooth cutting edge and burr-free, avoid polishing, Processing high speed, high precision, less waste, high efficiency. 2 - Suitable for large and medium-sized enterprises in the mass production, and also suitable for small enterprises and individual processing. 3 - Operational speed, laser energy real-time tunable, and very easy for customers to operate. 4 - Adopt RECI 150W laser power, one of the best brand in china market 5 - Ruida professional control system for both metals and non-metals
# 3 Year for machinery warranty| 1.5 Year for mian parts # Our technician is able to re-install or set up by remote for free. # Main parts(excluding the consumables) shall be replaced/repaired free of charge, if there is any problem during the warranty period. # Our technician is able to teach you online to run the machine or eliminate the fault for free. # We are able to train your staff after placed order in our factory for free. # We are able to send technician to your workshop to do the installation and training. You will need bear the related costs(flight, visa, hotel, training costs, etc.
Advantages 1) No consumables, no chemical pollution, no noise, energy-saving power 2) No contact, no friction, no stress, minimal damage to the matrix 3) It can clear the pollution particles below the nanometer level and have high cleanliness 4) Fiber optic transmission can move operation, can clean the area which is not easy to reach 5) Synchronous cleaning and synchronous treatment to realize zero discharge of cleaning process 6) Rapid cleaning of heavy pollutants and high-speed cleaning of light pollutants can be achieved. 7) laser cleaning can solve the problems that traditional cleaning methods can not solve. 8) Wide application materials scope. Specification Model AKQ-100 Laser Type LD-Fiber Pulse Formation Q-Switched (Quality factor) Average Power 100W/200W/300W Output Range (If adjustable) 0-100W Pulse-Frequency 10-50 KHz Cleaning Efficiency 12 m2/h Scanning Width 10~80 mm Expected Focal Distance 160mm Fiber Length 5m Cooling Type Water cooling Input Power 220V, 50/60H Power Consumption (W) 2500W (including Chiller) Dimensions 1130mm 600mm 1130mm Weight 240kg
Machine parameter Working area 1300*900mm Control System Cypcut Cutting head WSX / Raytools fiber laser head Guide rail Taiwan HIWIN 30mm linear guide rail Transmission Taiwan APEX gear and rack transmission Electronic Components French Schneider Motor X-axis Japanese Yaskawa servo motor 850w Y-axis Yaskawa servo motor 1800w Z axis Panasonic servo motor 400w Max Speed 120m/min Repeat positioning accuracy ±0.02mm/m Maximum Acceleration 1.0G Min line width 0.1mm Power Requirements 220V/380V, 50/60Hz Cooling Way Water Cooling Machine Operating temperature 0 -40 Graphic Format Supported AI, BMP, DST, DXF, DXP, PL
Promotion Price Fiber Laser Cutting Metal Machine Laser Metal Cutter 6mm Carbon Steel Lesar Cutting Machine With High Speed adopts RAYCUS/ IPG laser source which has international advanced laser technology. Equipped with an efficient transmission system by Taiwan high-precision gear rack after grinding process and high-precision linear guide. Advanced Au3tech control system, group into high precision CNC fiber laser cutting machine. Main Features of Fiber Laser Cutting Machine 1 - Application of gantry structure and integrated cast cross-girder to achieve higher rigidity, stability, shock resistance. 2 - High-performance laser source and stable operating Au3tech system which makes the best cutting effect. 3 - The machine owns a perfect cooling system, lubrication system, and dust removal system, to ensure that it can operate stably, efficiently, and durably. 4 - The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality. 5 - The specialized CAD / CAM automatic programming software and automatic nesting software aim to maximally save raw materials.
Promotion Price Fiber Laser Cutting Metal Machine Laser Metal Cutter 6mm Carbon Steel Lesar Cutting Machine With High Speed adopts RAYCUS/ IPG laser source which has international advanced laser technology. Equipped with an efficient transmission system by Taiwan high-precision gear rack after grinding process and high-precision linear guide. Advanced Au3tech control system, group into high precision CNC fiber laser cutting machine. Main Features of Fiber Laser Cutting Machine 1 - Application of gantry structure and integrated cast cross-girder to achieve higher rigidity, stability, shock resistance. 2 - High-performance laser source and stable operating Au3tech system which makes the best cutting effect. 3 - The machine owns a perfect cooling system, lubrication system, and dust removal system, to ensure that it can operate stably, efficiently, and durably. 4 - The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality.
AKJ1530FB is an metal fiber laser cutting machine, which is widely used for metal material cutting. It adopts a fully enclosed design, which is convenient for smoke exhaust when the machine is working, and is more environmentally friendly. Specification Data of Fiber Laser Cutter Item Specification Machine Model AKJ1530FB Working area 1500*3000mm Laser generator brand Reci/ JPT/ Raycus/ MAX/ IPG optional Laser Power 1500w/ 2000w/ 3000w/ 4000w/ 6000w /8000W 12KW optional Control system Cypcut controller Cutting head Raytools autofocus cutting head Transmission Taiwan YYC/ APEX/ VASTUN rack and pinion Motor and driver Yaskawa servo motor and driver Reducer French Motoreducer reducer Cooling way Water cooling Voltage 220V 1P/380V 3P, 50/60Hz
Co2 laser cutting laser cutter laser engraver product description: Main features 1 - Aluminum knife or honeycomb table. Two kinds of tables are available for different materials. 2 - CO2 Glass sealed laser tube China famous brand (EFR, RECI), good beam mode stability, long service time. 3 - Imported lens and mirrors. High transmittance, good focusing, reflection effect. 4 - Ruida Control system support online/offline working, English language system, adjustable cutting speed and power. 5 High accuracy stepper motors and drivers. Belt transmission. 6 - Taiwan Hiwin Linear square guide rails, higher precision. 7 - You can choose CCD CAMERA SYSTEM, it can do Auto Nesting + Auto Scanning + Auto position recognition.
Model AK1325F Laser power Wuhan Raycus fiber 20W/30W/50W/100W Cooling system Air cooling Working area 1300*2500mm Control software Taiwan Markingmate2000 Scanner head Beijing sino-galvo with red point Power-supply Taiwan MEAN WELL(USA) Field lens Nanjing Wavelength Working table PVC adjusting table Transmission system XY axis gear transmission, Z axis Taiwan TBI ballscrew transmission Laser Wavelength 1060nm Response time 0.5ms Frequency of pulse 20-100KHz Max marking depth 0.8mm Marking speed 7000mm/s Marking lines 1-10 lines(in the marking area) Minimum line width 10 micron Minimum character 0.15mm Repeatability accuracy �±0.002mm Resolution ratio 0.1mm Marking content Text, pattern, date, bar code, etc Operation system Microsoft Windows XP Graphic format supported bmp, jpg, gif, tga, png, tif, ai, dxf, dst, plt, etc. Operation temperature 5 -40 Relative moisture 90%, no fog Supply Voltage 220V/50Hz/10A Package Standard shipping export plywood case with reinforced type.
Machine Parts Show for Fiber Laser Cleaning Machine Laser Rust Cleaning For Rust Remove Hanwei laser cleaning head;10m cable 15m etc, can be customised Hanwei control system with touch screen ;operator button, Emergency button Raycus /Reci/IPG/JPT laser generator ;water chillier for generator and laser head Machine Application for Fiber Laser Cleaning Machine Laser Rust Cleaning For Rust Remove Laser cleaning machine can remove the object surface resin, the paint, the oil pollution, Stains, dirt, rust, coatings, coatings and oxide coatings are widely used in the industry, covering ships, steam repairs, rubber molds, high-end machine tools, track and environmental protection.