Shopping bag t-shirt bag machine equipment
Plastic injection moulding machine
Clamping force:80ton-2200ton Shot weight:80g-20000g
Plastic injection molding machine Clamping force:80ton-2200ton Shot weight:80g-20000g Container
High-speed injection molding machine The machine's cycle time is very short (2.6 seconds-3.6 seconds) with a high injection pressure (to be possible to reach 240mpa) and a high-speed injection (to be possible to reach 600mm/s), it can be used to produce the thin-wall products, especially the thin-wall snack boxes and containers (with the wall thickness of 0.4mm).
Precision machining parts Requested by the vendor
Hose forming machine Pipe welding machine can weld pipe from dn8-dn150mm and dn80-dn400mm Helix hose forming machine can make helix hose from dn8-dn50mm Annular hose forming machine can make annular hose from dn20-dn400mm Mechanical hose forming machine
3-color injection machine for strap Features: Clamping system 1.With two-step high-speed mould-clamping system, the clamping force is even to protect and extend mould life. 2.Equipped with strengthened c-type clamping mechanism, the product is not with burr easily; Hydraulic system 1.Utilizes high-efficiency double-vane pump hydraulic circuit. 2.Adops proportion valve to coordinate the microcomputer, allowing precise control of the pressure and flow rate ; Injection system 1.Utilizes high-torque hydraulic motor to drive screw ; turning speed can be adjusted in accordance with requirements of various materials 2.Equipped with one station bicolor injection system. The two injectors inject simultaneously to one mould station. It is high efficiency f=saving time and easy operation; Controlling system 1.The main control panel utilizes a microcomputer system to display the injection volume and pressure on line. 2.It is allowing individual injection pressure control for each station. Accessories Equipped with high-efficiency water-cooling circulation system.
Blow molding machine Productivity Depend on bottle design3000-4000pcs/h Mould4 cavities4cavities Bottle diameter20-100mm Height50-350mm Neck diameter15-32mm Mould thick240mm Mould 500*500mm Utilities Voltagefrequency380/220v 3phase 50/60hz Power48kw Consumption power14kw Operation air1.6m3/min Blow air2.0m3/min Cooling water20-30l/min Machine sizel*w*h1908*1858*1920mm Machine weight 3600kg Auxiliary equipmentpre-form unscrambled is equipped as standard Resin available pet Name volume (m3) gross weight (t) Blow molding machine8.883.00 Preferm unscrambler5.700.25 Moulds 0.120.20 Lp air compressor 1.740.50 Hp air compressor 5.350.96 Air drier 0.500.18 Air cooler 0.520.18 Air storage tank 1.560.30 Total 24.375.57
Cutting machine, jointing machine
Memo holder Features: 1) material: acrylic 2) suitable for office 3) many color available 4) size: 8 x 8.5 x 8.6cm
Memo holder Features: 1) material: acrylic 2) suitable for office 3) many color available 4) size: 8 x 8.5 x 8.6cm
Eva injection moulding machine Mould-holder Number of stations No 6 8 Clamping force Kn 170 Mould-holder dimensions Mm 290*500*2 290*530*2 Mould height Mm 120/125/145/165/180/190/200 120/125/145/165/180/190/200 Max: Opening stroke of the mould-holder Mm 340(mold thickness)/120mm 340(mold thickness)/120mm Heating plate No 4*4 4*4 Heating type Heater/ Heater/ Heating power (each station) Kw 10.4 10.4 Injection unit Screw diameter No 2 2 Screw speed Mm 60 65 Max. Injection volume Cm 3 950 1100 Screw sped Rpm 0-150 Adjustable 0-150 Adjustable Thermal zone of barrel No 4 4 Injection pressure Bar/cm2 1130 1130 Power consumption Injection unit heating Kw 15.6 15.6 Heating plate Kw 62.4 104 Motor for hydraulic Kw 59 59 Total electric consumption Kw 137 178.6 Machine dimension M 9.20*4.5*2.73 12*4.50*2.70 Weight (Approximate) Tons 26 38
Eva injection moulding machine ItemUnitLD200682LD201082 Mould-holder Number of stationsNo68 Clamping forceKn170 Mould-holder dimensionsMm290*500*2290*530*2 Mould heightMm120/125/145/165/180/190/200120/125/145/165/180/190/200 Max: Opening stroke of the mould-holderMm340(mold thickness)/120mm340(mold thickness)/120mm Heating plateNo4*44*4 Heating typeHeater/Heater/ Heating power(each station)Kw10.410.4 Injection unit Screw diameterNo22 Screw speedMm6065 Max. Injection volumeCm39501100 Screw spedRpm0-150Adjustable0-150Adjustable Thermal zone of barrelNo44 Injection pressureBar/cm211301130 Power consumption Injection unit heatingKw15.615.6 Heating plateKw62.4104 Motor for hydraulicKw5959 Total electric consumptionKw137178.6 Machine dimensionM9.20*4.5*2.7312*4.50*2.70
Model Ld-y3-6Ld-y3-8 (injection colume)cm31/180, 2/1101/180·+2/110 (clamping force)ton6565 (diameter of screw)mm1/ft40·+2/ft351/ft40·+2/ft35 (oil pump engine)kw7.5*27.5*2 (heating powel)kw5*3·+155*3·+15 (machine size)m4.2*2*2.74.5*2.3*2.7 (weight)ton55.5
Blow molding machine Main features: 1 pneumatic elements (bosch & burkert brand) are extremely reliable. 2 advanced plc control system with a use-friendly "soft-touch" interface. 3 time-control precision of plc up to 0.01second 4 using infrared reheat units, have high heating efficiency of perform. 5 heating temperature are adjustable according to different preform. 6 heating zones can be increase/decrease when required. 7 fast, low cost production changeovers. Simple installation & startup adjustment The more information-: h.Ttp://ww w.Plastic-machine-china.Com/blow_molding_machine/automatic_molding_machine_rab001.Html
Main features: 1 pneumatic elements (bosch & burkert brand) are extremely reliable. 2 advanced plc control system with a use-friendly "soft-touch" interface. 3 time-control precision of plc up to 0.01second 4 using infrared reheat units, have high heating efficiency of perform. 5 heating temperature are adjustable according to different preform. 6 heating zones can be increase/decrease when required. 7 fast, low cost production changeovers. Simple installation & startup adjustment The more information-: h.Ttp://ww w.Plastic-machine-china.Com/blow_molding_machine/automatic_molding_machine_rab001.Html
Machines introductionp: Lastic injection molding machine is an important equipment which can inject hot plasticity plastic and hot getting firm plastic after heating and making various kinds of plastics products. The plastics industry is a new developing industry , though the developing history of injecting molding machine is still very young. With the development of science and technology, the plastic injection molding machine have already developed into a relatively ripe machines. Hydraulic systemsystem pressure and flow are controlled through proportional valves quick mould clamping , multiple optional function ports are reserved for customers additional demands incorporated with hydraulic logic system to higher sensitivity and more reliability. Clamping unitthe five-point double locking mechanism is optimized designed for the toggle system, the platens apply box structure design with high rigidity, which embodies best clamping speed and magnifying ratio. Spacious safe guard enables to access larger mould, and low pressure mould protection performances in an extreme sensitivity level. Electric systemthe named professional computer controller, with large lcd, for easy operation is controlled via linear position transducers. The dustproof close cabinet improves the controller environment. About the more information of the machinery that you mentioned , please visit our web site w ww.Plastic-machine-china.C om, or w ww.Chinariway.C om . Else , you can send email to us: master#riwaygroup.Com .
Injection mould Brief of feature and machine technical: 1) Computer-aid-design systemour CAD system is an interactive system, by which our designer could make a timely modify after receiving the customer??s idea. In this system, we mainly adopts the following software: Auto CAD, Pro-engineer and Solidworks etc. 2) Parts' Standardization in the course of designing and manufacture the parts, we are always trying our best to produce standardization parts and standardization spare parts in order to make maintain more easy and make all parts could be changed each other freely. 3) Machine Equipmentin order to raise our products?? quality, we introduce advanced CNC center from Taiwan, Japan and Germany. It has promoted our product quality a jump. 4) Mold Frame:the mold frame machined by CNC center, its position tolerance in every two cavities below 0.01mm. It makes sure the assemble precision of the injection mold. 5) Key partsafter a date using time, most of the injection mold produce by other factories would occur eccentricity problem, but our client could avoid this worry, because our unique eccentricity-rectified system could eliminate this problem before it emerges. 6) Eccentricity-rectified SystemThose key parts (cavity core, cavity and half-ring of neck) entirely made of high quality mold steel from Germany, it??s rigidity up to HRC42?a45m after heat treatment, which ensure the finished plastic products?? precise and injection mold??s using life effectively. 7) Hot Rrunner System hot runner system is the key technical of producing the prefrom injection mold. Independently controlled hot runner nozzle makes the prefrom??s molding course on controlling more easily. 8) Cooling Systemthere is so high efficient in our special designed cooling system, it suits for long time automatic production with normal temperature water, if combined with water chiller, the result will better. --the more infomation-- ht.tp://w.ww.chinariway.co m/Plastic_mold/Plastic_mold_Injection_mold_IM001.asp About the more information of the machinery that you mentioned , please visit our web site w ww.plastic-machine-china.c om, or w ww.chinariway.c om . else , you can send email to us: master#RiwayGroup.com .
Hb plastic injection molding machines We is a specialized production base of hb series plastic injection molding machines and its leading products include dozens of specifications with injection capacity ranging between 45g-10, 000g and mold clamping force ranging between 400kn-20, 000kn.
