Planet roller extruder is composed of central shaft, planet shaft, rolling stuff barrel, case, heating and cooling parts, rozzel, and so on. The structure uses model system, and has good flexibility. Contacting area is five times previous extruders of single or two shafts and section shape is highly dispersed and uniform, so high quality products are obtained. JT series of planet screw extruder mainly are used for manufacturing thermal sesitivity materials hard and soft PVC and also for ABS, TPO, TPU, and the mixture of filler polyalkene and bond. Characterizes good plasticization, self-clean, high productility, long useful life and so on.
SJ scries of single-screw rod extruder is outfitted with all kind of screws which applies for processing PVC, PE, PPR, and PEX material, etc. It has such features as high speed revolution, even plasticization, high output, and small and beautiful shape with the devices of air expelling and water cooling, temperature auto-control and stepless speed regulation. The extruders are equipped with several kinds of machine head and auxiliary machine which are suitable for processing thermoplastic products such as membrane soft(hard)pipe, rod, board, sheet and so on.
FUGE ceramic core injection machine helps you to build the most solid and precise ceramic core pieces. Our ceramic core injection machine owns 7 independent temperatures control zone as to avoid any bubbles or air pockets inside the ceramic cores. The ceramic core pattern out of our ceramic core injection machine has been approved by many turbine blades manufacturers. FUGE injection machine becomes the most advanced injection machine in this industry. Key features: Operation: Easy to operate in manual and automatic modes . Reasonable structure: C-Frame to save space . Convenience : HMI is to display the parameters of auto setting pressure . Multi-protection: It equipped with multi-protection for nozzle position , overpressure, dual temperature , pinch hand . Advanced Control System: Precisely control temperature,flow and pressure for injecting , to ensure the qualify of ceramic cores
FUGE wax injection machine is specially designed for producing small size, high precision and complicated wax patterns in the investment casting process. FUGE provides a wide range of wax injection machine and become the leading wax injection machine manufacturers in the industry. FUGE wax injection machine is widely used in aerospace investment casting and high end precision casting area. FUGE wax injection machine features : Advanced Control System: Independent temperature control partitions(control temperature for wax of partitions);Accurate wax flow and Injection Pressure. Convenience : Maximum memory is 50 sets parameters . Safety : Auto alarm system to fix faults in time
Moulding punch This series of punches are made from the best quality steel, which is specially selected. Its edge is sharper and more durable than the usual punches. Based on the original design, we have developed series of newly products; finished tube punch, finished label punch, cup punch, side punch, pointed punch and moulding saw. 50 pcs/bag 100 pcs/bag.
uge wax injection machine has types like 10T double position column type, 25T single position type, 50T single position C type, 100T single position C type and other specifications, the wax storage cylinder volume is able to reach 113L. And we also offer customization according to customers specific parameters . Our equipment has the following advantages Advanced control system the machine is equipped with independent temperature control area, wax temperature partition control area, accurately controlling the wax material�¢??s pressure and wax inflow amount Convenient the parameter data of injection process of 50 sets of molds can be stored at the same time, which greatly saves the time of repeated input and improves the overall efficiency Safety this model has the automatic alarm function, in any part during the production which is beyond its control limit, it will automatically send warning or immediately prohibit the equipments operation. user friendly optional automatic wax box, automatic wax absorption and wax melting, reduce manual operation, convenient and quick. This figure below is the model 25T wax injection equipment
Ceramic injection machine FUGE ceramic core injection machine can helps you to build the most solid and precise ceramic core pieces. Our ceramic core injection machine owns 7 independent temperatures control zone. The ceramic core pattern out of our ceramic core injection machine has been tested by many turbine blades manufacturers. They highly prized our core injection machine for its precise and steady performance during work. Operation: Easy to operate in manual and automatic modes . Reasonable structure: C-Frame to save space . Convenience : HMI is to display the parameters of auto setting pressure . Multi-protection: It equipped with multi-protection for nozzle position , overpressure, dual temperature , pinch hand . Advanced Control System: Precisely control temperature,flow and pressure for injecting , to ensure the qualify of ceramic cores. Description Parameters Model FG-TXJ35T FG-TXJ50T Max. Clamp force 35T 50T Platen stroke 535mm 535mm Injection Pressure 0.35-8MPaï¼?Adjustableï¼? 0.35-8MPaï¼?Adjustableï¼? Single Shot Capacity 3.2Lï¼?Adjustableï¼? 3.2Lï¼?Adjustableï¼? Ceramic Reservoir Capacity 76L 76L Air pressure 0.6MPa(Dry and clean air ) 0.6MPa(Dry and clean air ) Electrical Standard 380V 50Hz 3ph 18KW 380V 50Hz 3ph 30KW Dimension LXWXH 1450mmX2224mmX2996mm 150mmX2355mmX3016mm
Wax injection machine FUGE wax injection machine is special designed for producing small size, high precision and complicated wax patterns in the investment casting process. Our wax injection machine was widely used in aerospace investment casting and high end precision casting area. FUGE wax injection machine features : Advanced Control System: Independent temperature control partitions(control temperature for wax of partitions);Accurate wax flow and Injection Pressure. Convenience : Maximum memory is 50 sets parameters . Safety : Auto alarm system to fix faults in time. No. Description Specification 1 Model FG-ZLJ10 FG-ZLJ25 FG-ZLJ50 FG-ZLJ100 2 Construction Double Station/Pillars Single Station /C type Single Station /C type Single Station /C type 3 Clamp Force 10 ton 9-25 ton 9-50 ton 100 ton 4 Wax Reservoir Capacity 113L 113L 113L 113L 5 Single Shot Capacity 1.2 L/station 0ï½?2.5 L 0ï½?6.5 L 0ï½?6.5 6 Injection Pressure 3.5 â?? 70 bar 3.5 â?? 70 bar 3.5 â?? 70 bar 3.5 â?? 70 bar 7 Electrical Standard 380V�±10%, 50�±2Hz, 3ph 380V�±10%, 50�±2Hz, 3ph 380V�±10%, 50�±2Hz, 3ph 380V�±10%, 50�±2Hz, 3ph 8 Power 19.5 KVA 14.5 KVA 14.5 KVA 17 KVA 9 Air requirement 5.3 bar 5.3 bar 5.3 bar 5.3 bar 10 Telecommunication Optional Optional Optional Optional
TPU (Thermoplasticpolyurethanes), hot plasticity TPU elastomer, TPU film is on the basis of the TPU granular material, through the flow process made into film. Gwell machinery TPU film production line has been combined with the group's years of equipment manufacturing experience, and at the same time learned from the production experience of many polyurethane TPU manufacturers, to adapt to the market continuous improvement, innovation and gradually reach the industry position. The equipment produces TPU with a width of 1372-1520mm and a thickness of 0.02-3.0mm. One or more single screw extruders can be used for co-extrusion. Each extruder is divided into 8 temperature control zones for accurate temperature control. Maximum output up to 600KG/H, single-layer, A/B/A or A/B distribution mode. It can meet the upper and lower two layers at the same time covered from the membrane, attached cloth. By adopting PLC overall control, only one person can easily control. Key parts disassembly and replacement is convenient, user-friendly. Reserved remote control port can be global remote to achieve synchronous monitoring, which is high cost performance. Products with high transparency, less crystal point, no air bubble. Welcome to contact us for more information. TPU film not only has excellent tension, toughness and aging resistance, and is a mature environmental protection materials. At present, TPU has been widely used in: shoes, clothing, inflatable toys, water and underwater sports equipment, medical equipment, fitness equipment, car chair materials, umbrellas, leather cases, bags, car clothes coated. Water-proof and moisture-permeable TPU film is used with various fabrics to achieve water-proof and moisture-permeable effects.
Characteristics of Gwell EVA film production line: (1) EVA single screw extruder is used for extrusion, and the barrel constant temperature circulating water cooling system solves the technical difficulties of EVA plasticizing and non-crosslinking. (2) Double-sided embossing is adopted for the roller body, and technical difficulties of adhesive roller are solved. (3) The cooling part adopts the cooling roller and the stress relief cold bed to make the film run smoothly and fully finalize the design, ensuring the shrinkage rate is less than 3%. (4) The whole line adopts PLC automatic control to realize man-machine interface operation. (5) The production line is equipped with online quality monitoring and control system to ensure the product qualification rate. (6) Patented micro-tension winding machine, the line speed of the whole production line can reach 14m/min
Max. Product Volume L 12L/1;5L/2 Dry cycle PC/H 600x2 Screw diameter MM 90 screw L/D ratio L/D 25 screw motor power KW 37 screw heating capacity KW 6.8 No. of heating zone Zone 4 output of HDPE KG/H 130-150 oil pump driver power KW 18.5 clamping force KN 160 mold stroke MM 240-600 size of mold(W*H) MM 550x500 Moving distance MM 600 Max. Die diameter(W*H) MM 220 Die heat capacity KW 3.5-5.3 Blowing pressure MPA 0.6-0.8 Air volume M3/Min 0.8 Cooling water pressure MPA 0.5 water consumption L/Min 80 weight of machine Ton 12 size of machine M 4.5x3.3x2.8
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Specialized in producing customized plastic bottle for food/sauce/cooking oil/etc; cosmetic containers are also available, please contact for more details!
Hot Chamber injection die casting machine is used to produce precision castings, such as buckles and accessories for the leather industry, garment industry and electrical appliances, promotion gifts, medal, jewelry from low-melting zinc alloy and lead alloy. Structure The hot chamber injection die machine consists of die open/close mechanism, injection mechanism, ejection system, spray system, cooling system, metal melting furnace, control system, etc. Features 1.Compact design casting and furnace into one unit. 2.Injection system with electric heating nozzle 3.Pneumatic sweeping release spray nozzle. 4.Hydraulic injection, clamping and ejection. 5.Die stroke adjustable. 6.Injection stroke adjustable. 7.Hydrautic nozzle engaging. 8.Gear type hydraulic adjustment for small to big castings. 9. Metal melting furnace can be heated by oil or electric to user?s option. 10. Each mechanical action is interlocked in electric to ensure the normal operation and safe production for manual, semi-auto or full-auto Unit KTHIC5T KTHIC15T KTHIC25T KTHIC35T KTHIC88T Die clamping forceKN 50 150 250 350 880 Tie bar Diametermm 25 35 40 45 60 Die strokemm 70 115 135 140 250 Tie bar spacemm 130*100 235*245 240*260 305*220 540*580 Die thicknessmm 24.5-76 130-230 130-260 130-280 150-360 Injection strokemm 60 60 85 95 130 Injection forceKN 11.7 150 250 350 880 Injection plunger diamm 25 35 38 42 45 Effective Injection weight 150 200 500 700 1020 Sweep strokemm 200 200 250 300 Crucible capacity(zinc)Kg 90 70 160 160 360 Accumulator capacity L 10 6.3 10 16 20 ldle loop S 2.5 3.0 4.5 4.5 8 Nozzle heatingKW 1.0 1.0 1.5 1.5 2.5 Furnace heatingKW 6.0 8.5 11.5 11.5 21.0 Motor Power KW 4.0 4.0 5.5 7.5 11 Hydraulic PressureMpa 5-7 10-14
Zhejiang keli plastic machinery co.,ltd has many types of IBM machine,such as SZCX130/30T,SZCX160/45T,SZCX250/60T,SZCX300/70X,SZCX700/135X.We have more than 20years in packaging field.any questions,
zhejiang keli plastic machinery co.,ltd is specilized in one step injection blow molding machine and injection blow mold more than 20 years.the machine is widely used in food,cosmetic,pharmaceutical packaging field.
1.Forming stations:15 stations 2.Forming speed:3-5m/min 3.Frame of machine:350h steel 4.Main motor power:4kw 5.Pump station:4kw
5L, 10L extrusion blow molding machine JN-90U double station single die head for 10L ,1 cavity double die head for 5L, 2cavity The machine is used to produce the bottles, engine oil bottle, water container etc. Welcome inquiry!
CPP/CPE cast film extrusion line adopts the method of single-extruder or multi-extruder co-extrusion to produce single-layer or multi-layer co-extrusion film, and multipliers can be used to realize the production of the maximum 72-layer film. All imported metering pumps, digital precise control of material percentage can achieve the precise input of special materials and reduce the cost. Application: Food packaging: product packaging with higher requirements on display effect, such as bread, dry food, etc. It can be used to twist the packaging of candies and snacks, etc. After special surface treatment, it can produce metalic reflective film, to package fast food and so on.
1. POE has the general characteristics of thermoplastic elastomers. The flexible chain crimp structure of octene and the crystalline ethylene chain serve as physical crosslinking points, so that it has both excellent toughness and good processability. 2. Low price and relatively small density, so low volume price; 3. Excellent heat and cold resistance, wide range of operating temperature; 4. Good weather resistance and aging resistance. Because there is no unsaturated double bond in the molecular structure of POE plastics, it has excellent aging resistance. 5. Oil resistance, compression resistance and abrasion resistance are not so good; 6. POE plastics have narrow molecular distribution, good fluidity and good compatibility with polyolefin. 7. Good fluidity not only can improve the dispersion effect of filler, but also can improve the strength of products weld mark.