Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features of jacketed glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief about glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250°C for high temperature experiments, and limit temperature of -60°C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Laboratory Hot Plate With N ylon+GF Work Plate Material
Silicone fiberglass sleeving is braided into tubes with non-alkali fiberglass,and the painted with silicone through high temperature.It has such features as excellent electricitry-avoidness,flame off-self and flexibilty.It is widely used in insulating protection of H&N grade automobile,shipbuilding,electrical machinery,home appliance,electric and heat equipment,special lightware and internal wirese bunching of TV and electronic equipment,etc.
Silicone rubber fiberglass sleeving (inside fiber outside rubber),woven as sleeving by non-alkali fiberglass and coated with silicone rubber in high temperature.It has excellent dielectricity automatic quench and softness,widely used in insulation protection of internal line cluster in H&N machinery,household electrical appliance,electric and heat device,special illuminations,TV set and electric instrument.
Supplier of fiber glass for oven,Customized according to your CAD or PDF
Products description: vacuum plain blood collection tube non-additive blood tube 1.Material:PET/glass tube 2.Specification:13*75mm,13*100mm,16*100mm 3.Volume:Volume:2ml-10ml 4.Additive: Non-additive 5.Certificate:CE & ISO 13485 certificate approved 6.Packing:Customized production as requested. Normal carton size as follows: 100pcs/foam tray,1200pcs/carton 13x75mm: 515*360*183mm/1200pcs 13*100mm: 515*360*233mm/1200pcs 16*100mm:580*390*233mm/1200pc 7.Certificate:CE & ISO13485 certificate approved 8.Tray material: Foam 9. Cap color:red 10.Delivery time:15-25 days depend on order size 11.Label and logo printing: as requested 12.Shelf time: PET-18 months, glass-24months 13.Storage: No direct sunlight at room temperature You are warmly welcome to visit our company and we expect highly to win-win cooperation with you! Now contact me: Felix Ma
Hawach supply standard-certified automatic vials, caps and septa at no additional cost. Ensuring that with vials from Hawach you will achieve consistent, reliable and reproducible results time after time, thereby bringing high quality with the most cost-effective to all of our clients. All of our vials, caps, and septa are fully guaranteed to work in your autosampler. Hawach sample vials include: screw top, crimp top, snap top sample vials three types.
Working Principle of laboratory ball mill When the laboratory ball mill works, motor and speed reducer transmit torque force to big and small gears of laboratory ball mill, so the barrel rotates.When the barrel rotates, Steel balls or other grinding media in the barrel are lifted to a certain height and fall down freely, so materials in the barrel are impacted. Grinding media mixing with materials impact and grind materials continuously. The grinding media and materials impact and grind each other when the laboratory ball mill rotates continuously. The final product will be discharged from outlet when it meets the request, so the grinding process is finished application range, simple structure and convenient maintenance.
Description &Application of Laboratory pulverizer for mining Laboratory Laboratory pulverizer for mining is a small lab grinding machine for grinding the ore/material samples into powder, which has been widely used in the laboratory of the geology, mining, metallurgy, coal, power, chemistry and building industries, for the none pollution sample testing. The Laboratory pulverizer for mining gets an automatic dust proof and a pot anti-loose device, which provide the machine advantages of low noise, no dust, and easy operation. The machine adapt high frequency vibrating grinding method to make the power fine and event, no need screening and shrinking, prevent sample mixing. This machine gets a simple structure, nice outlook , small volume, with a high efficiency, the output material is fine and evenly, which could meet the demand of education and research department. no need install and adjusting. Could be used in any location, it s one of the best sampling machines for laboratory use.
Quick information Place of origin: china Description Description Fiberglass yarn Fiberglass yarn is electrical insulation materials, electronic industrial fabrics , tubes and other industrial fabric raw Materials.It is widely used for weaving all kinds of fabrics in the scope of reinforcement, insulation, corrosion resis-tance, heat resistance and so on. Price Price condition : fobprice : us d.2 / sqm Packaging & delivery Packing :opp bag then pla stic wove 10-15 days after received advanced paymentminimum order : 5000 s qm supply ability : 70000 sqm per day. -
Quick information Place of origin: china Description Pvc coated fiberglass yarn(pvc fiberglass yarn) Based on fiberglass yarn, coating pvc which meet european unions requirement of environment protection on each filament of yarn. Diameter: 0.28mm, 0.33mm, 0.35mm Weight: 2.5kg/bobbin If you have special requirement, we can also process it. Color: white, black, green, yellow, gray, greyish white (warp: gray and weft: white). Specifications Based on fiberglass yarn, coating pvc which meet european unions requirement of environment protection on each filament of yarn. Detailed product description Pvc coated fiberglass yarn: 1.High anti-corrosion property 2.High tensile strength 3.Long lifetime 4. Used to make fiberglass insect/window screen and other items etc Product description Based on fiberglass yarn, coating pvc which meet european unions requirement of environment protection on each filament of yarn. Diameter: 0.28mm, 0.33mm, 0.35mm Weight: 2.5kg/bobbin If you have special requirement, we can also process it. Color: white, black, green, yellow, gray, greyish white (warp: gray and weft: white). Price Price condition : fobprice : usd.2 / sqm Packaging & delivery Packing : opp bag then plastic woven bag or cartons.Delivery lead time : 10-15 days after received advanced paymentminimum order : 5000 sqmsupply ability : 70000 sqm per day -
Quick information Place of origin: china Description Plisse insect screen The plisse insect screens have now become a must in homes whether they are new buildings or restored buildings, and offer adequate protection against various insects. Plisse insect screen is different from traditional screens, is a revolutionary product for windows and doors, offering excellent service, great strength and mainly top quality. Our company would offer a complete range of products for doors and windows with a variety of selections. Fiberglass plisse insect screen. Pleated window screen, folding insect mesh Feature: 1.Good chemical stability. Acid and alkali resistance, erosion-resistant cement , and other chemical corrosion resistant . 2.High strength, high modul us , light weight. 3.Good size stability, stiffness, smooth surface, not easy to shrink, good location. 4.Good toughness. Anti impact performance is better. 5.Mildew, and pest control. 6.Fire prevention, heat preservation, sound proof, insulation. Advantage : Low cost and easy to use Improves fluidity and metal distribution Removes micron sized inclusions and impurities Can be used with existing pattern equipment Eliminates inclusions created by ceramic chips Fiberglass window screen / fiberglass window screen mesh / fiberglass insect screen mesh Application: 1) textile printing and dyeing 2) printing drying conduction band 3) dryer, non-woven dryers, high frequency dryer 4) food baking machine conduction band 5) temperature control chamber 6) flux type rapid drying of ink drying and general moisture content items Price Price condition : fobprice : usd.2 / sqm Packaging & delivery Packing :opp bag then plastic woven bag or cartonsdelivery lead time : 10-15 days after received advanced paymentminimum order : 5000 sqmsupply ability : 70000 sqm per day. -
Quick Information Place of Origin: China Description We can produce special size fiberglass mesh according to your requirements,like different mesh size and weight per square meter.fiberglass mesh tape High quality of our products: Fiberglass Mesh Coated Acrylic Resin (1)Coating glue: our coating glue is produced by South Korea LG Chemical Company which belongs to LG Group; (2)Our fiberglass yarn is more 20% strong strength and beauty surface than normal fiberglass yarn. (3)Certificates to guarantee quality: Passed in ISO9001 certificate, IQ net and China National test. FIBERGLASS MESH: Specification Material of the base:Fiberglass yarn Type of weave (name):Leno Hole Size:2.8x2.8mm,4x4mm,5x5mm,10x10mm Colored fibers woven:White,Green,Blue,Orange,and any color Coating:Latex Coating, Urea Coating Length of the roll:30m,50m,100m. Height of the roll:0.2m,0.5m,1m,1.2m,1.5m,1.8m, Weighting:45g,80g,100g,110g,120g,150g,160g and so on. Usage: 1.75g / m2 or less: Used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure. 2.110g / m2 or about: Widely used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break . 3.145g/m2 or about: Used in the wall and be mixed in various materials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS ). 4.160g / m2 or about: Used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature Price Price Condition : FOBPrice : USD.2 / sqm Packaging & Delivery Packing :opp bag then plastic woven bag or cartons.Delivery Lead Time : 10-15 days after received advanced payment Minimum Order : 5000 sqmSupply Ability : 70000 sqm per day. -
Quick information Place of origin: china18*16 120g 34%fiberg : 70000 sqm per day Description Fiberglass screen is weaved by single pvc coated fiberglass, after the heat treatment, the mesh is clear and stable, and has good capacity in ventilation and transparency. It has the capacity of weathering-resistant, burring-resistant, high intensity, no pollution, etc. It is popular used in window and garden to protect against the mosquito and other insects. Fiberglass window screen with pvc coated Fiberglass window screen/mosquito screen / fly mesh Fiberglass window screen Fiberglass netting for mosquito Fiberglass wind Fiberglass window netting Fiberglass window screen features: 1) effective insect barrier. 2) easily fixed and removed, sun-shade, uv proof. 3) easy clean, no smell, good for health. 4) the mesh is uniform, no bright lines in the whole roll. 5) touch soft, no crease after folding. 6) fire resistant, good tensile strength, long life. Specification Mesh size: 18x16/inch, 17x15/inch, 17x14/inch, 17x13/inch, 17/20x20/inch, Weave: plain or leno Width: 50mm, 100mm, 150mm, 200mm, 300mmetc. Length of roll: 20m, 45m, 90m, 300m or as per customers' requirement Colors: gray, black, white, yellow, blue, green, etc Main size: 100cm x 30m, 130cm x 30m, 150cm x 30m Private label Delivery time 15-20days after received deposit. Uses Insect wire netting products are widely used in doors and windows of various buildings against mosquitoes, insects and also for separation Packaging Plastic bag packing, 2 / 4 / 6 / 8 rolls in one carton box, then tray( optional) Price Price condition : fobprice : usd.3 / sqm Packaging & delivery Minimum order : 5000 sqm -
Quick information Place of origin: china Description Spray-up fiberglass roving 1.Spray-up processing 2.Coated silicon alkyl binder Spray-up fiberglass roving 1. Usage and feature Assembled roving for spray-up is used for fiberglass spray-up processing. It is coated silicon alkyl binder, soluble in unsaturation polyester and vinyl resin, especially be suitable for la rge size product, easy removing air bubble, completing wet-out, good moldability and no springback. It is mainly used in manufacturing fiberglass boat hulls, sanitary fittings, storage tank, pipe, automotive parts and cooling towel etc. Feature Especially be suitable for spray-up vert ical; Good moldability and no springback; Easy for removing air bubble; Excellent cutting function. 2.Technical parameters IdentificationDensity(%)Moisture content(%)Combustible content(%)Stiffness(mm)Net weight(kg) Er13-24002400Less0.151.15,0.15130,2018,0.5 Er13-31003100Less0.151.15,0.15130,2018,0.5 Er13-48004800Less0.151.15,0.15130,2018,0.5 Price Price condition : fobprice : usd.2 / sqm Packaging & delivery Packing :opp bag then plastic woven bag or cartondelivery lead time : 10-15 days after received advanced payment minimum order : 5000 sqmsupply ability : 70000 sqm per day -
Sterilization Retort for Lab Experiment/Sterilization Retort/Sterilizing/Autoclave Sterilizer(GF-Pilot) Applications: 1.Metal containers: Maguchi Tetsu, aluminum can; 2.Soft packaging products: aluminum foil bag, high temperature cooking bag; 3.Plastic containers: PP bottles, HDPE bottles. Features: The pilot sterilizers are the best option for clients with relatively small output, laboratories and food producers in need of new product development. 1.The sterile equipment are extraordinary in formulating scheduled process of new products, simulating sterilization environment in real production; 2.Measuring F0 value for mass production, reducing loss of finished products in experiment and improving rate of finished products; 3.Two kinds of heating methods: steam heating and electrical heating; 4.Sterilization way: Water spray, water immersion, steam; 5.Static and Rotary sterilization for your choice.
SL200K series, developed by USA KINO in terms of its long-term experience, are standard drop shape analysis based interface chemical analytical instruments. Their modularized design makes tens of thousands of possible different combinations available, which is undoubtedly your above-all choice for the high precision and accuracy in interface chemical analysis. The integrated instrument consists of sophisticated optical mechanism, optical vision system, high-precision dosing system as well as CAST 3.0-USA KINOs professional interface chemical analytical software. SL200K series are applicable to measure static / dynamic contact angle, surface free energy of solid and its distribution (dispersive force, polar force and hydrogen bond force, etc.), interface tension of liquid-gas / liquid-liquid as well as interface viscidity & elasticity of liquids (oscillating and expanding drop), etc. We provide clients cost-effective instruments with best performance - the most professional contact angle meters & interfacial tensiometers and technical assurance in R&D and quality control.
PTFE (Teflon) Coated Fiberglass/Glass Cloth - Standard Grade, ,PTFE Coated Fiberglass Fabrics
