Fiber Glass For Oven

Five Stations Glass Bending Furnace One Heating Chamber, Two Closed Top Annealing Stations & Two Loading / Unloading Stations Two Wagons Moving Among 5 Stations Metal Structure with High Temperature Resistant Paint Closed Top Cover Heat Insulated with Thick Thermal Preservation Materials One Glass is Being Bent While Another Glass is Being Annealed & Cooled Middle Heating Station Fully Utilized All the Time Minimizing Downtime Minimum Heat Loss with Lowest Possible Energy Consumption Heating Elements Installed on Top of Heating Chamber Each Heating Resistor is Individually Control by Corresponding Switch on Control Panel Thermocouples Measure Real Time Temperatures z

Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.

Main purpose: GX-P series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purposes, interior decorations, furniture appliances, instrumentation, lamp, etc. Main technical Features: Glass sheet size: Max size 3500 x 12000(mm).Min size 60 X 60(mm): High quality and product: Up to GB9963, GB9656, ECER43, ANSIZ97.1 standards: Broad applicability: Float glass, coated glass, rolled patterned glass; Advanced heating methods: Radiation/convection matrix heating optional with intelligent heating control system: Lower energy wasting: Continue produce and tempering, reduce energy wastering; Easy operation: User-friendly interface, whole produce with auto-control; Full date storage: Computer-stored glass-type parameter recipes for full range of glass types. Suit for sea transportation

Epgc201/202/203/204/306/308 epoxy glass fiber sheet The product adopts 7628 glass fiber cloth impregnated with epoxy resin by hot pressing. It has high mechanical and electrical properties, good heat resistance and humidity resistance. Products are widely used on mechanical, electronic and electrical equipment as components of insulation parts. The product have higher mechanical properties, electrical properties and high thermal mechanical strength. Iec Characteristic Epgc201 High mechanical and electrical properties, good heat resistance, moisture resistance. Epgc202 Fr4 Performance is similar to epgc201; the flame retardance level is improved to ul f-v0. Epgc203 G10 Performance is similar to epgc201 and it has advanced heat resistance, high mechanical strength at high temperature, excellent electrical and anti-static properties. Epgc204 Fr5 Performance is similar to epgc203; the flame retardance level is improved to ul f-v0. Epgc306 G11 Performance is similar to epgc203 and its proof tracking index is improved. Epgc308 Performance is similar to epgc203 and its heat resistance is improved. It has well mechanical stability at high temperature.

We are offering fiber glass epoxy sheets. These sheets are made of electrical alkali-free glass cloth impregnated with epoxy resin by processing under pressure and heat. Our fibre glass epoxy sheets have high mechanical properties at medium humidity and good dielectric stability at high humidity. They are applied to the mechanical lines, electron lines and electrical appliance lines.

SUNBOW has a glass fiber tube SB-SGS-40 series, which is very suitable for high-voltage insulation of drive motors of new energy vehicles. The test was conducted at the Mercedes-Benz headquarters. After 30 days of continuous operation of the fiberglass tube on the lead of the drive motor, the fiberglass tube did not crack. Among domestic brands, only SUNBOW did it and eliminated all competitors. Among the insulating sleeves for new energy vehicle applications, most manufacturers are currently competing in the project of driving motors, but SUNBOW has developed the SB-SGS-40 series first, and its advantage is that SUNBOW insists on using it. Alkali-free and sodium-free glass fiber yarn and a certain brand of silica gel imported from Germany. After the tube is formed by the special weaving process of SUNBOW, the glass fiber tube yarn is tight and moderate, and the surface is smooth, which lays the foundation for the subsequent coating process. The toughness of German silicone raw materials is more than twice that of domestic silicone. With the help of a proprietary formula, the coated glass fiber tube has a brighter color, and its wear resistance and tear resistance are more than twice higher than those of the same industry. The temperature resistance reaches 260 degrees, and the temperature resistance of domestic counterparts is 200 degrees. The SB-SGS-40 series are mostly used in new energy vehicles. Therefore, there are not many domestic manufacturers with its production capacity. Many customers who find SUNBOW value whether the manufacturer has large-volume production capacity. SUNBOW has two factories in Shenzhen and Dongguan, with an output of 8.4 million meters per month. This is in a far leading position among domestic counterparts. At the Berlin exhibition in Germany in May 2019, the technical director of Mercedes-Benz headquarters directly tested the wear resistance and tear resistance of the SUNBOW fiberglass tube on the spot and found that the SUNBOW fiberglass tube exceeded many domestic and foreign manufacturers. At this time, the customer has already seen the capabilities and strengths of SUNBOW, and used SUNBOW fiberglass tubes in a recent new energy vehicle drive motor project.

Epoxy Glass Fiber Winding Tube 360 EPCF52 Description: This product adopts fiber glass yarn that is impregnated with insulation jelly made of epoxy resin and other resins by certain proportion, and then it is rolled in wet method, and dried and finally consolidated by baking. Its heat resistance level is up to Class H, and it also has excellent electrical and mechanical properties, chemical resistance (SF6), low dielectrical loss, no deformation or delamination. It can be used as main insulator on H grade dry-type transformer, load tap changer, electricâ??reactor, lightning arrestor, SF6 inductor, etc. Technical Data Standardï¼?GB/T 5132.1-2009 IEC61212-1:2006 No. Properties Unit Value 360/EPCF52 1 Density g/m1.85-2.00 2 Vertical Bending Strength (normal) MPa 400 3 Axial Compressive Strength MPa â?¥150 4 Parallel Breakdown Voltage (90 â?? of transformer oil) Kv â?¥40 5 Vertical Electrical Strength (90 â?? of transformer oil) 1mm Kv/mm â?¥11.6 6 Surface Voltage Resistance after Wetting kv â?¥12 7 Insulating Electrical Resistance after Wetting Ω â?¥1.0*10^9 8 Dielectric Loss Factor (50Hz) - â?¤0.05 9 Water Absorption ï¼? â?¤1 10 Partial Discharge PC â?¤5 11 Temperature Index - 180

Model HW-200/HW-400 Power supply 3 AAA batteries Definition 0.5um(International standard:2um) Weight 0.6kg Adapter interface 2.5mm,1.25mm