Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on. 1. Standard: IEC61109 2. Material: E glass and epoxy resin. 3. Process: Continuous pultrusion. Process: 1 - Continuous roll of reinforced fibers/woven fiber mat 2 - Tension roller 3 - Resin Impregnator 4 - Resin soaked fiber 5 - Die and heat source 6 - Pull mechanism 7 - Finished hardened fiber reinforced polymer Specifications: 1.Color: light green or brown. 2.Length: according to Customer requirement. 3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on. 1. Standard: IEC61109 2. Material: E glass and epoxy resin. 3. Process: Continuous pultrusion. Process: 1 - Continuous roll of reinforced fibers/woven fiber mat 2 - Tension roller 3 - Resin Impregnator 4 - Resin soaked fiber 5 - Die and heat source 6 - Pull mechanism 7 - Finished hardened fiber reinforced polymer Specifications: 1.Color: light green or brown. 2.Length: according to Customer requirement. 3. We offer customized products,including the new size, New surface treatment, Jointing the fitting, screw or mechanical.
Insulating Solid Rod is made of ECR glass reinforced epoxy resin.We use continuous pultrusion procss .The products fullfill The standard of IEC61109.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick and so on. 1. Standard: IEC61109 2. Material: E glass and epoxy resin. 3. Process: Continuous pultrusion.
The elescoping hot sticks have maximum convenience for the lineman because they permit him to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks. The sticks is as short as can easy carried on most trouble trucks.The spring-loaded plastic buttons that keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons pop into place, allowing working to be done with complete control and confidence. 1.Applied Standard:IEC60855,ASTM F711. 2.Parts Material: Universal head with hook: aluminum alloy in nature color Tube : Top section: foam filled fiberglass tube in yellow,Other sections: fiberglass tube in yellow Handle: Insulation rubber in black Bag: water-proof Nylon bag.
High Strength Epoxy Resin Fiberglass Cross Knitting+ Pultrusion Insulation Tube was widely used for the live line tools and other insulation parts which need the better electrical performance and light weight. 1. Standard: GB13398-2008 , IEC 60855. 2. Material: Fiber glass and epoxy resin. Filled by close cell foam. 3. Process:Continuous knittingfiberglass + pultrusion.process.
Low dielectric loss glass fiber Low dielectric names D glass fiber, have D3, Dk series. It is low density, low dielectric constant and low dielectric loss. It is an ideal reinforcement for making light weight and high performance radomes with high wave permeability and wide frequency band and print circuit board etc... Specifications D glass fiber Items,D3,Dk Density g/cm3,2.30,2.30 Strength of virgin filament Mpa,2600,2600 Elastic modulus GPa,55,55 Dielectric constant 2210,10HZ,4.5,5.0 Dielectric loss 2210,10HZ,0.0035,0.0035 D glass fiber fabric Specification,D3,Dk Thickness mm,0.22,0.22 Weight g/m2,210,210 Breaking strength N/100*25,Warp,1350,1450 ,Weft fill,1000,1050
Zhejiang Yingtai Insulation Material Co., Ltd. is a manufacturer mainly producing epoxy glass fiber winding pipes. It has a complete set of manufacturing process line equipment and machinery. Our products are all customized products. Various specifications can be customized according to customer requirements. Various types of epoxy glass fiber wound pipe.    Epoxy glass fiber winding pipe is made by uninterrupted fiber wet winding. It is specially developed for high-voltage electrical equipment structural components such as reactors, arresters, fuses, transformers, on-load tap-changers, and transformers. The product performance parameters meet IEC standards Requirements, the product is leading in China. Basic parameters: 1: winding angle, 45 65 (the winding angle can be adjusted according to different requirements to achieve better mechanical performance requirements); 2: fiber content (weight ratio), 70 to 75%; 3: density, 2.00 g / cm3; 4: water absorption, less than 0.03%; 5: Axial thermal expansion coefficient, 1.8 E-05 1 / K; 6: Glass transition temperature, 110 120 ; 7: Chemical resistance Mineral oil: Excellent; 8: solvent and dilute acid: excellent; 9: tensile elastic modulus, 14000 MPa in the axial direction; 10: tensile strength; axial 280 MPa; hoop 600 MPa; 11: Shear strength: 150 MPa; 12: Bending strength: 350 MPa in the axial direction; 13: Compressive strength: 240 MPa in the axial direction; 14: relative dielectric constant 2-3.2; 15: Dielectric loss factor 0.003-0.015; 16: partial discharge â?¤5; 17: Insulation strength: 3 to 6 kV in the axial direction; 10 to 12 kV in the radial direction; 18: Lightning shock: 110 KV 19: Power frequency shock: 50 KV; 20: Heat-resistant grade: B, F, H 21: inner diameter> 5mm; outer diameter
FRP Fiberglass Grating Advantages: * Excellent Corrosion Resistance * 65% Lighter than Steel * Impact Resistant, high strength * Non-Conductive * Long maintenance-free life * Light and Easy to Fabricate * Transparent to Radio Waves and EMI/RF Transmissions
CYC FIBERGLASS ROVING FOR FRP FILAMENT WINDING CYC Fiberglass Roving for FRP Filament Winding is finished with high performance sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resins. It is designed for filament winding process specially and provide fast wet-out in multiple resins with excellent mechanical properties. The typical end-finished products are including FRP water pipes, high pressure oil pipes, chemical corrosion resistant pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and other insulation industries. Glass Type: E-CR Glass Roving Type: Singe-end Roving, Direct Roving, Multi-ends Roving, Assembled Roving PRODUCT FEATURES Good strand integrity and even tension Fast wet-out in resin with low resin consumption Inner side unwinding smoothly & low fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (�¼m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150DF 13~24 600, 1200, 2400 4800, 9600 0.40 0.20 0.55±0.15 UP VE ECY280DF 13~17 1200, 2400, 4800 0.40 0.20 0.55±0.15 UP EP
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
fiberglass needle mat is a good thermal and voice insulation material A.Density toralence +15%-10% B. Heat Resisting 700C degree.Softening temperature: 850 C C.High tensile strength: 350kg/mm ,Modules of elasticity:7300kg/mm ,Elongation at 25 C:4.8%,Flexible: conforms to irregular surfaced D.Corrosion Properties:does not absorb water,rot,mildew,deteriorate or decay. E. Application:Applications Muffler and exhaust insulation ,Automotive catalytic converter, flooring and front dash insulation ,Removable pads,Ship turbines ,Marine, industrial, and process piping ,Power generating equipment,Industrial furnaces and ovens ,Filtration ,Gaskets for air conditioning
The fiberglass window screen is produced with the fiberglass yarn through coating processing and then woven by a method of the plain weave in the production line. The finished screen features good performance for air ventilation and solar shade. As well, it possesses many advantages in terms of anti-corrosion and heat insulation, being easy to clean without deformation, long service life as well as fine and smooth feeling in the hand. It has been widely used in various facilities in ventilation, insects, mosquitoes and flies control.
FRP molding multiple links is the connector of FRP handrail and fences, which is widely used in public facilities. Its regular size is diameter 50mm, and the other size can be made by order.
FRP profiles is made of fiberglass and resin with pultrusion process. It has the character with light weight, alkali resistant, high strength. And it can provide many shape and sizes with various colors. It is widely used in public facilities.
FRP molded grating is made of fiberglass and resin by the molding process. It is used in chemical plant, sewage system etc. Its mesh size and panel size is regular and the color is variable.
Dear friend Have a good day. This is Jack from China and we are the professional manufacturer of Fiberglass Mosquito Screen. Pls kindly check more details as following Weight: 80-120gsm Mesh:18x16 mesh, 18x14 mesh, 16x16 mesh, 16x14 mesh, 14x14 mesh and so on Color: Black,gray,green or as your requirement Package: per roll with plastic bag,6 rolls with one carton or as your requirement. Quantity:20' Container Could load 80000 Square Meters And we would like to send you samples to test the quality. Could you contact me and talk much more details? Look forward to hear from you soon. Jack (Sales Manager) Tel: +86 13102881321 Whatsapp: +86 13102881321 / Wechat: a799033225 Email: sales15@wiremeshofchina.com
There are many types and specifications of fiberglass net. Generally the mass from 60 g/sq m up to 500 g/sq m; and the meshes from 20 x 20 to 1 x 1; As to the weave, it might be leno or plain. Application (1), In construction industry for wall finishing reinforcement. There are different specification adopted, such as 70-5x5, 80-5x5, 100-5x5, 130-5x5, 150-5x5, etc.. (2), In construction industry for reinforcing water proofing products, such as water proofing membrane, water proofing roof. (3), In construction industry for reinforcing cement floor. (4), In stone industry for reinforcing marble slabs, etc.. There are many different specification, which might be made according to customers demand. (5), In stone industry for reinforcing mosaic. The specification and structure might be made at special demand for being suitable. (6), In grinding wheel industry for reinforcing grinding wheel, cutting wheel, dish wheel, etc.. There are many different specification and different types made according to order. (7), In many other fields as reinforcement for lots of application. The main models of fiberglass net are as follows: 70-20x10 70-6x5 80- 6x5 100 - 5x5 130- 5x5 145- 5x5 160 - 5x5 As to the width and roll length, it might be according to order.
Fiberglass drywall joint tape is usually used for Construction and declaration application as joints for decoration or repairing wall crack, etc. Usual Spec: 70g-9x9 50mmx20m 70g-9x9 50mmx45m 70g-9x9 50mmx90m Also can offer 60g-9x9, 150m roll etc.
(1) Silicone Fiberglass Sleeve These sleevings are widely used as a wiring insulator for H-grade electrical machinery, electrical appliances, electric apparatus, and also for the protection of collected strands of wire. (2) Silicone Rubber Fiberglass Sleeve This sleeving possesses good qualities of dielectric, high temperature resistance, excellent elasticity. It can be used for wiring insulation and mechanical protection for electrical machinery and electrical appliances. We offer many kinds of fiberglass silicone sleeve with good quality.
FRP grating with various sizes