Zhejiang Yingtai Insulation Material Co., Ltd. is a manufacturer mainly producing epoxy glass fiber winding pipes. It has a complete set of manufacturing process line equipment and machinery. Our products are all customized products. Various specifications can be customized according to customer requirements. Various types of epoxy glass fiber wound pipe.
   Epoxy glass fiber winding pipe is made by uninterrupted fiber wet winding. It is specially developed for high-voltage electrical equipment structural components such as reactors, arresters, fuses, transformers, on-load tap-changers, and transformers. The product performance parameters meet IEC standards Requirements, the product is leading in China.
Basic parameters:
1: winding angle, 45 65 (the winding angle can be adjusted according to different requirements to achieve better mechanical performance requirements);
2: fiber content (weight ratio), 70 to 75%;
3: density, 2.00 g / cm3;
4: water absorption, less than 0.03%;
5: Axial thermal expansion coefficient, 1.8 E-05 1 / K;
6: Glass transition temperature, 110 120 ;
7: Chemical resistance Mineral oil: Excellent;
8: solvent and dilute acid: excellent;
9: tensile elastic modulus, 14000 MPa in the axial direction;
10: tensile strength; axial 280 MPa; hoop 600 MPa;
11: Shear strength: 150 MPa;
12: Bending strength: 350 MPa in the axial direction;
13: Compressive strength: 240 MPa in the axial direction;
14: relative dielectric constant 2-3.2;
15: Dielectric loss factor 0.003-0.015;
16: partial discharge â?¤5;
17: Insulation strength: 3 to 6 kV in the axial direction; 10 to 12 kV in the radial direction;
18: Lightning shock: 110 KV
19: Power frequency shock: 50 KV;
20: Heat-resistant grade: B, F, H
21: inner diameter> 5mm; outer diameter
FR4 G10 epoxy fiberglass tube is made of alkali-free glass fabric and binded with epoxy resin, in heat rolling and tightening, baking and curing, with high mechanical property and stable electrical property in high humidity, suitable for being used as insulation structural parts of mechanical, electrical and electronic equipment.
Introduction: Basic Materials: Epoxy resin, curing agent and alkali-free glass cloth Specifications: Performance: Good dielectric properties and machinability Temperature Classification: Heat resistance is different according tot he raw material (B/F/H)GB/T 5132.1-2009 IEC61212-1:2006 Application: It can be used as insulation structural components for electrical equipment. Can be made into a dry-type transformer coil insulation tube and transformer insulation end.
Supplier: Glass tube, epoxy fiberglass tube, glass fiber wound tube, fr4 tube, winding tube, cross winding tube, fiber reinforced winding tube, epoxy tube
Services: Glass tube,epoxy fiberglass tube,glass fiber wound tube,fr4 tube,winding tube,cross winding tube
,fiber reinforced winding tube,epoxy tube
We are offering frp epoxy tube. Fiberglass tubes are manufactured to be corrosion resistant, non-conductive, non-magnetic, among other features. They can also be made to be fire retardant.
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc.
Huahao frp round solid rods are widely used as pcb equipment drive shafts .Pcb equipment fiberglass rod has many advantages : good corrosion resistance , lightweight and high strength , heat insulation and non-poisonous , smooth and good looking surface, small friction resistance high transport capacity , easy installation , long service life . This product is suitable for pcb equipment and cleaning equipment. Colors: our regular colors include black , gray , red , orange , yellow , white , green , and blue . And we can offer any color you request . Customized colors are accepted . Welcome to visit our website . Dimension: 2mm to 100mm .
Epoxy resin fiberglass filament wound tubes are made of non-stop fiber wet winding. It is specially developed for high-voltage electrical equipment structural parts such as reactor, lightning arrester, fuse, transformer, on load tap changer, transformer,etc. The product performance parameters meet the requirements of IEC standards,the product is leading in China. Standard color: Green Feature: Dielectric Properties Size: length 1000mm, different ID and OD
Supplier: Metal oxide arrester, organic composite insulator, epoxy fiberglass tube, metal oxide varistor, fuse link
Raw Materials: Fiberglass Solid Epoxy resin Diameter: 12mm, 16mm, 18mm, 20mm, 26mm , 30mm, 36mm, 40mm, 45mm, 60mm, 80mm, 110mm . Length: as per the customer's request Application: For Electric Industry
