Spare parts of crane: Motor, Rope Guide, Wire Rope, Busbar, Remote Control, Limiter, Wheel setï¼?Grab Bucket, Electromagnetic Chuck, Transfer car and other relative accessories.
It is a light and small lifting equipment. It consists of motor, transmission mechanism and sprocket. All electric chain hoists are produced in accordance with international standards. All internal gears are hardened at high temperature, which increases the wear resistance and toughness of the gear. It has advanced performance structure, small size, light weight, reliable performance and convenient operation. It can also be installed on suspended I-beams, curved rails, swing arm suspension guide rails and fixed lifting points.
Refer to European FEM standards, compact appearance, reasonable structure, safe and efficient operation, meet the requirements of contemporary low noise, energy saving and environmental protection. This series of electric hoist uses running frequency control design, low impact. Equipped with an intelligent safe operation monitoring recorder similar to the aircraft "black box", it can continuously record crane working status information and prevent cranes Illegal operation. The overall use of maintenance-free design, fewer wearing parts, convenient maintenance, the overall technical level has reached the advanced level of similar products.
The motor and electrical appliances are explosion-proof type, when the explosion-proof level is Exdâ?¡CT4, sparkproof treatment will be done for the travelling mechanism. The whole machine complies with JB / T10222-2001, and the explosion-proof grades are Exdâ?¡BT4 and Exdâ?¡CT4. This machine can be used with the fixed suspension track of the workshop, and can also be used with explosion-proof electric suspension single beam, explosion-proof electric single beam, and explosion-proof hoist double beam. Its lifting weight is 1t-32t. The working environment temperature is -20 ~ 40 . In addition to the above gas explosion-proof, there are dust explosion-proof, coal safety explosion-proof, so it is suitable for different explosion-proof places.
Rail type container cranes are specialized machinery for loading, unloading, handling and stacking operations in container freight yards, mainly applicable to ports, wharfs, railway freight yards, warehouses, and yards. The rail container gantry crane has a large span and more stacking layers, which can make full use of the site area. Rail-type container gantry cranes have strong positioning capabilities and are relatively easy to implement fully automated loading and unloading. They are an ideal machine for automated container yards. Compared with tire-type gantry cranes, they have a simple structure, good stability, easy operation and safety, and it is easy to realize single machine automatic control. Rail-type container gantry cranes can "stack 4 through 5" or "stack 5 through 6" between two rails and outreach distances, stacking 8 to 15 rows of containers. When moving on the track, the action is accurate and there are few accidents.
The motor and electrical appliances are explosion-proof type, when the explosion-proof level is Exd II CT4, sparkproof treatment will be done for the travelling mechanism. The whole machine complies with JB / T10222-2001, and the explosion-proof grades are Exd II BT4 and Exd II CT4. This machine can be used with the fixed suspension track of the workshop, and can also be used with explosion-proof electric suspension single beam, explosion-proof electric single beam, and explosion-proof hoist double beam. Its lifting weight is 1t-32t. The working environment temperature is -20 ~ 40 Celsius. In addition to the above gas explosion-proof, there are dust explosion-proof, coal safety explosion-proof, so it is suitable for different explosion-proof places.
Single Girder Overhead Crane Electric Overhead Travelling (EOT) cranes are designed and tailor made to suit any condition and site of application. The cranes are designed and manufactured strictly in accordance to National Standard considering adequate factor of safety and complying with appropriate duty of classifications. The capacity for the crane according to requirement can range from 500 Kg to 20000 Kg and the crane span spread from 7.5 Meter to 28.5 Meter. Any other requirement beyond this range can be discussed and designed to suit.
Under Slung Crane Dotrum Underslung Cranes (also referred to as Underhung or Under-running cranes) are suitable for factories, aerospace or warehouses as they do not obstruct or take up floor space. They can be either Single-Girder or Double-Girder, and are typically more suited for limited space with lighter capacities - typically a maximum of 10 ton. As both ends of the girder are mounted onto the bottom of the end carriages in an 'Up-side' position, this design eliminates the need for vertical columns to support the runway. Due to this, the Underslung Crane can ensure a more spacious floor space. Without a doubt, Dotrum Underslung Cranes are considered an essential method to enhance the maximum usage of the limited space available.
Hoist double-beam bridge crane has the advantages of compact dimensions, low building headroom, light weight, and low wheel pressure. This product is mainly applicable to the transfer, assembly, maintenance and loading or unloading operations of mechanical processing workshops, auxiliary workshops of metallurgical plants, warehouses, stockyards, and power stations. It can also replace ordinary double-beam bridge cranes for production workshops in the light textile industry and the food industry. The work type is light and intermediate, and the working environment temperature is -20-40 ° C. It is prohibited to use in flammable, explosive, and corrosive medium environments. Our company mainly produces hoist double-girder bridge cranes with rated lifting capacity below 63 tons.
Cost-effective and space-saving, Dotrum semi gantry cranes provide an alternative solution for customers whose machineries are required to be positioned along the sides of the factory layout. With one leg moving on the floor rails and the other running on the runway beam, this is a very suitable design for wide factories. The operator will only require 2 operational bays without having the need to incur a high cost to build a continuous runway beam and columns in the centre of the factory. Applicable in all types of industries, Dotrum semi gantry cranes are mainly designed based on the different factory layouts and end user's production flow requirements. As a result, these cranes are available in workshops and yard industries.
It is mainly composed of mast (main beam, support legs, lower cross beam, etc.), lifting mechanism, running mechanism, and electronic control part. It uses an electric hoist as a lifting mechanism, and travels along the main beam bottom flange. The truss has a light weight and strong wind resistance. The whole machine has the characteristics of light weight, simple structure, convenient installation and maintenance, etc. It is suitable for general loading and unloading and lifting work in outdoor places such as factories, mines, freight yards and warehouses within the range of small and medium lifting weights. There are three operating modes: pendant button control, wireless remote control and driver's cab. Power supply can be cable reel and high-altitude sliding wire.
Dotrum Jib Cranes are rational and low-cost handling equipment which do not require any modifications to the building, and are applicable in numerous industries. They are compact, whilst at the same time enabling loads to be moved in every direction. As an ideal companion for overhead cranes, they cover the workshop as a whole, increasing autonomy and efficiency of every workstation.
Quayside container cranes are specialized machinery and equipment for loading, unloading, handling, and stacking operations at container terminals. They are mainly applicable to ports and terminals. The shore container crane has a large span and a long cantilever, which can make full use of the site area and the loading and unloading of super-Panama container ro-ro ships. Shore container cranes have strong positioning capabilities and are relatively easy to realize fully automated loading and unloading. They are an ideal machine for automated container terminals. Dockside container cranes have a simple structure, good stability, convenient operation, safety and reliability, and are less prone to cargo damage or machine damage accidents. When moving on the track, the movement is accurate and there are few accidents.
Electric wire rope hoist can be installed on I-beam, bridge crane, gantry crane, cantilever crane. The speed can be single speed or dual speed. With a few changes, it can also be used for hoisting. It is one of the common lifting equipment used in material handling places such as factories, mines, ports, warehouses, freight yards, etc. It is a necessary machine to improve labor efficiency and improve working conditions.
Shipyard gantry crane is one kind of gantry cranes, which is used to assemble large structures and the installation of electromechanical equipment during shipbuilding. This equipment is usually equipped with two crane trolleys: one with two main hooks, which runs on the track of the flange on the bridge; the other one has a main hook and a secondary hook, which runs on the track of the lower flange of the bridge. Two trolleys run crosswise in order to flip and lift large hull sections.
Lift Pads
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
