PTFE(polytetrafluoroethylene) is the best chemical resistance platic. It has the lowest coefficient of friction of all known solid materials and a wide range of working temperature from -180�� to 260��.
Features:
1. Resistance to chemical corrosion.
2. Resistance to aging.
3. Low friction coefficient.
4. Good dielectric Property.
5. Self-cleaning property.
6. Waterproof.
DM PMMA features
1) Has the perfect color similar to teeth
2) Excellent biocompatibility
3) Made through high temperature high pressure
4) Good wearability
Product description
Polyva YT-8012 is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and has good saponification resistance. and it also has a wide range of usage.
Suggest Applications Suitability
Flexible thin-bed mortars
Tile grouts/joint fillers
Tile adhesive(C1/C1S1/C2)
Skim Coat/ Wall putty(Indoor/outdoor)
Plasters/ Renders
Troweling compounds for Floor/wall
Gypsum based mortars
Powder paint
Self-leveling dry mixed mortars
Highly recommended Recommended Suitable
Properties
Ready-mixed mortars modified with POLYVAE® YT-8012 can improved adhesion, flexural strength in bending,abrasion resistance,deformability.it has good rheology and water retention.can increase the sag resistance of tile adhesives,it can made up to tile adhesives with excellent non-slump properties and putty with good properties.
Special features
POLYVAE®YT-8012 has no effect on rheological preperties and is a low-emissions, general-purpose powder in the medium Tg range. It is eminently suitable for formulating compounds of high ultimate strength.
Application
Typical applications for POLYVAE®YT-8012 : not only for blending with inorganic binders, such as cement, gypsum, plaster and hydrated lime for the manufacture of thin bed mortars, self-leveling mortars, wall troweling compounds, tile adhesive and joint filler, but also as the exclusive binder for synthetic-resin-bound systems.
Storage
POLYVAE YT-8012 should be stored in a cool and dry place and protected against moisture. Since the product is thermoplastic. the storage temperature not over 30 Deg.C. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. If you cant use out one bag on time, youd better seal it again.
Package
In 25kg Paper compound plastic bags.
Packing on request
Additional Information:
Appearance White powder
Stabilizing system Polyvinyl alcohol
Additive agent Mineral Anti-block agent
Product Technical Data
Item Unit Value
Solids content % 98.0-100.0
Ash content (1000) % 10-14
Bulk density g/l 480-590
Average particle size �¼m ~80
PH value 5.0-8.0
MFFT() approx 4
Tg () approx +10
Safety notes
The above date is in accordance with our knowledge,but do not absolve the clients carefully checking it all immediately on receipt.please do more testing before using it
To avoid the difference formulation and different raw materials. and we reserve the right to alter our product and without informing in advance.
ZHUOJUN redispersible polymer powders are produced by spray-drying special water-based emulsion and are mostly based on vinyl acetate-ethylene. They dissolve in water easily and quickly forms emulsion. Their chemical properties are the same as original emulsion completely. They have excellent flexibility in low temperature.
The RDP powders can glue together different substrates, reinforce mortar structure and provide excellent adhesion at cement or gypsum based dry mixed mortar substrate interface.
ZHUOJUN® redispersible polymer powders are free flowing white powders obtained by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are mainly used improve cohesion, adhesion, flexibility and workability in constructions especially in dry-mix mortar.
Typical Applications
- Tile adhesives
- Tile grout
- Wall putty
- External insulation and finish systems (EIFS)
- Cement, lime or gypsum-based finished dry-mix mortar
- Self-leveling flooring compounds
- Repair mortars and crack fillers
- Cement-based plasters
- Gypsum fillers
13934 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of propertiesInherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
Widely applied on different areas of home improvements.Through laminating,vacuum membrane pressing and wrapping.
Our PVC films are environmental-friendly on furniture,kitchen cabinets,windows,doors,wall decals, ceiling and flooring. Customization like natural wood,marble,textile textures can be virtually showed on products.
Usage:
1.PVC film for furniture
2.PVC film for pvc profile
3.PVC film for room door
Material PVC ( polyvinyl chloride )
Color more than 300 kinds pvc foil for you to choose
colo woodgrain, solid color, wood grain, metallic color, we also accept customized
Width 60mm, 1400mm
Thickness 0.12 mm-0.50 mm
Packages sea-worthy or as required with rolls
Payment T/T( 30% prepayment and the balance before shipment )
polyetheretherketone
KetaSpire KT-850 is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases.
These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses.
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Solvay KetaSpire KT-820 NT Natural pellets
Solvay KetaSpire KT-820 NL Natural pellets
Solvay KetaSpire KT-820 BK95 Black pellets
Packing:25kg/carton
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of properties
Inherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
SOLVAY Veradel PES/PESU Series:
Veradel PESU was formerly marketed as Gafone PESU Veradel 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity. PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance. Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.
PES/PESU SOLVAY Veradel 3000P
PES/PESU SOLVAY Veradel 3100P
PES/PESU SOLVAY Veradel 3200P
PES/PESU SOLVAY Veradel 3400P
PES/PESU SOLVAY Veradel 3600P
VeradelPESU (polyethersulfone) combines good chemical resistance with a high heat deflection temperature, making it a good fit for baby bottles and other food service applications. This resin is also inherently flame retardant for use in electronic components and testing devices
AvaSpire PAEK (polyaryletherketone) is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and doubled tensile elongation at break values.
Depending on the grade, AvaSpire PAEK outperforms comparable grades of PEEK.
Higher stiffness from 150 �°C to 190 �°C (302 �°F to 374 �°F)
Improved ductility and toughness
Equal or better chemical resistance
UL-94 V0 rating at 0.8 mm
Comparable strength and stiffness at up to 30% lower cost
Excellent aesthetics and colorability
AvaSpire PAEK is available in
KetaSpire PEEK
KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass
fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.
KetaSpire Product Line
Solvays KetaSpire PEEK product line includes:
Neat grades (lubricated and non-lubricated)
Glass fiber and carbon fiber reinforced grades (low and high melt flow)
Wear resistant SL grades (lubricated and non-lubricated)
Natural-colored powders (coarse, fine, super-fine and ultra-fine)
Packing spec: 25kgs per bag.
Please share us the material model number if you have and color/ order quantity so that we can quote you exactly the material meet your demands.
Ixef PARA (polyarylamide) provides a unique combination of strength and aesthetics, making it ideal for complex parts that require
both overall strength and a smooth, beautiful surface.
Ixef compounds typically contain 50-60% glass fiber reinforcement, giving them remarkable strength and rigidity. What makes them
unique is that even with high glass loadings, the smooth, resin-rich surface delivers a high-gloss, glass-free finish that's ideal
for painting, metallization or producing a naturally reflective shell.
High flow into thin walls
In addition, Ixef PARA is an extremely high-flow resin so it can readily fill walls as thin as 0.5 mm, even with glass loadings as high as 60%.
Excellent Surface Finish
Superb, resin-rich surface provides a highly polished appearance, even with high glass fiber content.
Solvay IXEF 1002 Natural/Black color resins
Packing:25 kgs a bag
Solef PVDF
High-performance semi-crystalline fluoropolymers
Solef PVDF is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride. Without any additives, it has the intrinsic stability inherent to fluoropolymers even when exposed to harsh environments, providing the user with a unique combination of properties resulting in longer equipment life.
In addition to the PVDF homopolymers, which are recognized worldwide for their excellent performance in a variety of applications, Solvay Specialty Polymers has developed a wide range of VF2-HFP copolymers, and VF2-CTFE copolymers to respond to specific needs of the market.
Key Features
Chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc.
Very high purity
Low coefficient of friction
Continuous use within a wide range of temperatures
Unaffection by UV and good resistance to �³ radiation
Excellent intrinsic fire resistance
Available grades approved for food contact applications
Good capability for thermoforming and very easily joined by welding
Performance
Relative Performance of Melt-Processable Fluoropolymers
In addition to Solef PVDF resins, Solvay Specialty Polymers offers a wide range of fluoropolymers which are also easily processable by injection, extrusion and all conventional processing techniques.
Solef PVDF
High-performance semi-crystalline fluoropolymers
Solef PVDF is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride. Without any additives, it has the intrinsic stability inherent to fluoropolymers even when exposed to harsh environments, providing the user with a unique combination of properties resulting in longer equipment life.
In addition to the PVDF homopolymers, which are recognized worldwide for their excellent performance in a variety of applications, Solvay Specialty Polymers has developed a wide range of VF2-HFP copolymers, and VF2-CTFE copolymers to respond to specific needs of the market.
Key Features
Chemical inertness to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc.
Very high purity
Low coefficient of friction
Continuous use within a wide range of temperatures
Unaffection by UV and good resistance to �³ radiation
Excellent intrinsic fire resistance
Available grades approved for food contact applications
Good capability for thermoforming and very easily joined by welding
Solvay Halar 6012 F
Halar ECTFE, a copolymer of ethylene and chlorotrifluoroethylene, is a semi-crystalline melt processable partially fluorinated polymer. It is available in different grades that are specifically designed for electrostatic powder coating.
Halar ECTFE is particularly suitable for use as a coating material in protection and anti-corrosion applications thanks to its unique combination of properties.
Key features
Very good chemical and thermal resistance
Optimum permeation resistance
Outstanding flame resistance
Very good surface characteristics
Surface smoothness
Purity
Markets and Applications
Typical applications served by Halar ECTFE include those in contact with highly corrosive or ultrapure chemicals such as strong inorganic bases and strong mineral and oxidizing acids including:
Vessels
Reactors
Semiconductor chemical storage tanks and ductwork
Piping systems
Centrifuges
Agitators
Exhaust hoods
Filters
Electroplating equipment
The super-softening property of Redispersible Polymer Powder (RDP) can improve the flexibility of cement-based materials while guarantees other work performances. In this study, the influences of different mixing amounts of RDP on the compressive strength, flexural strength, flexural compression ratio and bonding strength of sulphoaluminate cement mortar were investigated. The microscopic morphological structure of RDP-modified sulphoaluminate cement mortar was also observed through SEM to analyse the influence mechanism. Results show that, with the mixing amount of 2.0%, the compressive strength of cement mortar was improved. This mixing amount also increased the 28d flexural strength to 8.21 MPa (5.0% improvement) and 14d bonding strength to 5.6 MPa (27.3% improvement). Addition of more RDP resulted in the increase in flexural compression ratio because the powder particles formed water-insoluble continuous polymer colloidal film in hardened paste. This film generated a network with cement dydration products throughout the paste, consequently promoting the flexibility of cement.
13934 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
