Radel PPSU
High heat, high impact performance
Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI).
The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization.
Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions.
Key Features
High HDT of 207C (405F)
Superior toughness and impact strength
Exceptional long-term hydrolytic stability
Better chemical resistance than PSU and PEI
Withstands over 1,000 cycles of steam sterilization without any significant loss of propertiesInherently flame retardant
Transparent
Colorable
Typical Applications
Sterilization cases and trays
Dental and surgical instruments
Medical devices
Aircraft interiors
Airline catering trolleys
Hot water fittings
Plumbing manifolds
Food service trays
SOLVAY PPSU Radel R-5100 NT Natural color
SOLVAY PPSU Radel R-5100 NT15 Bone color
SOLVAY PPSU Radel R-5100 BK937 Black color
SOLVAY PPSU Radel R-5100 GY1137 Grey color
SOLVAY PPSU Radel R-5100 GY1037 Grey color
SOLVAY PPSU Radel R-5100 GY874 Grey color
SOLVAY PPSU Radel R-5100 RD1018 Red color
SOLVAY PPSU Radel R-5100 YL1337 Yellow color
SOLVAY PPSU Radel R-5100 GN1007 Green color
SOLVAY PPSU Radel R-5100 BU1027 Blue color
SOLVAY PPSU Radel R-5100 VT2582 Violet color
SOLVAY PPSU Radel R-5100 BN1164 Brown color
SOLVAY PPSU Radel R-5100 OR1145 Orange color
Packing spec.: 25kgs/ bag
We can give discount according to order quantity
KetaSpire PEEK KetaSpire PEEK (polyetheretherketone) offers the best combination of fatigue resistance and chemical resistance, which is similar to PPS (polyphenylene sulfide). However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 C (464 F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options. KetaSpire Product Line Solvays KetaSpire PEEK product line includes: Neat grades (lubricated and non-lubricated) Glass fiber and carbon fiber reinforced grades (low and high melt flow) Wear resistant SL grades (lubricated and non-lubricated) Natural-colored powders (coarse, fine, super-fine and ultra-fine) Solvay KetaSpire KT-820 NT Natural pellets Solvay KetaSpire KT-820 NL Natural pellets Solvay KetaSpire KT-820 BK95 Black pellets Packing:25kg/carton We can give discount according to order quantity.
Radel PPSU High heat, high impact performance PPSU SOLVAY RADEL R-5000 NT / CL301 PPSU SOLVAY RADEL R-5100 NT15 / BK937 / GY1137 / GY1037 / GY874 / RD1018 / OR1145 / YL1337 / GN1007 / BU1027 / VT2582 / BN1164 PPSU SOLVAY RADEL R-5500 NT / NT15 / BK937 PPSU SOLVAY RADEL R-5600 NT PPSU SOLVAY RADEL R-5800 NT / CL301 PPSU SOLVAY RADEL R-5900 NT PPSU SOLVAY RADEL R-7110 GY575 PPSU SOLVAY RADEL R-7800 We can give discount according to order quantity.
rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.
Radel PPSU High heat, high impact performance Radel polyphenylsulfone (PPSU) delivers the highest performance of our sulfone polymers, offering better impact resistance and chemical resistance than polysulfone (PSU) and polyetherimide (PEI). The high heat resistance and excellent hydrolytic stability of Radel PPSU make it an excellent choice for hot water fittings and medical devices requiring repeated steam sterilization. Radel R-7000 Series products are specially formulated for use in aircraft interiors and are in compliance with stringent FAA regulations requiring low heat release, low smoke generation and low toxic gas emissions. Key Features High HDT of 207C (405F) Superior toughness and impact strength Exceptional long-term hydrolytic stability Better chemical resistance than PSU and PEI Withstands over 1,000 cycles of steam sterilization without any significant loss of properties Inherently flame retardant Transparent Colorable Typical Applications Sterilization cases and trays Dental and surgical instruments Medical devices Aircraft interiors Airline catering trolleys Hot water fittings Plumbing manifolds Food service trays SOLVAY PPSU Radel R-5500 NT Natural color SOLVAY PPSU Radel R-5500 NT15 Bone color SOLVAY PPSU Radel R-5500 BK937 Black color SOLVAY PPSU Radel R-5500 GY1137 Grey color SOLVAY PPSU Radel R-5500 GY1037 Grey color SOLVAY PPSU Radel R-5500 GY874 Grey color SOLVAY PPSU Radel R-5500 RD1018 Red color SOLVAY PPSU Radel R-5500 YL1337 Yellow color SOLVAY PPSU Radel R-5500 GN1007 Green color SOLVAY PPSU Radel R-5500 BU1027 Blue color SOLVAY PPSU Radel R-5500 VT2582 Violet color SOLVAY PPSU Radel R-5500 BN1164 Brown color SOLVAY PPSU Radel R-5500 OR1145 Orange color Packing spec.: 25kgs/ bag We can give discount according to order quantity.
we have large volume r- MDPE available. for more information my email:
R-PP natural color (P102N). It is available in very large quantities. 23,000,000 VND per ton. 868 euros per ton. Negotiable price depending on the volume ordered and regularity. the price is indicated EXW (factory).
R-PP P108N is Pre-Consumer Recycled Polypropylene , in nature color. It is designed for spunbond nonwovens fabric. Price FOB (hai phong) 28 tons full containers 40Ft. 1003$/tons
R-PP black color available in very large quantities every month. P302B is Recycled Polypropylene Copolymer, in black color. It is designed for injection molding of components, home appliances and industry parts
ABS105B R-ABS black color Pack 25 kg For companies that consume R-ABS. we can guarantee you a large volume with consistent quality. we carry out numerous checks throughout the production chain. I can guarantee you advantageous rates, but also a 6-month fixed price guarantee. you will receive the GRS certificate with your invoicing for all our recycled plastic materials.
