High quality and good surface quality to meet the updating request of pv development and reduce the production cost. Crystal structuremono-crystalline Crystal method cz Conductance typep Dopant b Dimension125*125ía0.4156*156ía0.4 Diameter ª¦150ía0.4 ª¦165ía0.4ª¦200ía0.4 Crystal orientation ía1 Resistivity( ª+.Cm) 1-3/3-6 Lifetime( ª8s) í²15 Carbon concentration( atoms/cm3 )ín5*1016 Oxygen concentration( atoms/cm3 )ín0.95*1018 125*125 and 156*156
Silicone rubber sheet.
Manual mold silicone rubber is mainly applicable to manual mold design, pvc plastic molds, cement products molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, electronic appliance vibration resistance. 25kg/drum
Pfa magma sample tubepfa heat shrink tube Usage: Office-work machine 's roll packing Paper machine's roll packing Printing and dyeing machine's roll packing Printing machine's roll packing Insulated jacket The main insulation of rotor of the electric instrument Water treatment Make the magma sample in the field of oil field ect. Also we can supply the following pfa tubes. No-contractive pfa thin tube, contractive pfa thin tube, pfa heat shrink tube.Pfa transparent tube. 2. Pfa tubing: A. Material: pfa resin B. Produced with thermoplastic extrusion technology C. Good heat-resistance of 260oc and electric insulation property D. Applied in the fields of petrochemical, e/e and it industry.
Description of rtv silicon rubber: Silicine rubber for manual moid is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component a is silicone rubber, and component b is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 418 manual mold silicon is mainly applicable to manual molds and small number of product duplication. 25kg/drum, 200kg/drum
CAS NO: 63148-57-2 Apperance & Property:Colorless transparent liquid Hydrogen Content (%):1.58-1.60 Viscosity (25 C, mm 2/S): 20.00-30.00 Flash Point C: 120 C Volatile Component%: 3.00 Packing & Transportation: 200L per plastic barrel/ iron barrel 1ton IBC stored in a cool,ventilated warehouses.Away from fire and hot sources. Require sealed packing. And the temperature of warehouse should not be more than 30ípC. Prevent from direct sunlight.
Silicon wafers.
Silicon.
Silicon tubing has a good property of waterproof, oil resistance, and hest resistance,etc. 100kg per carton.
NE-5130 NE-5140 NE-5150 NE-5160 NE-5170 NE-5180 Appearance milky-white,light-yellow,light-gray Density g/cm3 1.09í+0.05 1.13í+0.05 1.15í+0.05 1.18í+0.05 1.21í+0.05 1.25í+0.05 Hardness Shore A Points 30í+3 40í+3 50í+3 60í+3 70í+3 80í+3 Tensile Strength MPaí¦ 5.0 6.0 7.0 7.0 6.5 6.0 Elongation at Breakage % í¦ 440 380 320 280 200 150 Tension Set % í_ 8 9 10 10 9 8 Tear Strength kN/m í¦ 15 16 18 18 16 15 First vulcanization condition for test piece: 175íµí-5min Vulcanizator: 80% DMDBH,quantity added 0.65% 20kg/box
Silicone bakeware 1.100% food-grade silicone material 2.Non-stick finish durable and easy-cleaning 3.Welcome customer's design 4.Any color availiable
Multicrystalline silicon wafers 1.Material: multicrystalline silicon 2.Growth method: directional solidification 3.Conductivity type: p-type (boron doped), astm f42 4.Oxygen concentration: n 1, 0x1017 at./cm3, astm f 121 5.Carbon concentration: n 1x1018 at./cm3, astm f 121 * oxygen content measurement by astm 1188 and used calculation coefficient for ppm atomic is 4, 9 and and for at/cm3 is 2, 45e+17. 6.Square side: (156.0 0.5) mm 7.Symmetry as per the drawing in the enclosure no. 1 8.Thickness: (200 30) µm, astm f 533 9.Ttv: < 50 µm, astm f657 10.Bow < 50 µm, astm f 534 11.Surface saw damage depth µm < 20 (< 15 typically) 12.Saw traces µm 2 µs, astm f 28 15.Surface: as-cut and cleaned; visible contamination, oil or grease, finger prints, soap stains, slurry stains, epoxy/water stains, cracks are not allowed; edge chips under 1 mm from the edge of the wafer are allowed. . 16.Customer may request to receive reference samples 17.Wafers are being stacked into batches of 50-100 wafers each. Then it is sealed into polyethylene film. Protective paper among wafers is upon customer request. 500 -600 wafers in total are being packed into styrofoam box. Styrofoam boxes are being packed into pasteboard cases. Wafers are being packed in such a manner as to ensure minimal damage to the product during transportation. 18.All polystyrene boxes of wafers are identified with: box number; type of wafer; number of wafers per box; all contributing ingots numbers; thickness of wafers; date of packing / output inspection. Geometry: Square side angle:900, 5 Chamfer: 1, 5 mm0, 5mm at 452
Rtv-2 room-temperatue sulfureted silicon rubber Silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts, lighting and candle crafts.
Silicone sealant The shundes-280n is a low moudulus silicone sealant which offers outstanding performance accoss a wide variety of glazing and construction application.It has excellent adhesion to glass, brickwork, pleastic and so on. 280ml(25/card)
Ferro silicon 65%.
Silicone oil, silicone emulsion, hydroxy silicone oil, oh polymer.
Fesi(75, 72), fesimg, fesicaba, fesisr, sica, hc femn(75, 72), simn(6517), femo(60%), silicon metal( 553, 441).
Silicon, carbon products, bullet,  proof,  plate, material, ceramic material, refractory material.
Silicon Metal Lump.
Silicone-heater-pads.
