matic paper cone production line doesn't need any manipulation after putting raw material paper into it .The production progress is operated by plc system, the principle machine transmission use cam to distribute time structure. Mechatronics is made up by different service position working principle, double -speed variable frequency control and photo-electric detection approach control, pneumatic time delay control. It makes the labor-saving, energy-saving, high-efficiency, high-quality paper cone production come true. 2*40'container
Length: 1200mm Diameter: 50mm~150mm Paper Wall: 0.5mm~5mm Cutting Way: by air Power: 1.1KW Cutting Units: 8sets Size Of Disc Knife: 110x27x1.5mm. Weight: 0.8 ton Dimension: 2000x800x1200mm.
Tube Diameter: 30mm~300mm Tube Wall Thickness: 0.5mm~12mm Speed: 3-15m/min Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch. Power: Main Machine 5.5kw; Cutting: 0.75kw Control way: Frequency conversion; Multipoints in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel: 320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft: 1pc (with plating chrome) 3"or by order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel, with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides (15layers),1 set glue tank. With heating bonding device for inner aluminum foils. Wegiht:3.2t Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm Tube Wall Thickness: 0.5mm~20mm Speed: 3-15m/min Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch Power: Main Machine 15kw; Cutting: 0.75kw Control way: Frequency conversion. Multi-points in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel:320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft:1pc (with plating chrome) 76mm or by the buyers order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel,with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides,1 set glue tank. Weight: 3.2t Dimension: main machine 3200x2000x1800mm.
1, Paper roll width : 1400mm 2, Sheet accuracy : 0.3 mm 3, Optional equip with Germany Synchronization controller, accuracy : 0.2mm 4, Max. cutting speed : 300 m/min 5, Max. rotation speed : 400 r/min 6, Sheeting length : 300 ~ 1550 mm 7, Sheeting thickness : 180 ~ 400 gsm. Sheet pilling height : 1400mm Weight : 12ton.
Introduction: The tester is applying to test the thickness of flat sheet specimens. It measures up to the standard of paper and cardboard thickness testing method---iso534, iso438, gb/t451.3 and gb/t1938. Technical characters: 1, measure range: 0-18mm 2, accuracy: 0.001mm 3, measuring area: 200mmª 4, pressure: 100 kpa, 5, value error: ª2.5um or ª0.5% 6, dimension: 80+120+120 (mm) 7, weight: 2.5kg Plywood carton
Introduction: The tester is designed according to iso 1974(paper--tearing strength test method), gb455.1, it is mainly used for paper tearing strength test as well as cardboard low-tearing strength test. It can test automatically, lcd displays data. The tester is incorporated with mechanize and electrization. Its micro-control system adapts to the high precision photoelectric axial coder and micro-control digital circuit which make the man-machine conversation come true. The advantages: advanced technology, complete functions, steady capability, simple operation, etc. Technical parameter: 1. Range: 10mn~1000mn 2. Tearing arm: 104fa1 (mm) 3. Beginning angle for tearing: 27.5ffa0.5f 4. Beginning cutting length of specimen: 20fa0.5 (mm) 5. Dimension: 450 (l)f¯310 (w)f¯465 (h) (mm) 6. Weight: about 15kg Plywood carton
Introduction: The meter is widely applied in papermaking, fabric, printing, plastic, ceramic and porcelain enamel, construction material, chemical industry, salt making and other testing department. It is used to test the whiteness, yellowness, color and chromatism of specimen·+as well as transparency, opacity, light scattering coefficient and light absorption coefficient of paper. Plywood carton
Packaging ream width: Gross(310mm)Net(297mm) Each packet: 5bags/carton&10 packets/catron Carton dimensions: 803*529(mm)/803*739(mm) 472*385(mm)/472*595(mm) Paper grade High-grade coated Design speed Max 5-10carton/min Production speed: Max5cases/min Power 18kw Compressor consumptions 300NL/min
Application: GNP series gravity disc thickener is mainly used in pulp-washing and thickening section of pulping and paper making industry.It is used for removal of filler and ash in pulp,for washing and thickening of pulp.It is suitable for the subsequent refining equipment and for pre-wire stock regulating system. Features: 1.Gravity disc thickener has large dewatering area,high output,small power allocation and power consumption. 2.Gravity dewatering from level difference betwwen insid and outside need no vacuum water legs.The mounting height is not require,so it will save space. 3.It use stainless steel mesh,There is no pollution.It is easy to clean and has long life. 4.It adapts to wide range of pulp,such as wster paper pulp,chemical pulp,chemi-mechanical pulp. 5.It adapts to wide range of pulp consistency from 0.8%to2.5%It uses frequency control.It can be easily adjusted.
Applicantion: Used for various waste paper pulp of coarse screening. Design Feature: Based on the fluid dynamic development of new high effeciency and energy saving up circulation the son,and high performance big let flow processing capacity sieve drum.Save 30-60percent of the power consumption,improve the effiency of screening. Special design of the high flow structure,higher production ability; Liters flow design and prolong the service life of the consumables.
The paper machine is used to improve the production efficiency of the equipment, widely used in the printing industry, office for the occasion. The paper machine is more accurate than the traditional weighing method and the thickness measurement counting method, and the changes in the weight and thickness of the material do not have any effect on the accuracy of the paper machine. According to several paper machine USES can be divided into: single head count paper machine, double head count paper machine, AT several paper machine. According to the working principle of a number of paper machines can be divided into: the number of paper machines, the photoelectric number machine According to the paper type can be divided into: thin paper counting paper machine and thick paper counting machine Technical parameters Count paper speed: 0-2200 sheets/min Suitable for paper range: 22-255g/m2 Paper size: minimum 100 x 100mm maximum: 546 x 788mm Zebra: 6mm (wide) x 100m (long) (not including 3m terminal strip length) The main performance Accurate and high-speed counting of any material and any thickness of paper can be carried out A number of paper machines can be used for precise and high-speed counting of various quality paper, including printing paper, copy paper and coating paper. Convenient touch screen operation: In addition to the auto-start function, a number of paper machines can also start counting paper when the start button on the operating table is pressed. The count of paper stops automatically when the last piece of paper is counted. A variety of functions to meet the wide range of paper needs: The function of the number of paper machine is equipped with convenient to meet the user's different applications, in addition to the standard for paper pattern, and random paper signing insert function, can adapt to different number of tags inserted paper; Check the quantity of paper to check whether the number of predetermined quantities is consistent with the actual number of paper. nd a number of paper devices to separate the required amount of paper from the paper pile.
Application: Rejects separator is mainly used in screening system as a part of waste paper processing line or used with other vibration screen.It can screen the rejects stock with high contents of light impurities. Design Feature: Under the normal pressure,the stock flows into rejects separator.Affected by the centrifugal force from high-speed rotating rotor,accepts are separated from the rejects by passing through the screen plate.At the same time,with the rotating effect of the rotor,the accepts will flow into the next process and the rejects will be defibrized again.Furthermore,the rejects will be flushed continuously with water in order to recycle the stock in the rejects.
Paper cutting machine is the equipment that cut into flat paper in paper industry. It is divided into two kinds: knife cutting machine and paper cutter. The blade cutter consists of a slitting mechanism consisting of upper knife, lower knife, rotary long knife and fixed base knife. Can be divided into 6-10 paper rolls at the same time. The flat knife cutting machine is the platform of the adjustable knife, the size of the flat sheet. Paper cutting machine is made up of paper cutting machine and industrial paper cutting machine. Daily paper cutter with toilet paper cutter, napkins, paper cutter, paper cutter, square paper cutter, the production of paper cutter, clean toilet paper cutter, such as tissue paper cutter of paper cutting machine. According to different paper products, the corresponding paper cutting machine is different. Paper cutting machine The paper cutter is more a band saw, which is a bandsaw cutter used to cut toilet paper roll paper. The strip saw cutter is equipped with automatic knife and movable platform, which can be cut into the finished product according to the required length and width.
Application: Disc thickener is mainly used to wash and thicken stock in pulping and papermaking process.Its working principe is to dewater by gravity through the level difference between stock out of disc wire and white water in the disc.The pulp at the consistency of 0.8-1.2% enters the vat and then is attached to disc sector .The white water in the disc flows to the disc flows to the ends of hollow shaft through guide slot and then discharges out.Stocks attached on disc sector is knocked off by high-pressure shower.The thickened stock at the consistency 3-6%flows over the plate of adjusting valve into outlet vat where it is discharged out.The rotating speed of main shaft can be adjusted according to the required outlet consistency and capacity. Design Features: Higher efficiency and less space required. Disc sector is made of stainless steel with excellent corrosion resistance. Due to the structure of disc sector,the filtering area is large amount of white water when operating.
Roller, also known as a roller, is a cylindrical part, driven and driven roller. It is widely used in various transmission systems such as round screen printing machine, digital printer, mine conveying equipment, papermaking and packaging machinery. It is usually made of seamless steel tube, and it is necessary to adopt such as aluminum alloy 6061T5, 304L / 316L stainless steel, 2205 duplex stainless steel, steel casting, solid forging alloy steel core as material. The rollers are mainly composed of rollers, initial static balance, shaft overturning assembly welding, fine car and fine balance, etc. If the tolerance of shape is like roundness, the cylinder and straightness are required to be below 0.2mm, then the cylindrical grinding machine needs to be machined after the fine car. If the surface hardness is required, the heat treatment process needs to be increased. According to the size of classification, there is a large such as papermaking machinery with roller (length can reach more than 10 meters, more than 1500 mm in diameter), small, such as automatic assembly line of belt conveyor with pinto roller (generally within 1 meter length, diameter is 159 mm)
Single-effect fiber separator is a kind of pulping equipment used in papermaking industry. It is mainly used to separate the heavy and heavy items in the pulp, and the slurry from the water pulping machine is broken down twice. Structure: mainly composed of base, shell, impeller, bearing frame, cutter plate, sieve plate, etc. Principle: pumping slurry from the cylinder above along the tangent direction into the separation chamber, the centrifugal force generated by high speed rotating impeller to make pulp do circular motion inside the separator, heavier than major impurities in pulp was quickly rotate to the periphery along the wall, heavy slag into the slag system. The light impurities are concentrated in the center under the action of centripetal force, which is discharged by the outlet of the center front end under pressure, and the good pulp after separating the impurities passes through the sieve plate to the next process. Purpose: to remove all kinds of impurities from waste paper materials by using the fiber weight difference, which has the function of dredging, separation and coarse screening. It is usually set up as secondary ground pulp and separation equipment after the hydraulic shredder. It can also be used as the finishing equipment for tailings. Structural features: It has two basic functions, such as separation of light impurities and heavy waste Lower waste paper can be used to reduce the pretreatment of raw materials. The production capacity of existing hydraulic pulper can be improved, and the energy consumption can be reduced by 40-60%. High quality pulp can be obtained, fiber loss is small, improve screening efficiency, and yield is 2-2.5 times of traditional single effect Tectonics 1. The cylinder The cylinder adopts wear resistance and pressure resistance design standard, material is stainless steel or carbon steel. Pulp by entry along the tangent direction into the cylinder, the rotor high-speed rotation of the centrifugal pulp raw material, and the light impurity separation, light impurity by cylinder gland central discharge, heavy impurities by the principle of centrifugal force, along the cylinder tangent into the sand tank. 2. The rotor The rotor adopts special shape design, which can effectively separate the weight impurities. The inside of the rotor is equipped with a clean water pipe to prevent the mesh from being blocked. The rotor blade adopts replaceable high - wear high - wear strength alloy steel. The rotor body is cast steel or cast stainless steel. 3. The sieve plate The aperture of sieve plate is 2.5-6mm Usually newsprint, magazine paper for the use of 2.5-4mm Corrugated paper, box board paper is 3.5-6mm fan The sieve plate is assembled in pieces, easy and easy to replace the sieve plate.
The spray pipe is mounted on the paper machine rack for cleaning roller surface. The roller has a jet tube on the inside of the page to prevent slurry or paper. When the roller surface works normally, press the copper network down 2 to 3 cm, so the wet paper is pressed tightly, the density increases, the surface is horizontal, and the surface is left with the proper net mark. With the pressure drop in the pressure zone, there is a certain negative pressure in the wedge area of the outlet side of the pressure zone. The water in the face roller net slowly falls down, and the part of the slurry will be sucked up. As the circular motion of the decorative roller must exist in the direction of the direction of the movement perpendicular to the copper network, it can cause the splashing phenomenon. Its working principle: by using different power to drive the piston shaft, drive the high pressure water spray reciprocation, supporting the use simple water filter to solve nozzle clogging, however high pressure water can efficiently through needle nozzle flush paper pilot nets, rotary screen and blanket, thickener and a variety of washing equipment; Or wet blanket with a fan nozzle. The best flushing effect is achieved. Namely, reciprocating a secondary blanket blanket.
Rewinding machine Rewinding machine is a special equipment for papermaking. The purpose of this paper is to make the paper roll (called the original paper roll) produced by the paper machine, and the paper will be made into finished paper after being rerolled. At present, the replacement of dc drive in the paper industry has become a development trend in the paper industry. By rewinding machine rolls of paper roll is more soft, there may be damaged or broken, the internal side edge is not neat, paper width and cannot be used directly in paper processing or printing machine, such as most kinds of paper (such as newsprint, letterpress printing paper, wrapping paper, etc.) must pass a rewinding machine, cutting, cutting edges joint, heavy volume on the paper roll core formed a certain specification, a certain tightness requirements of the finished paper roll to the factory. The rewinding process mainly accomplishs three tasks: first, remove the original paper; Second, cut the entire piece of original paper into a number of dimensions that meet the user's specifications; Third, control the roll diameter of finished paper rolls to meet the factory specifications. Features of the rewinding machine Compact structure, convenient operation Feed platform, cut slot Winding, roll and traction are all adopted by frequency conversion technology PLC programmable controller as the core processing unit The touch screen serves as a human-computer interface High precision tension control Automatic attenuation tension taper control Fixed length reduction Fixed-length parking Positive rotation and reverse function Electrostatic elimination function Equipment features: 1. Applicable to the production of toilet paper roll paper; 2. PLC control, frequency control and touch screen operation; 3. The production of core and no core roll; 4. Can replace different pitch spacing and clear the hole; 5. Stable performance and efficient production capacity
Waste Paper Stripper Machine/waste Paper Clean Tools/carton Box Stripper Packaging consumables/expendable supplies Quick Details Product Description Waste Paper Stripper Machine/waste Paper Clean Tools/carton Box Stripper 1.High-speed running gear is cycle driven through air motor, strip waste margin paper with sharp teeth gear. 2.The gear use high strength diamond Compound after heat treatment high hardness, wear resistance,long life and easy replacement. 3.The product is high efficient manual stripping equipment, stripping efficiency is improved by 10times. 4.Compact configuration, almost the same weight as normal grinder, easy to use worker can operate the machine after simple training. 5. No damage for bonding area while stripping, improve the efficiency of the following.
