Jinan Automobile Chemicals Suppliers and Manufacturers

Chemical Bag, OEM is welcomed! Size, material ( poly, paper, plastic (woven) laminated with kraft paper, logo, were produced as per clients requirement. 5 KG, 10 KG, 20 KG, 25 KG, 40 KG, 50 KG, 500 KG, 1000 KG, 1500 KG, are regular size.

Solvent chemicals are substances that are used to dissolve, suspend, or extract other substances. They are commonly used as a medium for chemical reactions and as a cleaning agent. Solvents can be organic or inorganic, and they can be classified according to their polarity, which refers to the distribution of electrical charge within the solvent molecule. Polar solvents, such as water, have a high affinity for ions and are good at dissolving ionic compounds. Nonpolar solvents, such as hydrocarbons, have a low affinity for ions and are good at dissolving nonpolar compounds. Solvents are used in a wide range of applications, including the formulation of paints, adhesives, inks, and cleaning products. They are also used in the extraction of natural products, such as essential oils, and in the separation and purification of chemical compounds. Solvents are an important component of many , as they are used to dissolve active ingredients and to facilitate the delivery of drugs through the body. In addition, solvents are used in the laboratory as a medium for chemical reactions and to dissolve reactants.

Our company is committed to providing high quality and reliable chemicals and additives for water treatment, petroleum exploitation, textile printing and dyeing, paper making/printing, daily chemical industry, etc. - Poly Aluminum Chloride,PAC CAS:1327-41-9 - Acrylic Acid Polymer,PAAS CAS:9003-04-7 - Acrylic Acid-2-AcrylaMido-2-Methylpropane Sulfonic Acid Copolymer ,AA/AMPS,CAS:40623-75-4 [Acrylic Acid/AMPS,CAS:40623-75-4] - Xanthan Gum,CAS:11138-66-2

Water treatment chemicals.

Water treatment chemicals Form: trichloroisocyanuric acid powder, trichloroisocyanuric acid granule, trichloroisocyanuric acid tablet. Synonym: trichloroisocyanuric acid, tcca 1.Characters: white powder, granule(8-30 mesh, 20-60 mesh) or tablet(20-200g per piece) 2.Specification: active chloride 90% 25kg carton

Antimony Trioxide (also called: antimony oxide, and antimony white informally) Molecular formula: Sb2O3 Molecular weight: 291.5 1) Technical index: Chemical Composition and Physical Performance of Antimony Trioxide Brand Name: Sb2O399.80 Sb2O399.50 Chemical Composition% Sb2O3not less than 99.80 99.5 Impurity not more than As2O3 0.05 0.06 PbO 0.08 0.10 Fe2O3 0.005 0.006 CuO 0.002 0.002 Se 0.004 0.005 Physical Performance Whiteness is not less than % 95 93 Granularity at average(um) 0.3-0.9 0.9-1.6 1.6-2.5 0.3-0.9 0.9-1.6 1.6-2.5 2)Application Antimony trioxide was one of the items firstly applied as inorganic flame retardant, being mixed with halogen compound as assistant object, with retardant role in the heat decomposition process, replacing the halogen compound partially, being applied at the sectors of plastic, rubber, chemical fiber, enamel, pigment, paint, glass, electron, etc. Internal plastic with knitted exterior covered with film, with the net weight of 25kg .

24kw, 40kw, 60kw, 120kw, 180kw, 260kw, 400kw, 500kw, 600kw Gas Engine/Bio-Gas Generators with more competitive price than same power diesel engines, and such models within 45 days leading time. (1000kw and 2000kw Gas Engine/Bio-Gas Generators, the price is not much competitive as the same as the Spanish or EU standards, so we suggest our clients use 2 x 500kw or 4x 500kw Gas Engine/Bio-Gas Generators in combined lines.) Both our Gas Engine/Bio-Gas Generators with output voltage is 380V~440V, 50Hz, 3 phases, or if customer demands the frequency of 60Hz, we also can modify our Siemens Generator to meet such specific demands. Power: 24KW-600KW output voltage: 380V~440V, 50Hz, 3 phases Speed: 1000R/M: Gas Conditions: CH4 fª70% H2S Limitation< 50 mg/m3 Humidity< 80% Temperature: 25 -40C Bio-gas Conditions: Bio-gas Temperature

Detailed Product Description Especially designed for household electric appliances. With a compact structure, high security and reliable. With a good price/performance ratio. Rated current: 1A-50A according to the part no.

Chemicals and food additives.

Name:Ring Gear Material:4140HT Size:OEM YB has been obtained successively: AD 2000 Merkblatt W 0 + PED 97/23/EC,ISO9001-2008,China Special Equipment Production License, Keep Contracts Regard Credits Enterprise and etc Honors Qualifications. YB provide OEM parts in various materials. The machining range is: Maximum ring type �¤3000mm, Maximum shaft type 12000mm, maximum workpiece single weight 16T, minimum size tolerance: 0.007mm. Products are widely used in: aviation and aerospace, military and civilian ships, transportation, petrochemical industry and etc fields. website:https://www.ybfactory.com email:caroline@ybfactory.com Tel: 0086 531 83260061

Gear Reducer: Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03. -All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required. Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E NB:Gear reducers shall be shipped full of oil and ready to be placed into operation High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9

Gear Reducer: Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03. -All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required. Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E NB:Gear reducers shall be shipped full of oil and ready to be placed into operation High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9

Gear Reducer: Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03. -All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required. Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E NB:Gear reducers shall be shipped full of oil and ready to be placed into operation High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9

Product Name: FOTON Truck Spare Parts-Clutch Disc-1106916100004 Product Description: Mainly used for FOTON trucks, Parts Number: 1106916100004 Packaging Method: Wooden cases or Carton boxes or designed by customers' requirements. Delivery Method: By sea or by air or discussed with customers. Delivery Time: Within 10 workdays after receiving the deposit. Trade Term: EXW, FOB, CFR, CIF, DAF, etc. After-sales service: Response and provide satisfactory solutions within 24 hours. Our Advantages: Competitive Price ; Durable Quality ; On Time Delivery ; Excellent After-sales Service.

Oee supplies power end parts such as crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps: Emsco:f-500, f-800, f-1000, f-1300, f-1600 National oilwell::8-p-80, 9-p-100, 10-p-130, 12-p-160 Gardner denver:pz-8, pz-9. The products quality is in accordance with the stipulation of api (american petroleum institute).Oeeí»s high quality products perform excellent under high pressure, high temperature, and corrosion. Oeeí»s product equipments conform to the requirement of api as well, the processing of products is reasonable and effective. Crosshead and crosshead guide are made of astm a48-83 meehanite featuring good abrasion resistance and long service life. Pinion shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.

Dpt blowing agent This product is hardly dissolved in ether, slightly dissolve in water, alcohol, and the chloroform. It can dissolve in acetone, butanone, acetyl, acetic acid, ethyl ester and dimethylformamide. Specifications : in accordance with ministerial standards: hg2-1188-78. Hg2-1188-78