Chemical Bag, OEM is welcomed! Size, material ( poly, paper, plastic (woven) laminated with kraft paper, logo, were produced as per clients requirement. 5 KG, 10 KG, 20 KG, 25 KG, 40 KG, 50 KG, 500 KG, 1000 KG, 1500 KG, are regular size.
Solvent chemicals are substances that are used to dissolve, suspend, or extract other substances. They are commonly used as a medium for chemical reactions and as a cleaning agent. Solvents can be organic or inorganic, and they can be classified according to their polarity, which refers to the distribution of electrical charge within the solvent molecule. Polar solvents, such as water, have a high affinity for ions and are good at dissolving ionic compounds. Nonpolar solvents, such as hydrocarbons, have a low affinity for ions and are good at dissolving nonpolar compounds.
Solvents are used in a wide range of applications, including the formulation of paints, adhesives, inks, and cleaning products. They are also used in the extraction of natural products, such as essential oils, and in the separation and purification of chemical compounds. Solvents are an important component of many , as they are used to dissolve active ingredients and to facilitate the delivery of drugs through the body. In addition, solvents are used in the laboratory as a medium for chemical reactions and to dissolve reactants.
Our company is committed to providing high quality and reliable chemicals and additives for water treatment, petroleum exploitation, textile printing and dyeing, paper making/printing, daily chemical industry, etc.
Circular or back seam bags or square bottom top mouth or with valve, pp raw material, can be printed as per each client's artwork, regular printing or bopp film lamination are popular. From 30cm to 130cm width. Widely used in rice, feed, pet food, chemical, sugar, flour, additive, construction material, flood, etc.
BOPP laminated bag & colorful printed PP woven bag
Material: Bopp film, PP woven
Size/Capacity: 5 KG, 9 KG /10 KG, 20 KG, 40 KG, 50 KG, etc..
Printing: 1-7 colors or as per client's artwork, logo
Lamination: two sides bopp film lamination or single side.
Folder/sewing: top folder/ sewing or heat cut or easy open mouth, bottom single/double stitch or bottom strip, or others.
Usage:seed, fertilizer, chemical products, agriculture products, feed, etc.
Antimony Trioxide (also called: antimony oxide, and antimony white informally)
Molecular formula: Sb2O3 Molecular weight: 291.5
1) Technical index: Chemical Composition and Physical Performance of Antimony Trioxide
Brand Name: Sb2O399.80 Sb2O399.50
Chemical Composition% Sb2O3not less than 99.80 99.5
Impurity not more than As2O3 0.05 0.06
PbO 0.08 0.10
Fe2O3 0.005 0.006
CuO 0.002 0.002
Se 0.004 0.005
Physical Performance Whiteness is not less than % 95 93
Granularity at average(um) 0.3-0.9
0.9-1.6
1.6-2.5 0.3-0.9
0.9-1.6
1.6-2.5
2)Application
Antimony trioxide was one of the items firstly applied as inorganic flame retardant, being mixed with halogen compound as assistant object, with retardant role in the heat decomposition process, replacing the halogen compound partially, being applied at the sectors of plastic, rubber, chemical fiber, enamel, pigment, paint, glass, electron, etc.
Internal plastic with knitted exterior covered with film, with the net weight of 25kg .
24kw, 40kw, 60kw, 120kw, 180kw, 260kw, 400kw, 500kw, 600kw Gas Engine/Bio-Gas Generators with more competitive price than same power diesel engines, and such models within 45 days leading time.
(1000kw and 2000kw Gas Engine/Bio-Gas Generators, the price is not much competitive as the same as the Spanish or EU standards, so we suggest our clients use 2 x 500kw or 4x 500kw Gas Engine/Bio-Gas Generators in combined lines.)
Both our Gas Engine/Bio-Gas Generators with output voltage is 380V~440V, 50Hz, 3 phases, or if customer demands the frequency of 60Hz, we also can modify our Siemens Generator to meet such specific demands.
Especially designed for household electric appliances.
With a compact structure, high security and reliable.
With a good price/performance ratio.
Rated current: 1A-50A
Name:Ring Gear Material:4140HT Size:OEM
YB has been obtained successively: AD 2000 Merkblatt W 0 + PED 97/23/EC,ISO9001-2008,China Special Equipment Production License, Keep Contracts Regard Credits Enterprise and etc Honors Qualifications.
YB provide OEM parts in various materials. The machining range is: Maximum ring type �¤3000mm, Maximum shaft type 12000mm, maximum workpiece single weight 16T, minimum size tolerance: 0.007mm. Products are widely used in: aviation and aerospace, military and civilian ships, transportation, petrochemical industry and etc fields.
website:https://www.ybfactory.com
email:caroline@ybfactory.com
Tel: 0086 531 83260061
Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03.
-All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required.
Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting
Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E
NB:Gear reducers shall be shipped full of oil and ready to be placed into operation
High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E
Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9
Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03.
-All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required.
Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting
Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E
NB:Gear reducers shall be shipped full of oil and ready to be placed into operation
High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E
Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9
Double helical involute, double reduction. Its unique features result in a gear reducer that can withstand heavy cyclic loads and provide years of service with minimal maintenance. Meets or exceeds API 11 The torque rating of the gears shall be as determined by API Specification 11E and AGMA Specification 422.03.
-All pinions and shafts shall be made of 4145 high alloy steel. Material certifications are required.
Gear Reducer Housing:Gear Reducer is a two piece housing is ASTM A48 gray iron casting
Gear Reducer Lubrication:An exclusive feature of every VENDOR unit is its gearbox Positive oil lubrication system. This unique system should uses oil buckets to fill troughs that continuously feed the right amount of oil to each gearbox bearing, regardless of the direction of rotation, at pumping speeds as low as 1 strokes per minute without modification (wipers not required). The reducers oil capacity should be large enough to operate with no sump. Meets API 11E
NB:Gear reducers shall be shipped full of oil and ready to be placed into operation
High/Intermediate/Low Speed Bearings:The gear reducer should contains properly sized anti-friction bearings, rather than energy-consuming bronze bushings. Each bearing is set in a carrier for ease of removal and installation. Should meets or exceeds API 11E
Gear Reducer Seals:High and Low speed shaft should use Butadiene acrylonitrile rubber seals. Meets AP111E Section 7.4.9
Oee supplies power end parts such as crank shaft, pinion shaft, crosshead, bull bear, pulsation dampener, frame and so on for following triplex mud pumps:
Emsco:f-500, f-800, f-1000, f-1300, f-1600
National oilwell::8-p-80, 9-p-100, 10-p-130, 12-p-160
Gardner denver:pz-8, pz-9.
The products quality is in accordance with the stipulation of api (american petroleum institute).Oeeí»s high quality products perform excellent under high pressure, high temperature, and corrosion. Oeeí»s product equipments conform to the requirement of api as well, the processing of products is reasonable and effective.
Crosshead and crosshead guide are made of astm a48-83 meehanite featuring good abrasion resistance and long service life.
Pinion shaft is made of forged alloy steel, on which a herringbone gear with the medium-hard teeth surface is machined.
This product is hardly dissolved in ether, slightly dissolve in water, alcohol, and the chloroform. It can dissolve in acetone, butanone, acetyl, acetic acid, ethyl ester and dimethylformamide. Specifications : in accordance with ministerial standards: hg2-1188-78.
AXLE ASSEMBLY, howo axle, Truck brace rod, transmission shaft, front shaft
TRUCK CHASSIS
Model Number : SZ939000358
Applicable Models : Howo
Unit : Set
Material : Original factory
Place of Origin : Jinan
Advantage : New component assembly, internal copper sleeve reinforcement, forged gear assembly, strong bearing capacity, long service life
Aftersale Service : Three Months
Hot Sale Sinotruk Heavy Duty Truck, Howo Road cleaning Truck and various Truck parts such as, Engine Gearbox Assembly,Truck Cab Parts, Truck Chassis Assy, Truck Engine Assembly, Truck Gearbox Parts.
If you want to know more about our products, please click here.
1379 Automobile Chemicals Suppliers
Short on time? Let Automobile Chemicals sellers contact you.
