1,2-Pentanediol is an important organic intermediate for the synthesis of propiconazole, a special fungicide for commercial crops; it also has excellent moisturizing properties and antiseptic effects. It is used in various skin care products such as skin cream, eye cream, skin lotion, baby care products, sunscreen, etc. It is also an important raw material for the production of polyester fibers, surfactants, pharmaceuticals and other products.
Dimethyloldimethyl hydantoin is a popular preservative with moderate sensitizing potential, it is used to control against mold, mildew, and bacterial spoilage. This preservative is similar to imidazolidinyl urea, as both act by releasing formaldehyde into the formulation. Cosmetic expert panels have determined that Dimethyloldimethyl hydantoin has an excellent safety record for use in both leave-on and washoff cosmetic preparations. Maximum-use concentrations are set at 0.2 percent in the u.S. and 0.6 percent in the european union. Dimethyloldimethyl hydantoin stands for dimethylimidazolidine, though in a listing the acronym is rarely spelled out.
5-bromo-5-nitro-1,3-dioxane is an antibacterial compound that is effective against gram-positive and Gram-negative bacteria and fungi, including yeast. Used for preparing cosmetics, coatings, etc
Sodium hydroxymethylglycinate is a highly effective, broad-spectrum preservative, which can effectively inhibit Gram-positive bacteria, Gram-negative bacteria, yeasts and molds. This product is a 50% sodium hydroxymethylglycinate aqueous solution, which can be used in shampoos, cold waves, hair dyes, conditioners, soaps, shampoos and other alkaline cosmetics and detergents. The general addition amount is 0.2-0.6%. Features: This product is still very stable in a solution with a PH value of 3-12, so it can be used in strong alkaline cosmetics and detergents.
Fungicide, used in paint, pigment, leather, wood, etc. It is an effective antiseptic and antiseptic, mainly used in cosmetics, daily chemicals, paint, leather, plastic, wood, metal cutting fluid, wood discoloration control, Textiles, paper industry, ink, adhesives, etc. This product is a new anti-dandruff, antipruritic, bactericidal and antiseptic. At the same time, this product is low-toxic and non-irritating at the use concentration (â?¤ 0.1%).
Sodium bromide can be used as raw material in the preparation of liquid photographic film; medically as sedative, the brominating agent in printing and dyeing; it can also be used in synthetic fragrances and other chemicals. In addition, it can also be used for organic synthesis and so on.
Metal cutting fluid bactericide MBM is a slow-release bactericide with broad spectrum and high efficiency and a certain gas-phase sterilization ability. It is suitable for inhibiting the growth and reproduction of microorganisms in various humid environments, preventing the generation of putrefaction and foul odors, and ensuring safe operation of the system. Sexual fungicide, the product has good solubility, suitable for oil and water based systems. In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal. MBM is a new generation of broad spectrum and low toxicity developed for water-based metalworking fluids Sexual fungicide, the product has good solubility, suitable for oil and water based systems. In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal. MBM is effective against both gram-negative and Gram-positive bacteria. MBM is effective against both gram-negative and Gram-positive bacteria.
Bactericide; Industrial sterilization and mildew prevention; Efficient and broad spectrum bactericide and algicide; It is used to manufacture rubber products such as cables, wires and tires.
As an antiparasitic, it is capable of treating roundworms, hookworms, and other kinds of helminth species that can attack wild animals, livestock and humans. It also has effects of inhibiting the angiogenesis of cells. The mechanism of action is still not fully understood. It has found that Thiabendazole is capable of suppressing the helminth-specific mitochondrial enzyme fumarate reductase, further inhibiting the citric acid cycle, mitochondrial respiration and ATP production, leading to helminth's death. It may also inhibit the microtubule polymerization processes.
Zinc Chloride has the property of dissolving metal oxides and cellulose.Molten Zinc Chloride has good electrical conductivity.Zinc Chloride can be used as a dehydrating agent and catalyst in the organic synthesis industry,as well as mordant,sizing agent and weighting agent in the dyeing and weaving indutry.Zinc Chloride can also be used as petroleum purifier and actiated carbon activator.The affinity of other material,it can be used as a fireproof substance for clothing and can also be used as a fabric odor cleaner.Zinc Chloride can attack metal oxides to generate MZnOCl2 which is principle of it as a metal flux. Water treatment field Zinc Chloride can help slow the rate at which water corrodes other metals
DBNPA is widely used in industrial circulating water systems, large air-condition, and large centers of sewage treatment to eliminate microorganisms and algae and shuck off clay. DBNPA is also used in the process of paper making to prevent reducing the quality of paper by the generation of microorganisms. DBNPA is suitable for metal cutting of cooling liquor, recovery system of oil, latex, and ply-woods as anti-spy biocides. DBNPA has the following advantages: easy to handle; no unusual oxidation hazards; similar performance and safety in paper and oilfield applications; used for slime control in the wet-end of the paper mill and performs exceptionally well against slime-forming bacteria. DBNPA has exhibited outstanding efficiency against bio-films and a broad spectrum of bacteria, fungi, and yeasts. Additionally, DBNPA series products are used in the short-term preservation of coatings and coating additives such as latex, starch, and mineral slurries. DBNPA is a fast-acting/quick-kill biocide that is broad-spectrum and does not contain or release formaldehyde.
Sodium- chlorite (NaClO2) is a white crystalline solid, being able to accelerate the burning of organic substances. It is used in paper manufacture, water purification bleaching wood pulp, textile, fats, and oils, as a disinfectant and in many other fields. In the organic synthesis, it can be frequently used for the oxidation of aldehydes to carboxylic acids. It can also be used to convert Alkyl furans to the 4-oxo-2-alkenoic acids. Moreover, the acidified sodium- chlorite (mixture of sodium- chlorite with acid such as citric acid) can be used for the sanitation of the hard surfaces as well as rinsing of many foods. In Arm y, it can be used to combating contaminants such as benigh microbes and food pathogens.
4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water vapor. Stable in hot water.
Description N-NONANE (cas 111-84-2) Quick Details Chemical Name: N-NONANE CAS No.: 111-84-2 Molecular Fomula: C9H20 Molecular weight:128.26 Chemical Structure: Appearance: colorless liquid Assay: 99% Item Specification Color saybolt +28 Initial boiling point C 143 Dry point C 153 Specific gravity 20Ckg/m3 700-728 N-onane content % 99 Total sulfur ppm 1 Water content ppm 50
1.Used as an intermediate in organic synthesis. It is liquid, soluble in organic solvent, slightly soluble in water. It is a low toxicity, high efficiency and broad spectrum anti-mildew agent. It has strong killing effect on mold and can achieve ideal anti-mildew effect. 2.It can be widely used in coating, paint, lubricating oil, shoe polish, leather chemistry, wood products and cultural relics protection and many other products.
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
CMIT/MIT is a liquid biocide with outstanding advantages such as rapid inhabitation of growth and macromolecule synthesis, broad spectrum activity, effective at low concentration and against biofilm as well as a wide pH range, biodegradable non-persistent in the environment, non-surface activity, infrequent dosing, easily deactivated, compatibility, low toxicity, water soluble, non-foaming, cost effectiveness etc. The active ingredient is a mixture of two isothiazolines. CMIT/MIT is ideally suited to meet the requirement of an industrial water treatment biocide for bacteria, fungi and algae paper mill slimicide.
The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm. Performance characteristics 1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small. 2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion. 3. Miscible with water; can be added in any production step; easy to use. 4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely. Usage and Cautions 1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae. 2. Avoid direct eyes' contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed. 3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition. 4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product.
Thiram is sodium N,N-dimethyldithiocarbamate. It is an intermediate of the fungicides thiram, ferram, thiram, zinc thiram, and nickel thiram. This product is a disinfectant and can be used as 1% medicated soap. It is also used as a polymerization terminator for styrene butadiene rubber. Intermediate of rubber accelerator TMTD and pesticide thiram. Used as a terminator for emulsion polystyrene butadiene rubber, styrene butadiene latex, industrial fungicides, metal precipitants, vulcanization accelerators for rubber products, agricultural pesticides, etc. Sodium thiram, that is, sodium N,N-dimethyldithiocarbamate , Is the intermediate of the fungicide thiram, ferram, ferram, zinc thiram and nickel thiram.
Polyacrylamide is a linear water-soluble polymer, and is on of the most widely used varieties of water-soluble polymer compounds. PAM and its derivatives can be used as efficient flocculants, thickeners, paper enhancers and liquid drag reducing agents, and Polyacrylamide are widely used in water treatment, paper making, petroleum, coal, mining, metallurgy, geology, textile, construction and other industrial sectors.
