Find Verified Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers, Manufacturers and Wholesalers

Rated votage¡êo48v
Working wind speed: 1.8-25m/s
Survival max wind speed¡êo40m/s
Working temp.: -30¡«50¡æ

As buyer's request

We supply horizontal wind turbine: range from 200w to 100kw .

Pallet.

rated output¡êo600w
épeak output¡êo1100w
¡érated voltage¡êo24v
¡éstart-up speed (m/s)¡êo0.20.4
;¡écut-in speed (m/s)¡êo1.3
;¡érated wind speed (m/s)¡êo10
¡éworking wind speed (m/s)¡êo1.25
8¡ésurvival max. Wind speed (m/s)¡êo40
9¡érotor diameter¡êo|¦ì1.7m
10¡énumber of blade¡êo3pcs
1blade material¡êoaviation duralumin
1éworking temp range¡êo-30æ50æ

As buye's request

1kw wind turbine is a device that converts wind energy into electrical energy to charge the battery pack or interface with the public grid. It can be widely used in windy areas. Now we have a 24v/48v off-grid working system and wind and solar hybrid system. It can provide power for lighting, televisions, washing machines, refrigerators, telecommunications equipment, etc. Grid-connected working system: the wind generator outputs a three-phase alternating current, and the grid-connected controller PWM converts the alternating current into direct current, providing a stable direct current voltage for the grid-connected inverter. The power supply can be used for household appliances to interface with the additional power supply of the public grid.

Characteristic of generator set
1.The design manufacture and test of the engine unit fully comply with national standard GB/T282097;
2.Take unified charge of the design, manufacture and test before delivery of the generator set;
3.Equipped with PERKINS engine ,with advanced technology ,reliable performance and long service life;
4.The excitation system of the generator can make the generator set to bear any twinkling loading and can get restored quickly from frequency fluctuation;
5.The low reactance design of the generator has made extremely low wave form distortion under non-linear load ,and has good motor starting ability;
6.PERKINS Corporation provides quality assurance to all series of its products;
7.CPERKINS Corporation has established a professional service network all over the country ,and provides 24 hours after sale service and supply of parts for clients.

Nitrogen generator for car, light truck and bus tyres

Index:
1, pressure input: 7kg/cm2~10kg/cm2
2, n2 pressure output: 6kg/cm2~16kg/cm2
3, n2 purity: 97~99.9%
4, n2 capacity: 3-10 cbm/hr
5, n2 display model: automotive n2 dynamic simulative system
6, cms: 220cms
7, standard accessories: pressure increasing system installed, 2*n2 tanks installed, vacuum system, tire inflation gun, high pressure tubes
8, machine size: 550*650*1300 (mm)
9, weight: 150kg
10, power system: ac220v 50hz or ac110v 50hz

Nitrogen generator produce high purity n2 for inflating tyres, with inflating with n2, you can get:

1, longer term stability of the tyre pressure
2, better grip and handling
3, reduced fuel consumption about 2-10%
4, longer tyre life about 25%
5, enhanced safety
6, more economy

Non-wood case, 150kg.

Product Type : Interlinings & Linings
Material : 100% Polyester
Technics : Non Woven
Width : 150cm
Use : General Clothing & Garment
Place of Origin : Guangdong, China
Brand Name : Baiyu
Model Number : X18-K6WP
Usage : General Clothing & Garment
Coating : PES or PA
Weight : 20 - 140gsm
Color : White, Black, Charcoal, Customized
Fusing Temperature : 130 - 150 Degrees

The 5 blades horizontal axis wind turbine has a smart blade aerodynamics braking and electromagnetic speed limitation function. Patented aerofoil 5 blades design with true symmetrical and twisted aerodynamic feature which ensures rotor capture maximum power from wind and operates in amazingly low noise and minimal vibration. True symmetrical and balanced aerofoil blade ensure rotor matching with generator perfectly. Large ratio of tip section chord to root section chord and variable chord airfoil blade ensures rotor start-up easily and running smoothly with high torque and RPM at lower wind condition. Aerodynamic blades designed with over-speed braking system to make sure generator well protected in higher wind. Reinforced Glass-Fiber Nylon is using advanced thermoplastic engineering and precision injection molding technology for higher strength, flexibility and reliability. Our wind turbine with minimal vibration and low noise could be mounted on rooftop safely and its operation wonâ??t affect resident.

Mono: 165w to 230w.
Poly: 200w to 250w .

Carton.

We supply high quality fiber cement board, which can be used wall panel, both interior and exterior wall, it is water-proof and fireproof.

The standard size: 4'x 8' (1220x2440), thickness from 4mm to 16mm.

iency can reach above 90%;
6.Automatic water control, with anti-dry function. Automatic electrical control, no water power;
7.Complete combustion, stable: equipment in micro pressure condition, no generation of
Tempering and off the fire phenomenon. Lnvestment, low operation cost; biomass combustion
Mechanism has reasonable design, used for various boilers retrofit cost low, operation than
Oil-fired boiler heating costs by 63%; electric furnace, gas furnace is energy-
Saving environmental transformation, upgrading of the best choice.
Ps: according to customer requirements and provide customized non-standard designs.

Wooden shell

GZ Nianguan manufacture a broad range of power solutions.
Ranging from solar panels, wind generators, "Grid Tie Inverter", automotive inverters,
off grid controller/inverters, backup power solutions (UPS) ,water pump system and diesel generators etc..

We can do almost anything (reasonable). What is most important is what CUSTOMER need.

Our specialty is complete power solutions.
We often get very involved in our customers projects to help them maximize their profitability.

Here at Guangzhou Nianguan Electronics Technology Co.Ltd. we pride our self on having excellent customer service
with good English language skills. We have almost 24/7 availability on email, skype, msn, qq, yahoo etc... (24/7 emergency phone contact).
Being responsive, precise and thorough is part of the core of our business philosophy. Welcome to contact us .

1000w pure sine wave with charger


Rated Capacity:1500VA
Rated Power :1050w
No load current :less 1.2A
Transformer : C.R.G.O
Interface : LCD
Display Status :working & loading & battery
Input Voltage : 140~275 Vac
Frequency :45~65 Hz
Output Voltage : 220Vac ±1% for inverter; 220Vac ±8% for regulator
Frequency : 50/60 Hz ± 0.5Hz, subject to the main
Wave form : Pure sine wave
Wave distortion : ≤ 3%
Protections Overload protections:YES
High temperature protections : YES
Outputhigh/lowvoltage protections: YES
Battery lowvoltage protections: YES
Battery Over-charge, over-discharge, reversed polarity protection
Short circuit : YES
Transfer Time: LESS THAN 4ms
Battery Voltage :24V DC
Charge Voltage :27.6±0.5V
Low Battery Voltage Limit :22V ±1V
Battery Low Voltage Protection Point :21V ±1V
Charge Current Max:10-20A Optional
Cooling system: YES
Environmental Operating temperature:0-40c
Relative humidity : 10%~90% RH, non-condensing
Storage temperature : -15c - 45c

Function:

1.Replace and exceed surgery

2.Skin tightening and lifting

3.Eliminate true and false wrinkles

4.Repair gravidity lines

5.Acne treatment

6.General anti-aging

Advantages:

1.Non-surgery

2.Non-invasive

3.Non-bleeding

4.Non-wound

5.Non-pain

6.No scar

7.No convalescence

8.Short treatment time

9.High-efficiency

10.Long effect maintaining

Shu anda s300 series sightseeing elevator to introduce a new generation of internationally advanced vvvf ac transformer, frequency control technology, fully computerized automatic control system, serial communication, the performance is complete, stable quality, unique design style car body. Has a bright, fresh, rich and elegant, plain in showing "european" brand of fresh, simple and intimacy. We can according to customer's characteristics, preferences, needs, caring for your happy with the design product.

15.6" TFT with resistive touch screen, SVGA solution.
Adult, Pediatric, Neonate default.Parameter is adjustable by ideal body weight to set patient's information.
electronic driven electronic control ventialtor,Turbine.
Ventilation types: Invasive,Non-invasive,Oxygen Therapy.
Ventilation ModeIPPV: VC-ACVPC-ACVPVC-ACVVC-SIMVPC-SIMVPVC-SIMVCPAP/PSVCPAP-VG Back-up:PCV.
Special function: Manual breath, standby, screen lock, inspiratory hold, expiratory hold, sign, ATC, Calibrate, Nebulizer, O2 function.
Lung mechanics parameters,5 Waveforms disaplay, loops(P-V,V-F,P-F).
PEEP: Off, 1.50cmH2O.
Tidal Volume 20-2000mL option2-200ml.
Built in electronic PEEP valve.
Built in Lithium ion battery, 2 battery,5200mAh.