output power RMS): 150W +150W 4 with BLUETOOTH function with USB/SD & FM function 6 MIC input double 10-band graphic EQ Panel size(LxH): 48.3x 22(cm) 430*380*22MM 11KG
output power: 60W output mode: 4-16ohm/70v/100v with USB/SD & FM function remote control with BLUETOOTH function independent control or left and right sound volume 2 MIC input Panel size(LxH): 28x 6.5(cm) Size:280*205*65mm
- aluminum front panel - 60w+60w output power - optical function - hdmi support hifi devices input ( 2 way input, 1 way output) - usb slot support mp3/wma format audio files - wireless bluetooth function - with microphone input function - a/b group output seperately control - electrical fan cooling
Features: - aluminum hair line front panel and knobs - toroidal big power transformer, original imported amplifier tube - usb/sd slot support mp3, wma, hifi ape, flac format audio files - with lcd display - bluetooth receiver, compatible with ios and android system - fm tuner, automatic search and save channels, can preset 50 channels - high level digital karaoke, can match with wireless microphone Technical specification - input impedance: 200mv/47ko - signal-to-noise:>78db - load impedance: 4~16o - frequency response: 20hz-20khz - output power: 100w+100w - machine size: 430x340x125mm
Aluminum front panel, toroidal transformer Dual-10 phase eq, 6 way microphone inputs Usb/sd card slot support mp3/wma audio files, led display, fm tuner, remote control 515*420*770mm, 3sets per ctn
The vp series power amplifier offers clean, reliable power in a durable enclosure. If you need professional amplification performance, the vp series is perfect for delivering pure, consistent wattage night after night. With six models power upto 1200 watts, the vp series is ideal for powering pa systems and dj rigs. To ensure seamless, reliable performance, the amp features variable-speed cooling fans for thermal stability, along with short-circuit, thermal, over current, thermal protection. For connecting convenience, the vp series boasts xlr and speakon &banana binding post outputs. The unit also provides front panel indicators for signal, limit, protect and power, plus level controls for channels 1 and 2. Selectable modes for stereo and mono bridge give you even more flexibility. Selectable output power range to drive professional loudspeakers without clipping Variable-speed cooling fan for thermal stability and reliability Xlr balanced inputs and speakon &banana binding post outputs Limiter indicator for amp output protection Stereo and mono bridge Variable speed fan for low noise Comprehensive front panel indicators including signal, limiter, protect and power Dc output protection and short circuit protection Frequency response 10hz c 50khz at 1.5 db Total harmonic distortion: less than 0.05% Input sensitivity & impedance: 0.775v Signal to noise (20 hz - 20 khz) > 95db Shipping dimensions (wxdxh) 585x 580 x 165mm
Features : * Switching power supply High efficiency and stability of the new switching power supply so that the signal transmission speed faster and more stable voltage changes, sensitivity stronger, lighter weight. * Intelligent signal limiter Each channel has an independent output signal overload distortion, automatic pressure limited function, when the output signals are now clipping distortion can be quickly restored to the output signal compression is not the biggest distortion level and no reduction in the frequency response of audio signals, to avoid DC level because of the audio signal output and burned speakers. * Multiple detection, multiple protection A soft start, the second start, the (low) pressure protection, output overload and short circuit protection. * High efficiency, low fever Efficient Class H amplifier, significantly reduce heat loss. * Pristine audio Metal Packaging, high-power transistors, Yanyi a pure, passionate, authentic audio effects. * Removable face Network Removable the hole into the wind-net, easy cleaning. FP-series Switching Power Amplifier ITEM: FP-2200 / FP-2400 / FP-2600 / FP-2800 Output Power: 20-20kHz, 1W with 1 khz 8¬+Stereo Power(RMS): 350W f- 2 / 550W f- 2 / 750W f- 2 / 950W f- 2 4¬+Stereo Power(RMS): 500W f- 2 / 800W f- 2 / 1150W f- 2 / 1350W f- 2 8¬+Bridged Power(RMS): 1000W / 1600W / 2100W / 2300W Frequency Response(+o/-0.3dB,1W/8¬+): 20-20KHz+0.5dB THD+N: 10KHZ
8ohms Stereo Power(RMS): 2X1050W 4ohms Stereo Power(RMS): 2X1600W Frequency Response(+o/-0.3dB, 1W/8ohms): 20Hz-20kHz, -3dB@135kHz Power Bandwidth (rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input THD+N (1kHz 1W ): -60dB Voltage Gain (rated power @ 8ohms): X40dB Input Sensitivity (rated power at 8ohms): 0.8V Input Impedance (balanced/unbalanced): 20Kohms/10Kohms S/N Ratio ("A"weighted, full power at 4ohms): 96.5dB Crosstalk ("A"weighted, full power@4ohms): >-65dB Class: 3 Step H Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent) Supply Power: 4158W Power Supply (factory configured): AC220V/230V, 50-60Hz Cooling: Two side panel variable speed DC fans, better than conventional cooling Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches. LED Indicators (per channel): Signal, Protect, Active, Critical Construction: Steel chassis, 16 gauge. Casting Aluminum front panel. Dimensions (HXWXD): 132X483X480mm (3U) Net Weight: 33.5kg Gross Weight: 34.35kg.
F600 Power Amplifier Key Feature: * 2/3U high, heavy duty steel chassis * Modular construction for easy servicing * Symmetrical layout for even weight distribution * High efficiency toroidal power transformer * Oversized, high energy, linear power supply * 3 steps, Class H Audio topology * Stereo, parallel or bridged operation * Twin balanced inputs (Neutrik XLR connectors) * Dual Speakon and Binding posts outputs * High quality components used throughout * Dual, continuously variable speed fans * Efficient two sides cooling, the efficiency is better than back to front cooling * Active, signal, protect and critical indicators * Duraluminium, 8mm thick front-panel * Unobtrusive carrying handles * Voltage Gain: 35 or 40 dB . Specification: 8ohms Stereo Power(RMS): 2X300W 4ohms Stereo Power(RMS): 2X462W 8ohms Bridged Power(RMS): 968W Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input THD+N (1kHz 1W ): -60dB Voltage Gain (rated power @ 8Ic): X35dB Input Sensitivity (rated power at 8Ic): 0.97V Input Impedance (balanced/unbalanced): 20KIc/10KIc S/N Ratio ("A"weighted, full power at 4ohms): 99dB Crosstalk ("A"weighted, full power@4ohms): >-63dB Class: 3 Step H Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent) Supply Power: 1320W Power Supply (factory configured): AC220V/230V, 50-60Hz Cooling: Two side panel variable speed DC fans, better than conventional cooling Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches. LED Indicators (per channel): Signal, Protect, Active, Critical Construction: Steel chassis, 16 gauge. Casting Aluminum front panel. Dimensions (HXWXD): 88X483X480mm (2U) Net Weight: 19.2kg Gross Weight: 23kg.
Features: High power round transformer, low work noise, Low magnetic leakage, high efficiency Device infixed to prevent front thunder and over voltage Automatic over current and short circuit Automatic reset circuit. Sound Light alarm Inside power Plug-in and tree- way feed output Ranging from 3Amps to 10Amps. Technology Parameter Item UnitForwardRemark FrequencyMHZ5-1000 Input voltageAC220í+10% Output voltageAC60v í+ 10% Plugging lossDB< or =0.5 Return lossDB>15 Return timeS5 í+5 Max output current Sum of all output current must be under the MAX current VolumeMn270mn*195 Dimensionsmm268*212*197 WeightKGS6.7.
1. FM/AM stero controlling modulation 2. Using TOSHIBA TA8127N IC 3. Without screen cover, fulfill electromagnetic compatibility demand. 4. Playback super-DVD disk, the number of single disk could be over eight hours. 5. 3000 pcs KARAOKE song without changing disk, also support USB function without disk playback. 6. During playback MP3 disk, the system can remember the fixed MP3 playback sequence without power supplying. 7. Digital multiplication of AV to VGA mode to realizing video signal transferring completely. 8. The algorithm of combination in software and hardware to realizing one by one scan function 9. with colorful XP Chinese and English pop-ups menu, iconic design. 10. Fully support DOLBY AC-3, compatibility with HDCD and other digital video form. 11. Playback with MP3 and JPEG simultaneously. 12. Compatibility with SUPER-DVD, SVCD, VCD, DVCD, MP3,CD, HDCD and CD-R/RW disk. 13. Can imitate the output mode of concert hall, theater and athletic fieldí»s sound effect 14. Music dynamic spectrum-super-sonic function. 15. Interlock function for the controlling key. 16. Cassette has recorder and playback function. 17. With Guitar input jack. 18. Wireless microphone inside. 19. Automatic exchange for AC 220V/50HZ and DC12V34A (rechargeable battery) supply, and car power supply function. 20. The max power is 120W, continuously playback with music in 3-8 hours.
Detailedú¦ 1. SMD electronic hardware,SMT technologyical maintain high quality. 2. Corrar clip transmitter,high sensitivity,prevent howling,clear timbre. 3. Quartz surge circuitry,steady frequency without disturbance. 4. 65 group VHF 180-265MHz.no disturbance in frequency,have large scope for selection. 5. Two kind of power to choose:built-in rechargeable battery,external 12V DC. 6. When use the DC sudden power off,embedded storage battery auto-work. 7. Wire and wireless microphone loadspeaker. 8. With digital reverberation. 9. Collar clip microphone and handhoid microphone for your choice. DVD function.
Output Power:2X75W(8ª+) 2X90W (4I) Frenquency Response:20Hz-20KHzí+3dB Input Sensitivity:250mv SNR:85dB Distortion:
Output Power:2X75W(8ª+) 2X90W(4ª+) Frenquency Response:20Hz-20KHzí+3dB Input Sensitivity:250mv SNR:85dB Distortion:
GA500 mini digital amplifier Introduction C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply. Features 1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals. 2. The digital power amplifier features best sound, high efficiency and high reliability. 3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction. 4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission. 5. Suitable for many applications like commercial, company, entertainment, school and army etc. Specifications Output power 8ª+: 300w x 2 (1khz) 4ª+: 600w x 2 (1khz) Bridged 8ª+: 1000w (1khz) Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel. Input sensitivity: 0db Input impedance : 20kª+ú¿ balance ú¬ 10kª+ú¿ unbalance ú¬ Frequency response : >20í½20khz @8ª+ Thd+n: 0.01% ú¿1khz, 1wú¬ S/n: 110dbú¿ a weighted ú¬ Power supply : ac110v/220vú¿ two kinds power supply ú¬ Fuse cube current : 20aú¿ac110vú¬ 10aú¿220vú¬ Net weight : 3kg Gross weight : 3.5kg Net dimension ú¿l*w*hú¬: 387 *155 * 57 mm
Amplifier Parameters unit p-pa1200 p-pa1500 p-pa2500 p-pa3500 Output power stereo @ 8 ohm watt 2x400 2x550 2x700 2x1000 Output power stereo @ 4 ohm watt 2x600 2x800 2x1100 2x1500 Output power bridged @ 8 ohm watt 1000 1500 2000 2800 Frequency response hz 20hz-20khz; +0.1/-0.3db (1w / 8 ohm) T.H.D db
3-channel with built-in 2in-3out German-made DSP channel-1: 250W@8ohms, 500W@4ohms; RMS channel-2: 250W@8ohms, 500W@4ohms; RMS channel-3: 250W@8ohms, 500W@4ohms; RMS Size:104mm X 223mm X 60mm (WXLXH) Please check our product on http://www.ad-power.cn packed into carton
Model name: H1.3D1 3-channel with built-in 2in-3out, DSP is fm Germany. channel-1: 250W@8ohms, 500W@4ohms; RMS channel-2: 1200W@8ohms, 2300W@4ohms;RMS channel-3: 120W@8ohms, 2300W@4ohms;RMS Size:150mm X 431mm X 70mm (WXLXH) Please check detail pictures on our website http://www.ad-power.cn. Each piece into carton
EDFA Optical Amplifier 1U Rack EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
Amplifiers.
