Power Amplifier, Dj Amplifier, Audio Amplifier

Amplifiers


Packing in cartons.40" high cubic. Shipment by sea form Mumbai / jnpt port India.

Features:
1.built in adjustable Gain & Slope
2. Built in power supply
3. Connectors:"F"type female
4. Output test point and screw terminal for equippotential bonding
5. Metal-Plastic Housing For indoor mounting

Specifications:
ModelAS205S
No.of Inputs3UHF, 1BIII, 1BI+FM
No.of Outputs2
Frequency UHF1: (MHz)470óª862
UHF2: (MHz)470óª862
UHF3: (MHz)470óª862
BIII: (MHz)174óª230
BI+FM: (MHz)47óª68/88óª108
Gain(UHF1,UHF2,UHF3,BIII,BI+FM) (dB)20
Output Level(UHF1,UHF2,UHF3,BIII) (dBuv)115
BI+FM: (dBuv)110
Slope Adj. (dB)20
Slope Adj.ú¼Typical (dB)15
Return Loss (dB)_óª12
Noise Figure (dB)<6
Test Point Attenuation (dB)_óª20
Power Supply (Vac/Hz) 90óª260/47óª63
Max AC Pass Current(switchable) (mA)1200
DC Pass (V)18
Operating Temperature Range (¿¼C)-20óª+60.

We are the authorised dealers for "amperes"-known for its complete range of equipments in conventional public address systems in india.

The iso9001: 2000 certification that amperes obtained in 2006 for "design and manufacturing of public address system" only demonstrates full commitment in producing the most optimum and affordable equipments for our customers.
Amperes has been directly involved in thousands of installations, be it small or large, simple or complex, part or full systems at airports, hospitals, government offices, recreation facilities, hotels, schools, universities, shopping malls and hundreds of other public spaces.
Amperes is present in the following locations worldwide: singapore, brunei, uae, vietnam, sri lanka, india, philippines, indonesia, myanmar and thailand.

Features:
High power round transformer, low work noise, Low magnetic leakage, high efficiency Device infixed to prevent front thunder and over voltage
Automatic over current and short circuit Automatic reset circuit. Sound Light alarm Inside power Plug-in and tree- way feed output
Ranging from 3Amps to 10Amps.
Technology Parameter

Item UnitForwardRemark
FrequencyMHZ5-1000
Input voltageAC220í+10%
Output voltageAC60v í+ 10%
Plugging lossDB< or =0.5
Return lossDB>15
Return timeS5 í+5
Max output current Sum of all output current must be under the MAX current
VolumeMn270mn*195
Dimensionsmm268*212*197
WeightKGS6.7.

Amplifier

Amplifier
Parameters unit p-pa1200 p-pa1500 p-pa2500 p-pa3500
Output power stereo @ 8 ohm watt 2x400 2x550 2x700 2x1000
Output power stereo @ 4 ohm watt 2x600 2x800 2x1100 2x1500
Output power bridged @ 8 ohm watt 1000 1500 2000 2800
Frequency response hz 20hz-20khz; +0.1/-0.3db (1w / 8 ohm)
T.H.D db <0.1%@350w into 8+(60hz&7khz) <0.1%@550w into 8+(60hz&7khz) <0.1%@700w into 8+(60hz&7khz) <0.1%@1500w into 8+(60hz&7khz)
Voltage gain 68x standard 86x standard 97x standard 110x standard
Slew rate v/us 40v/us
Input impedance oh 20k ohm, balanced
10k ohm, unbalanced
Hum and noise db -103db
Cross talk db <60db
Indicators (per channel) temp/dc led, clip led, signal led, power led, bridge led
Protection temperature, /dc, sub/ultra -sonic, sonic, short circuit, igm, output
Connections 3-pin xlr female & 1/4÷ phone jack for input; speakon & banana plug for output
Cooling 2 variable speed dc fans
Controls 2 front pan attenuators, rear panel signal ground lift jumper

Dimension (unpacked) mm 133x483x450 133x483x450 133x483x510 133x483x510
Carton size mm 235x545x545 235x545x545 235x545x605 235x545x605
Net weight (unpacked) kg 24 25 31 34
Gross weight kg 25 26 32 35
Pcs / 20" cl pcs 400 400 359 359
Pcs / 40" cl pcs 829 829 744 744
Pcs / hq cl pcs 971 971 872

8ohms Stereo Power(RMS): 2X1050W
4ohms Stereo Power(RMS): 2X1600W
Frequency Response(+o/-0.3dB, 1W/8ohms): 20Hz-20kHz, -3dB@135kHz
Power Bandwidth (rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8ohms): X40dB
Input Sensitivity (rated power at 8ohms): 0.8V
Input Impedance (balanced/unbalanced): 20Kohms/10Kohms
S/N Ratio ("A"weighted, full power at 4ohms): 96.5dB
Crosstalk ("A"weighted, full power@4ohms): >-65dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 4158W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.



Dimensions (HXWXD): 132X483X480mm (3U)
Net Weight: 33.5kg
Gross Weight: 34.35kg.

F600 Power Amplifier Key Feature:
* 2/3U high, heavy duty steel chassis
* Modular construction for easy servicing
* Symmetrical layout for even weight distribution
* High efficiency toroidal power transformer
* Oversized, high energy, linear power supply
* 3 steps, Class H Audio topology
* Stereo, parallel or bridged operation
* Twin balanced inputs (Neutrik XLR connectors)
* Dual Speakon and Binding posts outputs
* High quality components used throughout
* Dual, continuously variable speed fans
* Efficient two sides cooling, the efficiency is better than back to front cooling
* Active, signal, protect and critical indicators
* Duraluminium, 8mm thick front-panel
* Unobtrusive carrying handles
* Voltage Gain: 35 or 40 dB .

Specification:
8ohms Stereo Power(RMS): 2X300W
4ohms Stereo Power(RMS): 2X462W
8ohms Bridged Power(RMS): 968W
Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz
Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8Ic): X35dB
Input Sensitivity (rated power at 8Ic): 0.97V
Input Impedance (balanced/unbalanced): 20KIc/10KIc
S/N Ratio ("A"weighted, full power at 4ohms): 99dB
Crosstalk ("A"weighted, full power@4ohms): >-63dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 1320W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.



Dimensions (HXWXD): 88X483X480mm (2U)
Net Weight: 19.2kg
Gross Weight: 23kg.

Pav series four-quadrant simulation power amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions.
It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc.

It is also the ideal r&d device of wind power, pv, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc.
It can directly connect to the popular simulation platform.