Haynes 25, also known as L-605 alloy, is a high-temperature, high-strength, and highly corrosion-resistant superalloy. It is developed and produced by Haynes International, Inc. in the United States and is typically used in high-temperature, high-pressure, and highly corrosive environments.
The main components of Haynes 25 alloy are cobalt, chromium, molybdenum, iron, and tungsten, with cobalt content exceeding 50%. This gives it better high-temperature strength and corrosion resistance than other nickel-based alloys. The alloy also has excellent high-temperature oxidation and thermal corrosion resistance, can be used in high-temperature environments up to 1200â??, and has good machinability and weldability.
Here are the Haynes 25 alloy's various country standards in English:
US: AMS 5537, AMS 5796, AMS 5797, AMS 5800, AMS 5801, AMS 5803, AMS 5876, AMS 5894, ASTM B424, ASTM B425, UNS R30605
Europe: EN 2.4964
Germany: DIN 17744, VdTÃ??V 424
France: AFNOR NC 22 K, AIR 9165
UK: BS HR 5, BS HR 504, BS HR 505
Japan: JIS NW6025
We can provide the following the form:Haynes 25 coil; Haynes 25 strip;Haynes 25 plate; Haynes 25 sheets; Haynes 25 tube; Haynes 25 pipe;Haynes 25 flat; Haynes 25 bar
GB/JIS:NW alloy L-605/UNS:R30605/W.Nr:2.4964
Haynes 25 alloy has a wide range of applications in various industries due to its excellent high-temperature strength, corrosion resistance, and oxidation resistance. It is commonly used in gas turbine engine components, such as combustor liners, turbine blades, and afterburner parts. It is also used in the aerospace industry for hot section components, including heat shields, jet engine exhaust systems, and rocket motor components. In addition, Haynes 25 alloy finds use in chemical and petrochemical processing, where it is utilized for equipment such as reactors, distillation columns, and heat exchangers. It is also employed in high-temperature furnace components, such as muffles, retorts, and flame shields.
Hastelloy C-276 is a nickel-molybdenum-chromium superalloy with exceptional corrosion resistance in a variety of aggressive media. It was developed by Haynes International in the 1960s as a more versatile alternative to other nickel alloys such as Hastelloy B-2 and Hastelloy C-4. The high chromium content in Hastelloy C-276 provides superior resistance to oxidizing environments, while the molybdenum and tungsten enhance resistance to reducing media. The nickel content also makes Hastelloy C-276 highly resistant to chloride-induced stress corrosion cracking.
Hastelloy C-276 has a wide range of applications in industries such as chemical processing, pulp and paper production, waste treatment, and pollution control. Its resistance to hot sulfuric acid and chlorine environments makes it suitable for use in scrubbers, ducting, and piping systems. It is also used in flue gas desulfurization systems and in the production of organic chemicals such as acetic acid and acetic anhydride.
Hastelloy C-276 is a versatile alloy that can be easily fabricated using traditional techniques such as hot and cold forming, welding, and machining. It can also be heat treated to optimize its properties for specific applications. For example, annealing at temperatures between 2050�°F and 2150�°F can improve resistance to intergranular attack, while solution annealing at 2150�°F followed by rapid quenching can enhance resistance to localized corrosion.
Overall, Hastelloy C-276 is an excellent choice for applications that require superior corrosion resistance and high strength in aggressive environments. Its versatility, ease of fabrication, and excellent mechanical properties make it a popular choice in a variety of industries.
The following are the various national standards for Hastelloy C-276 alloy:
United States: AMS 5750, AMS 5751, AMS 5796, AMS 5587, ASTM B366, ASTM B462, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N10276
Europe: EN 2.4819
Germany: DIN 17744
France: AFNOR NC 17 D
United Kingdom: BS HR 202, BS HR 403
Japan: JIS NW 0276
We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-276 plate; Hastelloy C-276 sheets; Hastelloy C-276 tube; Hastelloy C-276 pipe;Hastelloy C-276 flat; Hastelloy C-276 bar
GB:GH2761/JIS:NW 0276/UNS :N10276/W.Nr:2.4819
Hastelloy C-276 has a wide range of applications in industries such as:
Chemical processing
Pulp and paper production
Waste treatment
Pollution control
Scrubbers, ducting, and piping systems in sulfuric acid and chlorine environments
Flue gas desulfurization systems
Production of organic chemicals such as acetic acid and acetic anhydride.
It is also used in various other applications where corrosion resistance and high strength are critical.
(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.
(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.
(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.
(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.
(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.
(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.
(7) Grade 309:Better temperature resistance than grade 304.
(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.
(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.
(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.
(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.
(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.
(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.
1.Material 201/201/203/304/304L/309/309/309S/310/310S/316/316L/410/430,ect
2.Standard ASTM,GB,JIS,ect
3.Thickness 0.3-100mm
4.Width 600-1524mm
5.Length 1000-6000mm or as customer�¢??s requirement
6.Surface finished 2B/BA/HAIRLINE/8K/NO.4/NO.1
7.Technique Cold rolled/hot rolled
8.Packing Craft paper+steel plate packing
9.Productivity 5000T/M
10.Payment TT/LC/Western union
11.Delivery time 10-15days after received the deposit
12.Loading port Foshan port,Guangzhou port,Shenzhen port(China)
13.MOQ 5tons
14.Application A. Automotive Trim and Molding
B. Builders Hardware, Fasteners ,and Furnace Parts
C. Interior Architectural Trim and Paneling
D. Kitchen Trim and Equipment
E. Zippers, Vaults, and Tubing
F. Machinery, Television Cones, and Storage Vessels
Coils (hot rolled coil) is a slab (mainly billet) as raw material, heated by a roughing mill and finishing mill group made ??of steel. From finishing the last one out of the hot strip mill by laminar cooling to the set temperature, the coiling machine rolled into steel rolls, steel strip coils cooled, depending on the needs of users, through various finishing operations line (smooth, straightening, transverse or longitudinal, inspection, weighing, packaging and signs, etc.) processing and become steel, flat steel product volume and slitting. As the hot rolling steel products with high strength, good toughness, easy molding excellent performance and good weldability, etc., which are widely used in coil ships, automobiles, bridges, buildings, machinery, pressure vessels and other manufacturing industries.
Patterned stainless steel coils:
Material: sus304, 201, 316, 430,
Width (mm): 1000, 1219, 100-1500, or customize size
Thickness: 0.3-3 mm
Surface: mirror surface, hairline surface, sand blast surface,
Vibration surface, etched surface, embossed surface,
Pattern: as sample or customize pattern
Our products are widely used in sus decoration project such as elevator decoration, luxurious doors, outdoor projects, wall decoration, advertisement nameplates, furniture, ceiling, corridor, hotel hall, shop window various stainless steel series.
Our end users are oriental pearl, world expo 2010, apple, mitsubishi, marriott, accor, hilton etc.
Advantage of stainless steel:
Make the stainless steel colorful and good looking.
Very easy to clean,
Product maintenance free
Free from rust and soil
Free from polluting your environment
Free from panting it yearly.
Long lifespan.
Low life cycle cost.
Stainless steel coils of top wing metal co., ltd
Grade: 304/201/202/439/430/443 etc
Specifications
1) standard: astm, aisi, gb, jis, din, en
2) thickness: 0.15mm-3.0mm
3) width: 7mm-1800mm
4) length: coils or acc to your request
5) surface finish: 2b , ba , 8k mirror, hairline, no.4, sb, linen embossed, etched & pvd coated etc.
6) package: standard seaworthy package for export or upon your request.
Features
1. Excellent machinery property of deep draw quality suitable for various stainless steel products .
2. Stable and smooth surface finish free from any dust , dirty or oil.
3. Accurate in thickness in whole coils.
Application
Stainless steel coils widely used in chemical industry equipment, industrial tanks, general application medical instruments, tableware, kitchen utensil, kitchen ware, architectural purpose, milk & food processing facilities, hospital equipment, bath-tub, reflector, mirror, interior-exterior decoration for building, architectural purposes, escalators, kitchen ware etc.
