(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers. (2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content. (3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus. (4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames. (5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment. (6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel. (7) Grade 309:Better temperature resistance than grade 304. (8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines. (9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment. (10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials. (11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks. (12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts. (13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.
Example: 304 coil, 1219mm*1.0mm(thickness), 20 tons, 20ft container, FOB. Final price: $3100--$3200,USD
550mm 1mm thickness coils 3 tons/ coils, $1500/tons, $4500/coil. FOB, CIF
J series of 201 stainless steel | J1, J2, J3, J4, J5 J1: The carbon content is slightly higher than J4, and the copper content is lower than J4. Its processing performance is not as good as J4 material. It is suitable for ordinary shallow deep drawing and large angle deep drawing products such as decorative panels, bathroom products, sinks, and product pipes. J2, J5: Decorative tubes are easy to process, high hardness (both above 96�°), polished and beautiful, but they are easy to burst when used for square tubes or curved tubes (90�°). In terms of flat panel, due to its high hardness, the surface of the panel is more beautiful, and surface treatment such as frosting, polishing, and color plating can be carried out. But the biggest problem is bending, bending is easy to break, planing is easy to burst, so the ductility is not good. J3: High carbon, low chromium and low copper, but because of its high carbon content and low copper content, the material is slightly harder, so it is not suitable for bending with a slightly stronger strength. Compared with 201 stainless steel J1 material, the ductility is not so good, and it is easier to rust in the same environment. 201 stainless steel coil In the field of narrow bands, the emergence of 201 stainless steel J3 can better meet the requirements of pipe manufacturers for corrosion resistance and deformation. Because it can reduce the cost of raw materials for pipe manufacturers, it is sought after by pipe manufacturers in the narrowband field. J3 material is easy to process in veneer, but not difficult. The master of the processing factory said that he used J3 material to bend the board, and there would be an inner seam after it was broken (for black titanium, color board series, sanding board, when it is broken apart, there will be an inner seam when folding). The material of the sink has been bent 90 degrees, and it will not work if it continues. J4: The material of J4 is a relatively high-end variety in the J series of 201 stainless steel. It is suitable for deep drawing products with small angles. Most of the products that need deep drawing and salt spray test will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc.
Standard: Astm, Aisi, Din, en, Gb, Jis Thickness: 0.15~4.0mm Width: 1000mm, 1220mm, 1250mm, 1500mm or Customized Length: 2000mm, 2440mm, 2500mm, 3000mm or Customized Edge: Slitting Edge or Mill Edge Surface: Ba, 2ba, No.4, Hl, Mirror, Color-coating, Etched, Embossed, Vibration or Customized
Coils (hot rolled coil) is a slab (mainly billet) as raw material, heated by a roughing mill and finishing mill group made ??of steel. From finishing the last one out of the hot strip mill by laminar cooling to the set temperature, the coiling machine rolled into steel rolls, steel strip coils cooled, depending on the needs of users, through various finishing operations line (smooth, straightening, transverse or longitudinal, inspection, weighing, packaging and signs, etc.) processing and become steel, flat steel product volume and slitting. As the hot rolling steel products with high strength, good toughness, easy molding excellent performance and good weldability, etc., which are widely used in coil ships, automobiles, bridges, buildings, machinery, pressure vessels and other manufacturing industries.
Patterned stainless steel coils: Material: sus304, 201, 316, 430, Width (mm): 1000, 1219, 100-1500, or customize size Thickness: 0.3-3 mm Surface: mirror surface, hairline surface, sand blast surface, Vibration surface, etched surface, embossed surface, Pattern: as sample or customize pattern Our products are widely used in sus decoration project such as elevator decoration, luxurious doors, outdoor projects, wall decoration, advertisement nameplates, furniture, ceiling, corridor, hotel hall, shop window various stainless steel series. Our end users are oriental pearl, world expo 2010, apple, mitsubishi, marriott, accor, hilton etc. We provide below also: Coloured stainless steel sheets, mirror stainless steel sheets, Etched stainless steel sheets, embossed stainless steel sheets, stainless steel tubes, Stainless steel products, Stainless steel pipes, Special shaped stainless steel tubes, Special-shaped stainless steel pipes, hairline stainless steel sheets, vibration stainless steel sheets, patterned stainless steel sheets, golden stainless steel sheets, blue stainless steel sheets, black stainless steel sheets, red stainless steel sheets, stainless steel coil, color stainless steel sheets, colored stainless steel sheets, coloured stainless steel sheets, satin stainless steel sheets, Advantage of stainless steel: Make the stainless steel colorful and good looking. Very easy to clean, Product maintenance free Free from rust and soil Free from polluting your environment Free from panting it yearly. Long lifespan. Low life cycle cost. Wood or plywood box, as demand
Stainless steel coils of top wing metal co., ltd Grade: 304/201/202/439/430/443 etc Specifications 1) standard: astm, aisi, gb, jis, din, en 2) thickness: 0.15mm-3.0mm 3) width: 7mm-1800mm 4) length: coils or acc to your request 5) surface finish: 2b , ba , 8k mirror, hairline, no.4, sb, linen embossed, etched & pvd coated etc. 6) package: standard seaworthy package for export or upon your request. Features 1. Excellent machinery property of deep draw quality suitable for various stainless steel products . 2. Stable and smooth surface finish free from any dust , dirty or oil. 3. Accurate in thickness in whole coils. Application Stainless steel coils widely used in chemical industry equipment, industrial tanks, general application medical instruments, tableware, kitchen utensil, kitchen ware, architectural purpose, milk & food processing facilities, hospital equipment, bath-tub, reflector, mirror, interior-exterior decoration for building, architectural purposes, escalators, kitchen ware etc.
Stainless Steel Coil 201 Cold Rolled Stainless Steel Coil 1.Grade: 201 2.Surface Finish: 2B 3.Thickness: 0.2-2.0mm. 4.Width: 50-950mm. 5.Application: Kitchen Sink/Cookware.
Stainless Steel Coil 410 Cold Rolled Stainless Steel Coil 1.Grade: 410. 2.Surface Finish: BA/HL 3.Thickness: 0.15-3mm. 4.Width: 50-950mm. 5.Application: Kitchen Sink/Cookware.
Stainless steel coils Thickness: 0.25mm-2.0mm Width: 30mm-600mm Stainless steel pipes Types: round and square pipes Standard: ASTM A554 Grades: 201, 202, 301, 304, 304l, 316, 316l, etc. Thicknesses : 0.25mm to 2.0mm, Od: 8mm to 114mm Regular length: 6 m. Standard export packing.
Product description Packing: export standard packing Productivity: 2000mts/month Trademark: KSICO Origin: china Technique: cold rolled Surface treatment: polished Application: stainless steel products Type: coil Stainless steel coil 1. Grade: 201, 409, 410, 430 2. Surface finish: 2b, ba, 8k 3. O. D: 25mm-1500mm 4. Thickness: 0.25mm-3.0mm. Payment : t/t. Packing: standard export packing, as per customer's requirements.
Specification: thickness:0.15mm-3.0mm width:7mm-1250mm Finish: 2b, ba, no.1, no.4, no.8, mirror, 8k, brush, bright, hair line, linen/embosse. Special finishing of sheets: stainless steel etching sheets, embossed sheet, sheets for elevator(lift), pvd mirror sheets in different color, plating sheet Package: export package, pvc film with wooden pallet/box, or according to clients.
Specification: Grade: 200 series: 201 Finish: 2b, ba, no.1, no.4, no.8, mirror, 8k, brush, bright, hairline Strips width: within 1250mm Thickness: 0.2-3.0 mm Special finishing of sheets: stainless steel etching sheets, embossed sheet, sheets for elevator(lift), pvd mirror sheets in different color, plating sheet 1.Payment:by t/t30% prepaymant and the balance payment within 10 days sight at copy of b/l 2.Delivery time: 30days but after receive 30% prepayment. 3.Thickness tolerance:+2c. 4.Quantity allowerance:ía10%.Payment as the actually weight. Package: export package, pvc film with wooden palle
Specification: Grade: 200 series: 202 Finish: 2b, ba, no.1, no.4, no.8, mirror, 8k, brush, bright, hairline Strips width: within 1250mm Thickness: 0.2-3.0 mm Special finishing of sheets: stainless steel etching sheets, embossed sheet, sheets for elevator(lift), pvd mirror sheets in different color, plating sheet Standard: astm, jis Unit price/payment: t/t 1. Payment:by t/t30% prepaymant and the balance payment within 10 days sight at copy of b/l 2. Delivery time: 30days but after receive 30% prepayment. 3. Thickness tolerance:+2c. 4. Quantity allowerance:ía10%.Payment as the actually weight. Package: export package, pvc film with wooden palle
We are the factory of stainless steel coil and sheet, pls refer to our product as below, ur inquiry is appreciated Grade: 200series: 201 202 300series: 301 304 310s 316 316l 317 400series: 409 410 410s 420 420j1 j2 430 Width: 100mm-1250mm Thickness: 0.3mm-3.0mm Surface finished: ba 2b hl 8k Hv: 150-600 Ddq is available according to yr requirement Application: electronic components, medical industry, machinery furniture daily necessities, decoration, automobile, fluid transportation, industry instrument, agriculture, kitchenware etc Package: export package, pvc film with wooden pallet/box, ect Terms of payment: t/t. 30% deposite and the balance against the bl copy Dates of delivery: 20-25days but after receive 30% prepayment. It is depend on finial quantity.
Specification: 1) Grade: 201, 410, 430 2) Thickness range: 0.20mm to 2.5mm 3) Width: 300-1219mm 4) Edge: Mill Edge, Slitted Edge 5) Surface finish: 2B, BA, No. 4, No. 8, HL 6) Packing: Standard export packing 7)Tolerance:(1)on total quantity:+10%/-10% (2)on total value:+10%/-10% (3)thickness:+0,-0.02mm 8)Weighting:per actual weight Standard export packing, about 3-5mt for each coil
Export market :north america , eastern europe, southeast asia, mid east, western europe Cold rolled stainless steel coil Finish:2b, ba, no.4, hl Thickness:0.5mm-3.0mm Width:1000mm, 1219mm, 1500mm(mill edge/slit edge) Packing: export standard packing.
Product: stainless steel coil, stainless steel sheet, stainless steel circle, stainless steel embossed sheet, stainless steel strip, etched stainless steel sheet, pipe Surface finish: 2b, ba, no.8 super mirror finish, no.4, hl, etched, embossed, vibration , pvd coating and etc. Grade: sus 201, 202, 304, 430, 410, 409, 316, 316l Thick: 0.2-3.0mm Width: 30mm- 600mm , 1000mm& 1219mm&1250mm
Stainless steel coil Wooden packing
