Medical equipment and construction and heavy machinery, processing line, agricultural products,processing agricultural and mineral products, construction materials.Shipping, inspection,quality control,representative,consulting
China food additive Polyglycerol Esters of Fatty Acids(PGE) Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. Itâ??s an non-ionic surfactant with characteristics such as high temperature and acid� resistance and HLB value is 7.2. And its E code is E475, CAS NO.: 67784-82-1, the usual name is PGE or PGFE. Chemical Structure: Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fine and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 60â?? homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount: The addition maximum is 0.01% for bread and pastry, the maximum is 0.3% for ice cream. Technical Index (Refer to GB 13510-92):
Polyglycerol Esters of Fatty Acids(PGE) Chemical Structure: Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. It is an non-ionic surfactant with characteristics such as high temperature and acid� resistance and HLB value is 7.2. Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fine and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 60â?? homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount:
KRS NEW MATERIAL CO., LTD KRS new material Co., Ltd is engaged in refractory and insulation material for about 20 years and had a good reputation among customers all over the world. The main products of the company are high temperature resistant calcium silicate heat insulation products, ceramic fiber products,perlite product ,refractory brick,rock wool and other thermal insulation refractory materials. Products are widely used in the construction of urban heat network and the heat insulation of various kinds of kiln and pipeline in metallurgy, petroleum, chemical, cement, electronics, machinery, ceramics, glass, natural gas and other industries. Other specifications can be customized according to customer requirements. Water repellent products can be customized. KRS calcium silicate product description: Calcium silicate board products are made of SIO2 and CAO through high temperature and high pressure reaction, adding environmental protection fiber, new energy-saving insulation material without asbestos, the product can be long-term use in 650°-1050° high temperature environment, extend the service life of equipment. KRS PRODUCT PROPERTIES & ADVANTAGES: 1.Good durability, can bear high temperature within the limit of continuous heat load. 2.Non-deformation within the temperature range. 3.Low thermal conductivity, in the whole range are used with unmatched adiabatic performance. 4.Light weight, high strength. It is the highest in these hard thermal insulation products. 5.Better durability, use for a long time without powder. 6.Construction with ordinary carpenter applicability, tools can be optional cut products. 7.Used safety, hygiene. Excluding asbestos, sulfur, chlorine such poisonous substances. 8.Fear water, but after drying also can be used. Application of KRS calcium silicate: 1.Cement industry: preheaters and cyclone separators, decomposition kiln, tertiary air duct and cooler; 2.Nonferrous metallurygical industry: aluminum power calciner and electrolysis groove; 3.Petrochemical industry: Splitting furnace, catalytic cracking furnace, petroleum pipeline, underground heat-flooding; 4.Metallurgical industry (steel plant): hot-rolling heat furnace, cool-rolling mill set, RH vacuum degassing furnace, smelters, hot deformation and heat treatment plants; 5.Power plant:preheat stove, pipe; 6.Glass industry:melting furnace and recuperator, annealing furnace and cooling channels.
Inorganic salts, such as aluminium sulphate, ammonium bicarbonate, ammonium chloride, calcium chloride, dead burned magnesite, magnesium chloride, magnesium sulphate, morpholine, polyaluminium chloride (pac), potassium bicarbonate, potassium carbonate, potassium hydroxide (caustic potash), sodium bicarbonate, sodium carbonate (soda ash light/dense), sodium hydroxide (caustic soda flake/solid/pearl), sodium nitrate, sodium nitrite, sodium sulphate anhydrous.
Sodium alginate, seaweed fertilizer, sodium nitrite , sodium nitrate, lutein powder, paprika oleoresin, monascus red.
Feed, food, industry grade enzymes.
Food additive, sodium propionate, calcium propionate, benzoic acid, sodium benzoate.
Food additives, such as citric acid, sodium alginate, sodium saccharin, potassium sorbate, monosodium glutamte, xanthan gum, carbide calcium, potassium alginate.
Calcium carbonate additive, anti-foam agent, biodegradable resin, photo/biodegradable masterbatch.
Sodium gluconate, glucolactone, calcium gluconate, potassium gluconate, zinc gluconate, magnesium gluconate, ferrous gluconate, copper gluconate, manganese gluconate and gluconic acid solution.
Phosphoric acid food grade, phosphoric acid 75%, 81%, 85%..
Xanthan gum, potassium sorbate, alginate, agar agar, aspartame, acesulfame, ascorbic acid, saccharin, cyclamate, sodium benzoate, calpionate, citric acid, dextrose mono, sodium bicarbonate, wheat gluten.
Sodium alginate.
Oxalic acid and food grade phosphates.
Sweeteners: acesulfame-K, aspartame, sodium cyclamate, sodium saccharin, sucrlose, stevia, dextrose anhydrous, dextrose monohydrate, preservatives: calcium propionate, potassium sorbate, sodium acetate, sodium benzoate, acidity regulators: citric acid anhydrous, citric acid monohydrate, dl-malic acid, dl-tartaric acid, fumaric acid, lactic acid, potassium carbonate, thickeners: agar, carboxy methyl cellulose-CMC, carrageenan, konjac gum, xanthan gum, sodium alginate, vatamin : VC VE, amino acid, sodium glutamate, wheat gluten, ethyl vanillon, vanillin, non dairy, grape seed oil, paprika oleoresin, turmeric yellow.
Food additives and pharmaceutical materials such as corn starch, maltodextrin, liquid glucose, dextrose mono&anhy, sorbitol, mannitol, sodium gluconate, ascorbic acid, citric acid, xanthan gum, aspartame.
Milk powder, non-dairy creamer, calcium gluconate, zinc gluconate, ferrous gluconate, calcium citrate, zinc citrate, calcium carbonate of emulsification.
Urea Map Sop Mkp Dap Up Cn Cnb Dmap ,Potassium Humate, Humic Acid ,Amino Acid, Stpp, Tkpp, Npk ,Ammonium Sulphate.
Phosphoric acid, dicalcium phosphate, mono calcium phosphate, sodium triphosphate, vanillin, xanthan gum, sodium benzoate, benzoic acid, camphor, sodium fluoride, sodium sulfate, sodium sulfite, koh, tartaric acid, lactic acid, sodium citrate, oxalic acid, sodium hydratesufide, choline chloride , edta, edta-2na, edta-4na, salicylic acid, dccna, fumaric acid, foic acid, zinc oxide..
