Electrical safety tester, ac/dc power supply, power analyzer, ground power unit.
Temperature and humidity chamber, walk in temperature and humidity chamber, battery explosion proof temperature and humidity chamber, thermal shock chamber, rapid temperature change chamber, environmental stress screening, high temperature oven, vibration tester, drop tester, shock tester.
Product Introduction SF6 intelligent micro water quality tester is developed and designed according to the national power industry standard DL t506 2007 insulation gas humidity measurement method for sulfur hexafluoride electrical equipment and adopts the imported high precision dew point sensor and new digital circuit control technology. It is a high-precision intelligent instrument to measure the trace moisture content in SF6 gas. This instrument adopts intelligent self calibration technology wide measurement range fast response high accuracy good linearity dynamic display of measurement curve. At the same time the instrument also has an automatic dryer which can greatly reduce the measurement time. Technical Parameters Measuring range Dew point value 80 20 Moisture content 0 19999uLL Accuracy of measurement 0.5 60 20 1.0 80 60 The resolution of the Dew point value 0.1 Moisture content 1uLL Response time 20 0.1mpa 63 needs 5s 90 needs 45s 60 20 63 needs 10s 90 needs 240s 20 60 Sampling flow 0.6L min 20 Pressure range 01.0Mpa The use of temperature 20 60 Environmental humidity 0 100 RH Storage temperature 20 80 Charging time 4 hours The whole machine size 250 150 300mm3 The weight of The machine 3.5kg
Product Introduction AC and DC dual purpose AC and DC withstand voltage tester. The winding is theconcentric pagoda and multilayer cylindrical type low-voltagewinding in inner high-voltage winding in outside; Outer cover is portable which has characteristics such as volume smallness weight light the shape prettiness and move convenience and so on. xc control cabinet Technical Paramenters environment temperature 0 40 altitude 100m relative humidity 85% Main product specifications type specification capacity power source output operating mode Refer to the weight anthroposcopy V A V A XC-2 2 1 220 50 0-220 10 manual operation 14 XC-3 3 1 220 50 0-220 15 manual operation 16 XC-5 5 1 220 50 0-220 20 manual operation 18
This product is portable design,used in field to check watt-hour meter error. Accuracy class:0.05. 6.4inch TFT COLOR LCD measured CT variable ratio 0-600V/1MA-12A Check wiring and calculation electricy of compensation.
High voltage insulation equipment, transformer tester, circuit breaker, switch tester.Export, research and development
Testing Equipment Testers, Voltage Detectors, Battery Testers,Environmental Testing Chamber.
Goniophotometer, spectrophotometer, integrating sphere, photometer.
PH meters and waterproof pen ph tester, inutra-wand T.D.S meters, mini ec, cf, ppm, ppt, us/cm, ms/cm and waterproof pen ec ms/cm, ppm, tds, us/cm testers, ph combined electrode, oxygen (do), conductivity & orp electrodes and accessories.
Auto diagnostic tool. Auto scanner.Car tools.
Auto diagnostic tools, auto electronics.
Alternator, genset, AVR, ATS, controller, battery charger, governor actuator, solenoid.
Seamless steel, aluminum gas cylinder, brass valve, vibration tester.
Hardness tester, ultrasonic thickness tester, vibration tester, coating thickness tester, ultrasonic flaw detector, infrared thermometer, surface roughness tester.
Force gauge, thickness gauge, test machine, tester stand, shaw rubber sclero meter, vertical machine, horizontal machine, thermometer tester, torque tester, spring tester, clamp.
Latest smart-fit GJ3C TV LED backlight tester current voltage 0-320V adjustable laptop lamp light detection repair tool. Multipurpose GJ3C LED TV lamp backlight tester with high and low current gear, for LED backlight and components detection. Features: 1. It's used for inspection and repair of any size TV LED backlight without disassembling the LED. 2. Capacitance withstand voltage can be tested, test range: 0-200v. 3. It can test the voltage regulation value of the Zener diode, test range: 0-200v. 4. The voltage value of the lamp bead board can be tested to determine the quality of the lamp bead. 5. High and low current gear, the output voltage is 0-320V, a new low current gear is added for component detection, when the positive and negative LEDs are not confirmed, the low current gear can be used to test the positive and negative (safer), and then use the high current gear to detect. 6. Safe, smart, accurate, efficient. Specification: Input voltage: AC85-265V. Output voltage: DC0-320V Output current: 30mA (for TV testing). Output current: 1mA (for small components). Usage: 1. Please disconnect the power of the detected object first.(If you use it to test TV backlight,you should make sure the LCD screen is powered on.) 2. Plug in power, it can be used after 5 to 10 seconds to reach 320V. The soft start mode makes the backlight get brighter slowly. 3. Suggest using 1mA except the TV backlight testing. 4. Don't connect the probes to the LED for a long time if you can't determine the 5. Don't touch the output terminal of probes for a long time .It's safe to touch the probes in short time periods. Package list: 1 x LED LCD TV Backlight Tester. 2 x Table pen. 1 x User guide.
Product description The Transformer short circuit impedance tester comes with an adjustable power output. Regardless of single phase or three phase transformers, only one connection is required, and the instrument can complete the measurement of all winding pairs. The test and connection are simple. Main technical indicators and conditions of use Measurement accuracy voltage, current 0.2 level Power COS 0.1 0.5 grade, COS 0.1 1.0 grade Impedance COS 0.1 0.5 grade COS 0.1: 1.0 grade Voltage measurement range AC 3V 300V Internal power output range voltage 0 250V, current 0 10A Current measurement range AC 0.2A 20A Working temperature 10 50 Working humidity 0 80 Working power supply AC220V 10 50Hz 1Hz Dimensions 360mm 220mm 150mm Weight of the instrument 20Kg Transformer Short circuit Impedance Tester
Product description Current transformer field tester was developed with high-end testing technology, large-scale electronic circuit design and accord with national related protocol . It has solved the problem of big working intensity,trival operation while on-site test of current transformer, voltage transformer. Meanwhile the product has a reliable performance,and the function is strong. Technical index
Product description Anti Emulsification performance automatic tester meets the requirement of GBT 7305-87 and GBT 7605-87, which adopts 32-bit high-performance microprocessor, high definition color touch screen and digital PID control algorithm to achieve high accuracy of temperature control, good repeatability, automatic lifting of stirrer, simultaneous test of four samples, smart storage and convenient check of test result. Technical index Temperature measurement Platinum resistance Water bath temperature 54 Room temperature 100 can be set arbitrarily Control accuracy 0.1 Stirring speed 1500 15 rmin Number of cylinders 4 Self-check function Stirring device lifting and rotating Display High definition color touch screen Power supply AC 220V 22V Power 1800VA Frequency 50Hz 2.5Hz Ambient temperature 10 35 Ambient humidity 85 Weight about 24kg Profile size 358mm 302mm 858mm Anti-emulsification performance automatic tester
Testing equipment.Selling and transportation
