Rapid Temperature Change Test Chamber description: Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It is the aviation, automobiles, home appliances, research and other fields necessary test equipment. Rapid temperature change test chamber advantages: 1.Can set the temperature variable rate of the different stress screening 2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. 3.Meet the requirements of stress screening test for electronic equipment 4.Switching temperatstress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions 6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC. 7.Can carry out the two test methods, temperature test and average temperature test 8.With aluminum sheet test machine load capacity (non plastic load) 9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc. 10.Can screen the sample load with a large number 11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program) 12.Complete real-time test curve analysis shows that no time limit 13.Can be integrated with the E management system to monitor the management system 14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching. Rapid temperature change test chamber accessories: 1.Standard equipment Test product load power supply 3 groups Each side of the left and right side has a 50mm Pin hole Pin hole silicone plug 2 PCS Stainless steel sample holder 2 PCS 20L water storage tank 1 PCS Pure water filter 1 PCS
Temperature and Humidity Test Chamber Basic introduction: Environmental test chamberr/constant temperature and humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed. Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement. Six advantages of Sanwood Temperature and Humidity Test Chamber: 1.Evaporator no frosting under longtime Low temperature and low humidity running. 2.Automatic control system refrigerant demand save electricity above 30% 3.High heat load tested samples test environment 4.realize 95 95%high temperature and high humidity environment. 5.10% 20 ultra-low temperature range control ability 6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
High and low temperature explosion-proof test chamberStructure and Characteristics: 1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system. 2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying. 3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber. 4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function. 5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water. 6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts. 7.Input mode PT100 sensor. 8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate. 9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber. 10.With larger transparent viewing window and lighting inside to observe the test. 11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions. 12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement. 13.With various of safety protection device such as leakage and outage protection,compressor over pressure protection,overload fusing protection,audio signal alarm.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Scope Standards: gb/t 2361 and astm d1748 It is widely used in pharmaceutical, textile, food processing, bio-engineering experiments and industrial products of the temperature and humidity testing. Features 1. Mirror stainless steel liner, surrounded is designed and made as per semicircular easy to clean, inside adjustable shelf spacing; 2. The use of double doors, insulation performance is good. Interior doors is use full glass door, open the outer door, observing the situation does not affect the internal temperature inside; 3. High-precision, high-capacity humidity generator. Ensure humidity control occurs, high precision, small fluctuations; 4. The original french “taikang” closed compressor, configure delay start. High and low pressure multiple protection. Technical parameters 1. Dimensions: mm (depth × width × height) in order to prevail in kind 2. Room size: 400 × 400 × 500mm (depth × width × height) 3. Measuring range: 10 °c~ 85 °c (determined according to customer requirements) 4. The temperature fluctuation: ± 1 °c (no load) 5. The temperature uniformity: ± 2 °c (no load) 6. Humidity control range: 40 ~ 95% rh (no load) 7. Heating method rate: 3 ~ 4 °c/ min (no load) 8. Humidity fluctuation: ± 5% rh 9. The noise (db): 65 10. Power supply: 220v ± 10%, 50hz ± 1 ground wire, protective earth resistance of less than 4o 11. The total power: 1.8kw
- Material : Stainless Steel Core, Polyethylene Yarn, Span Yarn - Number of Stitiches : 10 Gauge - Length : 14 inch - Cut Level : 5 - Color : Gray, Black, White - Packing : 1pair/individual packing (1pack=5pair, 1box=200pair) - Origin : Made in South Korea - Purpose : Cut Resistant
E the internal temperature effectively. 4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable. 5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a 6. Lcd display screen, capable of displaying the measured value as well as the set value and time. 7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity. 8. casters are provided for ease of mobility, with strong positioning screws. Vices: fuse free switch, overloading protection switch for compressor, high and Wooden case
Application :- This is a premium product of electrical wires from \'JPCL\'. These cables are ideal for wiring in residential and commercial complexes, high-rise buildings, hotels, hospitals, schools, colleges, etc. (where the density of people is high). During a fire, these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside to escape safely. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house only. The insulation is far superior in terms of critical oxygen and temperature index as well as in light transmission and acid gas generation. The skin coloration offers high insulation resistance and long life. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.75, 1.00, 1.50, 2.50, 4.00 and 6.00 Sq. mm Color Codes : Red, Yellow, Blue, Black and Green (For Earthing) Specification : IS:694 Packing : In 90 meter coils in attractive cartons
Application :- These multi core flexible cables are used for wiring in control panels, machines and various electrical installations in dry and damp interiors specially under typical industrial environmental conditions. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables offer low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from oils, greases and various chemicals and abrasions, thereby giving long life and electrical safety. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 4.00 Sq. mm in 2 core to 19 cores & 6.00 to 120.00 Sq. mm in 3 core and 4 core. Color Codes : Black and Grey Outer Sheath 2 Core Cables - Red, Black 3 Core Cables - Red, Black & Green (for Earth) 4 Core Cables - Red, Yellow, Blue & Green (for Earth) 5 Core Cables - Red, Yellow, Blue, Black & Grey Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
