Suitable for hps bulb of america and europe standard
Input voltage: 100-265vac (120v/240v)
Output frequency: 30khz, 20khz(1000w)
Input frequency: 50/60hz
Power factor: .98
Thd:<10% cf: <1.7
Usage temperature: -40 to 65c
Dimmable: 50% - 100%
Prolong lamp life at least 10%
Prolong lamp life at least 10%
Energy-saving up to 30% compared with magnetic ballast
Smaller size, lighter weight, 30% lighter than the magnetic ballast
Guarantee 3 years' warranty and 6 years' design life.
Constant wattage output ballast noise rated class a
CE, FCC, UL, CUL, ROHS are approved
Wide input voltage, constant power output, prolonging life span of bulb
Perfect protection function: open circuit and short circuit protection functions available.
Soft starting.
Standard export cartons and wooden with good protection
Ranges from 18W, 26W, 35W, 55W, 66W, 90W, 91W, 135W etc and the LAX series of electronic ballasts for Low Pressure Sodium lamp developed by leianxun company adopt the SCM CPU digital technique. It insures the intellectual protection of electronic ballasts---keeping the safety of ballasts and the system , when the voltage output terminal is abnormal. In the process of warm-up, triggering, and ignition, the CPU can reach the best state to protect the electrode of lamp /tubes. This is measured by the microsecond controlling span of system and the height of impulse from the trigger voltage. Thus it doubles the longevity of the electrode for lamp tubes greatly.
It is perfect for solar power of street lighting.
152 Electronic Ballast Suppliers
Short on time? Let Electronic Ballast sellers contact you.
Features:
1.Metal Halide without exhaust pipe can replace G12 traditional metal halide and can be used in place of commercial lighting, home lighitng and other occasions
2.The advancement of no exhaust pipe structure ensures the consistence of color temperature
3.Higher luminous efficacy and longer life than traditional metal halide
4.Close to CRI of CDM, superior cost-effective.
Usage:
1.It must use with compatible magnetic ballast or ignitor and electronic ballast
2.Recommend to use with electronic ballast to extend lamp life, increase system efficency and prevent stobe flash
3.It must use other grade ballast if the voltage is ofen more than 3% of rated voltage
4.It must use a strong current protection device(IEC61167)
5.Suitable for closed(hard glas front cover)fixtures.
The ultra thinnest ballast
ROHS and E-MARK 13 Certification
Endure 125 degree
All of best electrical parts
Germany technology
1) Input voltage range : 9V~16V
2) Rated voltage : 13.2V
3) Cold light up current : 6.4A
4) Hot light up current : 4.3A
4) Max. start voltage : 23kV
5) Input current : 3.2A
6) Output power : 40.2W
7) Working temperature : -40~125¿¬pC
8) Size : 5.6cm*5.6cm*0.8cm
The ultra thinnest ballast
ROHS and E-MARK 13 Certification
Endure 125 degree
All of best electrical parts
Germany technology
1) Input voltage range : 9V~16V
2) Rated voltage : 13.2V
3) Cold light up current : 6.4A
4) Hot light up current : 4.3A
4) Max. start voltage : 23kV
5) Input current : 3.2A
6) Output power : 40.2W
7) Working temperature : -40~125¿¬pC
8) Size : 5.6cm*5.6cm*0.8cm
Electronic ballast for uhp-projector lighting reources
Electronic ballast for metal halide lamps
Electronic ballast for stage light hid
Varieties of electronic ballast for your choosing
Fl 2x35/220-240v t5 dim-a
Dimming range from 1-100%
Lamp start at 1% possible
Standard dc1-10v control interface
(en60929 with earth leakage 0.5ma)
Defined lamp friendly warm start within
1.5 s with ac and 0.6s with dc
Dc operation in emergency lighting
Installations to vde0108
Safe shutdown of defective lamps
Safe shutdown of lamps at end of life
Automatic restart after lamp replacement
Operating frequency ~40-120khz
1)power voltage: 220v
2)power requency: 50-60hz
3)power actor: 0.98
4)coecient: 0.95
5)thd: n15%
6)c: n1.7
8)speciications: 1 x 18w, 2 x 18w, 3 x 18w, 1 x 30w, 2 x
30w, 3 x 30w, 1 x 36w, 2 x 36w, 3 x 36w, 1 x 58w, 2x58w, etc
9) metal housing
We can manuacture dierent sizes and speciications o
Electronic ballasts according to customers' request.
1) power voltage: 220v
2) power frequency: 50-60hz
3) power factor: 0.98
4) coeffcient: 0.99
5) thd: n15%
6) cf: n1.7
8) specifications: 1 x 24w, 2 x 24w, 3 x 24w, 1 x 36w, 2 x
3 6w, 3 x 36w, 1 x 40w, 2 x 40w, 1 x 55w, 2 x 55w
