The 640 addressable audio/visual alarm devices are suitable for connection to 2-wire addressable fire detection And alarm systems. 640 is loop-powered and activation is initiated by a dedicated initiation message from the control and indicating Equipment. Up to 125 devices can be connected to each alarm zone loop. Visual, audible and audio/visual models available Red or white body available for audible alarm device Loop-powered from control and indicating equipment Operates when a dedicated activation message is received from the control and indicating equipment Loud sounder output of 85 db at 1 m Long-life leds Low quiescent current Dip switch address setting
The 640 addressable audio/visual alarm devices are suitable for connection to 2-wire addressable fire detection And alarm systems. 640 is loop-powered and activation is initiated by a dedicated initiation message from the control and indicating Equipment. Up to 125 devices can be connected to each alarm zone loop. Visual, audible and audio/visual models available Red or white body available for audible alarm device Loop-powered from control and indicating equipment Operates when a dedicated activation message is received from the control and indicating equipment Loud sounder output of 85 db at 1 m Long-life leds Low quiescent current Dip switch address setting
Snc-300 non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection To 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection Control and indicating equipment that can accept non-addressable type detectors. Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor Provide early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive Rate-of-rise operation or fixed-temperature operation when the response threshold value is exceeded. Photoelectric smoke and heat sensors Analogue detection discrimination Dual leds for 360° visibility 2-wire and 4-wire models for dc 12 v and dc 24 v operation 4-wire model for dc 48 v operation 4-wire models available with a n/o alarm relay output 4-wire models available with auto-reset 2-wire models available with remote led output Connects to zone monitor for use with addressable control and indicating equipment
The 460 manual call points includes a pressure-activated displacement element to provide a safe and convenient Way for building occupants to manually initiate a fire alarm condition. Resetting the manual call point is achieved by inserting a key through the underside of the unit to replace the Operating face to the quiescent position. Pressure activated displacement element provides a safe user experience Integral indicator to show polling and alarm activation Resettable with simple key operation Suitable for indoor use Monitors for quiescent, alarm and fault conditions
The 442 audio/visual alarm devices are suitable for connection to 2-wire and 4-wire fire detection and alarm Systems. 441 will operate with both addressable and non-addressable fire detection control and indicating equipment. Activation is initiated upon connection of the operating voltage, allowing connection to either a switched supply or Via an addressable module. Visual, audible and audio/visual models available Red or white body available for audible alarm device Operates when the supply voltage is connected to the device Compatible with relay outputs from control and indicating equipment, or from an output module connected to addressable alarm circuit wiring Dc 24 v operation Loud sounder output of 85 db at 1 m Long-life leds Zero current load in quiescent condition
The 442 audio/visual alarm devices are suitable for connection to 2-wire and 4-wire fire detection and alarm systems. 441 will operate with both addressable and non-addressable fire detection control and indicating equipment. Activation is initiated upon connection of the operating voltage, allowing connection to either a switched supply or via An addressable module. Visual, audible and audio/visual models available Red or white body available for audible alarm device Operates when the supply voltage is connected to the device Compatible with relay outputs from control and indicating equipment, or from an output module connected to addressable alarm circuit wiring Dc 24 v operation Loud sounder output of 85 db at 1 m Long-life leds Zero current load in quiescent condition
Snd-500 dc smoke alarms provide battery powered smoke detection and alarm functions within a single unit. Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire And high immunity against unwanted alarms. Snd-500 dc smoke alarms are battery powered, do not require a mains supply, and are suitable for general Residential applications. Photoelectric smoke sensor Integrated indicator provides visual indication of an alarm condition Test button verifies battery and alarm operation Loud 85 db sounder to alert occupants Single dc 9 v user-replaceable battery provides up to 18 months operation under normal conditions 30 day low battery warning signal Interconnection function available to connect up to 38 units together Battery missing indicator
The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be connected To non-addressable devices when used with addressable input modules. Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile Cause-and-effect pc-based programming tool enables rapid customization with software for sites that Require special operating features. The 6001 comes standard with features that allows flexibility and expandability. Single loop or 2-loop options available Single loop, expandable to 2-loops available Networkable, up to 4 control panels Up to 125 addressable devices per loop Automatic device detection on start-up Automatic device type-code verification 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output Backlit lcd display providing 4 rows of 40 characters 16 zone fire alarm led indicators 3000 event history log
The 4001 non-addressable control and indicating equipment forms the central part of a fire detection and alarm System. The 2-wire 4001 is compatible with numens non-addressable devices The 4001 comes standard with features that allows flexibility and expandability. Default configuration programming Facilitates out-of-box installation and rapid commissioning. 2, 4, 8, or 16 detection zones Up to 32 non-addressable devices per alarm zone circuit Configurable non-latching alarm zones, alarm dependency (zone coincidence detection), and output delay timer 3 access levels Single-person test mode Day/night mode Manual activation of audio/visual alarm devices Supervised auxiliary dc 24 v output 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output 3 voltage-free inputs for remote reset, evacuation start/stop, and day/night mode Supports up to 7 repeater panels
The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be Connected to non-addressable devices when used with addressable input modules. Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile Cause-and-effect pc-based programming tool enables rapid customization with software for sites that require Special operating features. The 6001 comes standard with features that allows flexibility and expandability. Single loop or 2-loop options available Single loop, expandable to 2-loops available Networkable, up to 4 control panels Up to 125 addressable devices per loop Automatic device detection on start-up Automatic device type-code verification 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output Backlit lcd display providing 4 rows of 40 characters 16 zone fire alarm led indicators 3000 event history log
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional 8 wired guarding zones for connecting wired sensors, 1 x relay outputs, can control home appliances remotely through the relay output;40 wireless guarding zones; Sms 5 phones automatically while alarming Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. Digital inputs are adopted opti cal-coupled isolators, which can prevent external high voltage from destroying internal. Arm/disarm and program the system by phone & sms Record function: maximum recording time:1 minute Tamper device: arming while the control panel removing or shaking. With standby rechargeable battery. The host automatically stores system status, while its power is off. Packaging weight: 1.3kg Packaging dimension: 290(l)*270(w)* 85(h) mm Standard package included:bl-5000 mainframe x1?remote controller x2?wired mini siren x1?wireless digital keypad x1?ac adaptorx1?user manual x1;
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm. Send sms to 6 preset mobile phone numbers automatically while alarming. Auto-dial 2 preset phone numbers and monitor the alarm site while alarming. Can connect line-cut/movement/vibration sensors etc., it will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Packaging weight: 3.8kg Packaging dimension: 300(l)*138(w)*235(h) mm Standard package included:bl-3000 mainframe x1?wireless digital keypad x1?user manual x1;
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Send mms to user’s phone Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm Call and sms several phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. It will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Packaging weight: 4kg Packaging dimension: 300(l)*138(w)*235(h) mm Standard package included:bl-3030 mainframe x1?wireless digital keypad x1?camera x1?user manual x1
Support 3g/wcdma frequency With 300k pixels cmos sensor. Built in ir red, support wireless video surveillance 24 hours. Built-in pan/tilt, horizontally 270°, vertically 90°, Support sd card(max 32gb) Arm/disarm and emergency alarm by remote controller Excellent wide dynamic function, wdr=100db Control program the system(like set language) by sms commands. Sms, mms, call and video phone automatically while alarming Support magic rotation 88wireless guarding zones, wireless alarm sensors inputs(315mhz or 433mhz) Send sms and call to 10 mobile phones automatically while alarming. Adopts wireless signal transmission, no need to connect to wire and easy for installation. Support motion detecting and video call anywhere and anytime.
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional With color lcd show screen and keyboard on the host. 88wireless guarding zones (learning code), 6 wired guarding zones/ 40 wireless guarding zones(fixed code), 6 wired zones optional App supported White/black optional Send sms and call to 5 mobile phones automatically while alarming. Talkback function: can speak with field person. Record function: maximum recording time:20s Timing arm/disarm function. Arm/disarm and program the system by control keyboard on the mainframe & phone & sms & remote controller With standby rechargeable battery. The host automatically stores system status, while its power is off. Packaging weight: 1.3kg Packaging dimension: 290(l)*270(w)* 85(h) mm
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Send mms to user’s phone Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm Call and sms several phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. It will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc.
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional With camera & pir itself Can send mms to your mobile phone. Can send picture to your e-mail. Can match wireless detectors/sensors with mainframe by learning code. Ir thermo image monitoring and detection for moving objects, the double detection technology can eliminate the false alarm caused by environmental reasons. With ir night vision camera, it provides full time 24 hours day and night monitoring function. 16 wired guarding zones(8 input, 8 output), 11 wireless guarding zones? Arm/disarm/partial arm by remote controller or sms. Auto-dial 1 preset phone numbers of alarm center.
Support 3g/wcdma frequency With 300k pixels cmos sensor. Built in ir red, support wireless video surveillance 24 hours. Built-in pan/tilt, horizontally 270°, vertically 90°, Support sd card(max 32gb) arm/disarm and emergency alarm by remote controller Excellent wide dynamic function, wdr=100db Control program the system(like set language) by sms commands. Sms, mms, call and video phone automatically while alarming Support magic rotation 88 wireless guarding zones, wireless alarm sensors inputs(315mhz or 433mhz) Send sms and call to 10 mobile phones automatically while alarming. Adopts wireless signal transmission, no need to connect to wire and easy for installation. Support motion detecting and video call anywhere and anytime.
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
