Electric testing machine.
Optional accessories Cable port: two size of cable port is available: diameter: 50mm, diameter:100mm. Double door Pass room: provided to avoid disturbance of atmospheric temperature and humidity while opening the door. Floor reinforcement: can be fixed if heavy specimen placed in the chamber for test. Carry-in inclined platform: provided below the door to facilitate moving of specimens in and out through the door. normal running, a malfunction running or stand by occurs. Water purifier
Standard configuration Sight window*1, cable port(port diameter: 50mm)*1, shelves*2, chamber lamp*1, power cable *2m No fuse breaker, over pressure¡¢over heat and over current protection for compressor, Over temperature protection, over load protect of blower, dry heat protection A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door. Dehumidifier The rotation regenerating dehumidifier m-120 ensures precise control of low humidity (5¨¬c 5%rh) for electrostatic reliability tests. Temperature and humidity recorder -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 2 pen Temperature 1 pen and humidity 1 pen. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 6 dots Temperature 3 dots and humidity 1 dot. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 180mm and 12 dots Temperature 6 dots and humidity 6 dots.
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre DTM Series Digital Tension Meter Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire, strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre DTM Series Digital Tension Meter Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire, strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
(TL-101) Digital manometer measures gauge/differential pressure from -55H2O to +55H2O(2 psi) It features 11 selectable units of measure: in H2O, pis, bar,mbar,Kpa,inHg,mmHg,ozin2,ftH2O,kgcm, additional features include data hold and auto power off disabled,careful use of this meter will provide years of reliable service. Features: 1.Max / minimum / average, and with a relative time 2.Large LCD backlit dual display 3.Zeroing, offset, and data compensation 4.Low battery display and automatic shutdown 5.Data Hold and Error code 6.9Vbattery 7.Client can calibrate the meter by oneself Specifications: 1.Pressure Range:+/-5psi(TL-101) 2.Accuracy:+0.3% FSO (at 25oC) 3.Repeatability: +0.2% (Max+0.5%FSO) 4.Linearity/Hysteresis:+0.29% FSO 5.Response Time:0.5Seconds Typical 6.Over Range Indicator:Hi 7.Under Range Indicator:Lo 8.Operating Conditions:0 to 50oC(32 to 122oF) 9.Storage Conditions:-10 to 60oC (14 to 140oF) 10.11 Selectable units of Measure 11.Max / minimum / average, and with a relative time 12.Large LCD backlit dual display 13.Zeroing, offset, and data compensation 14.Low battery display and automatic shutdown 15.Data Hold and Error code 16.9Vbattery 17.Client can calibrate the meter by oneself OEM is acceptable CE and ROHS are approved Lowest shipping cost could be provided 53X31X36CM/carton 37pcs/carton 10KGS/carton
Features: 1.Light,temperature and humdity measurement 2.Lux and Fc unit switchable 3.Celsius and Fahrenheit switchable 4.Auto range 5.Large LCD with Backlight 6.Data Hold Function 7.Min/Max/Avg Function 8.Detachable Sensor 9.Low Power Consumption Specifications: Light measure range: 0.1 to 200,000 Lux(Fc switchable) Accuracy:¡¨¤4%(0.1 to 10,000Lux);¡¨¤10% above 10,000Lux Resolution:1 Lux/0.1FC Sampling:0.5sec Temperature range:-10~50oC(14 to 122oF) Accuracy:¡¨¤1oC/¡¨¤1oF Humidity range:20%~90%RH Accuracy:¡¨¤5% Operation temperature:0 to 50oC(32 to 122oF) Operation humidity:10 to 90%RH Storage temperature: -10 to 60oC(14 to 140oF) Storage humidity:10 to 75%RH Size:220*55*35mm Weight:220g(included 9V battery) 53X31X36CM/CARTON 30PCS/CARTON 10.72kgs/CARTON
Introduce Temperature and Humidity Test Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, it is suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, printing, packaging, etc. Featurers 1)The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line. 2)Available in Chinese and English LCD touch screen, easy operation and program. 3)Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly. 4)The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity. 5)The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate. 6)Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Introduction Competitive Price Constant Climatic Walk in Chamber used to test various types of materials for their tolerances under condition of heat, cold, dry, humidity. Application: For all types of electronic products quality inspection , electric appliance, andcommunication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries products. Model BRS Series ( 4m~120m specified by user ) Temp-range A:-20~+150, B:-40~+150, C:-70~+150 Humid-range 20% R.H ~98% R.H ( Can specified low temp and low humid ) Temp. Accuracy 0.5 Humid. Accuracy 3%R.H Heating and cooling speed 5/min, 10/min, 15/min (Standard load 5~30Kg Aluminum Ingot ) Interior material Stainless steel SUS304 (mirror) Exterior material Spray-paint zinc plating steel panel Thermal Insulation material Hard polyfoam+ glass fiber Cooling system Cooling by Bitzer semi hermetic compressor Accessories Observation window( double tempered glass), Double-door:0.8x1.8M,Anti-explosion light, Interior LED lighting, control box 1set Safety device Switch, Over voltage protection, over heat protection, over current protection over temperature protection and water-lacking protection for Compressor. More Products Features 1.Used in various rang of temperature and humidity environment,can meet different testing requirements.Adopting BTHC uniqe control method, with safety and accurate temperature and humidity environment. 2.Equipped with high precision digital display temperature and humidity controller 3.Refrigeration circuit performation controlled by temperature setting value automatically,capable of starting up condenser under high temperature,direct cooling. 4.With wide view glass window,easy to observe the testing process. 5.Protection system: Electrical breaker,overheat protection,phase absence protection,water shortage alarm.
ALTITUDE TEST CHAMBER Altitude test chambers combine temperature and altitude with optional humidity for simultaneous environment testing. Features External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of heating, refrigerating system. Adopts international brand of imported parts for cooling system to improve operation reliability High precision and stable performance with touch screen controller, friendly Man-Machine interface. Multiple layers of safety device to easy maintenance. Standards Implement and Met GB11159-89 GB10590-89 GB15091-89 GB/T2423.25-1992 GB/T2423.26-1992 GJB150.0-86 Specifications 1. Dedicatetouch and excellent user experience 2. Unique and compact design, top grade appearance, stable performance and easy operation 3. Can simulate a wide rang of temperature and humidity environments 4. Capable of testing large components, assemblies, and finished products 5. Customized sizes and configurations available 6. One year warranties
Uv drying machine, industrial hot air oven, high temperature oven, led photoelectric oven, oven for pcb, oven for fpc, infrared drying machine, tunnel oven for lcd, touch screen and pharmacy, vacuum drying machine, drying machine for solid and stacked capacitor, drying machine for food and agriculture product, nitrogen drying, moisture proof drying machine, high and low temperature testing equipment.
Environment test equipment, programmable temp. And humidity chamber.
Environmental test chamber, test chamber, salt spray test chamber, temperature humidity test chamber, thermal shock test chamber, temperature test chamber, high and low temperature test chamber, ip grade test equipment, battery test equipment, dry oven, battery short circuit tester.
Testing Instruments And Scanners.
Electric meter and soil testing.Inspection
Tensile testing machines; drop testing machine; carton compression testing machine; simulated transportation vibration table; universal material testing machine; wire bending testing machine;� rupture strength testing machine; insertion and extraction force testing machine; wear resistance testing machine; ring compression strength testing machine; key load testing machine; ventilation type aging test chamber;� constant temperature and humidity test chamber; high and low temperature impact test chamber; salt spray test chamber; falling ball impact testing machine;� walk in constant temperature and humidity room; high and low temperature alternating humidity and heat test chamber; carton punching testing machine, etc; interlayer peel strength testing machine;.
Temperature controllers, timer, counter, frequency, tacholines, speedometer, voltage/current meter, power meter, adjustor and proximity sensors.
Environmental test chamber,furniture testing equipment series,impact collision testing machine.
High/low temperature extremes, humidity conditions, altitude, vibration, salt spray and package testing, furniture testing, electronic and electrical product testing, tape and rubber testing.Manufacturer, agency or distributor, research & development
Industrial robots, audio testing equipment, visual solutions, lithium battery pack automation production line, dispensing robot, screwdriver machine.
