P90B Explosion Proof Scraper Bucket Loader Keyword: scraper loader, scraper bucket loader, explosion proof scraper loader Introduction of P90B Explosion Proof Scraper Bucket Loader P90B Explosion Proof Scraper Bucket Loader is with high efficiency, compact structure, wide range of applications and so on. For roadway excavation, mucking with the tramcar. Not only below 30 °uphill, downhill roadway loaded rock, boring process parallel operations, improving. Main Characteristics of P90B Explosion Proof Scraper Bucket Loader 1.Hhigh efficiency, simple structure 2.Good reliability, wide application range 3.Coal mine, rock scraper loader for mining, tunnel. Figure Parameter of P90B Explosion Proof Scraper Bucket Loader ModelP90B scraper bucket volume (m³)0.9 Production Capacity (m³/h)95-140 Rail Gauge (mm)600/900 Wire rope pulling force (KN)31-50 Wire Rope Diameter (mm)17 MotorPower (kw)YBB45-4A 45KW voltage (V)380/660 Overall size (mm)Length8610 Width2050 Height2745 Weight (kg)9800
china coal0001 P-15B Tunnel Scraper Loader Keyword: scraper loader, tunnel scraper loader Introduction of P-15B Tunnel Scraper Loader P-15B Tunnel Scraper Loader is widely used for small coal mines and mining area of roadway with MGC1.1 fixed box type mine car or skip loading rock, coal rock with suitable height greater than 1.9 meters, the net section is 4.5 meters above the roadway. P-15B Tunnel Scraper Loader also can be used in coal rock or rock roadway, which can be used for drift can also be used on the downhill driving face rock loading, such as adding a tail wheel two, can be carried out on rock tunneling processes between parallel operation in the corners of roadway. P-15B Tunnel Scraper Loader can be used not only in the drift, but also in the angle of less than 30 degrees inclined or turning and turning angle to 90 degrees in the roadway, and for the parallel operation of driving procedures, improve the driving speed. Structural Characteristics of P-15B Tunnel Scraper Loader P-15B Tunnel Scraper Loader has the characteristics of high production efficiency, simple structure, convenient operation and so on. Electrical equipment of P-15B type scraper loader (including motor), button switch, magnetic starter, lights can use flameproof type, can be used in the mine gas and dust in danger. P-15B Tunnel Scraper Loader is mainly composed of a fixed wedge and tail wheel, scraper bucket, transmission (including operating mechanism, trolley, winch), a guide wheel and a trough (feeding groove, groove, middle unload groove) main parts and electrical parts etc. Technical Parameters of P-15B Tunnel Scraper Loader ModelP15B scraper bucket volume (m³)0.15 Production Capacity (m³/h)15-25 Rail Gauge (mm)600 Wire rope pulling force (KN)7.2-10.4 Wire Rope Diameter (mm)12.5 MotorPower (kw)YBB11-4 11KW voltage (V)380/660 Overall size (mm)Length5500 Width1170 Height1800 Weight (kg)2500
P Series Scraper Rock Loader Keyword: scraper loader, scraper bucket loader, scraper rock loader Introduction of P Series Scraper Rock Loader P series rake bucket rocker used in a variety of metal ore, nonmetallic ore, coal mine, railway culverts, water conservancy and other construction projects, can work at the roadway with a tub or skip to rock. It can be used not only in the alley, but also in the inclined angle of less than 30 degrees of the inclined road or turn angle and turn angle of 90 degrees in the use of roadway, also at the same time the parallel operation of the tunneling work to improve the tunneling speed. Electrical equipment with explosion-proof performance, can be used for coal dust and gas in the mine. P-type rake bucket rock loader of the basic parameters: P-15B rake bucket rock loader used in high more than 2 meters (4.5 cross - section) of the roadway. P-30B rake bucket rock loader used in the net height of more than 2 meters (net cross-section above 6 square meters) of the roadway. P-60B rake bucket rock loader used in the net height of more than 2.4 meters (net section above 8 square meters) of the roadway. P-90B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 12 square meters) of the roadway. P-120B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 16 square meters) of the roadway. Technical Parameters of P Series Scraper Rock Loader Model P15B (A) P30B(A) P60B P90B P120B P150B scraper bucket volume (m3)0.15 0.3 0.6 0.9 1.2 1.5 Production Capacity (m3/h 15-25 35-5070-10095-140120-180150-220 Rail Gauge (mm) 600 600/900600/900600/900600/900/15001500 Wire rope pulling force (KN)7.2-10.412.3-18.520-2831-5037-5552-72
This is lola from beijing ocepo construction machinery ltd., The factory of rebar coupler for 20 years, also rebar threading machine etc steel machines, Professional skill and competitive price , If you have any need, hope i could do your a favor. Thanks and regards, Lola.
AGS-40C Rebar Thread Rolling Machine process 14-40mm rebars, thread length grt to 120mm. 1. Roll thread not cut thread, so could protect the highest tensile strength of parent metal. It meets requirements in JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc. 2. Easy to operate. Automatic opening-closing mechanism for rib peeling device, need only 30 seconds to finish a threaded end. 3. Peel ribs and roll threads by the same machine, so could save labor and improve productivity. 4. Widely used. Be able to process rebar diameter 16-40mm 5. Environment-friendly, safe, no environment and weather restrictions. 6. Economic, low investment for the equipment
Features and advantages of high manganese cone crusher spare and wearing parts bowl liner, concave and mantle mn22cr2, mn18cr2, mn13cr2 1) material: high manganese steel: mn13%, mn14%, mn18%, mn20%, mn24% high chromium iron: cr20, cr24 up carbon steel ht200 qt400-15 2) use: machinery in metal recovery smash, mine, metallurgy, chemical industry, cement, petroleum etc. 3) production quality testing: high frequency infrared carbon & sulfur analyzer, metallographic microscope, machinery performance testing equipment, hardness testing equipment, ultrasonic inspection equipment 4) easy installation: the anti-abrasion block is a semi-permanent part, which is easy for replacement. 5) certificate iso9001:2008 and casting experience over 10years. 6) factory: over 8000square meters and more than 100 workers
Please to offer you this Original TADANO 25T crane, 4 section booms 32m length Mitsubishi Carrier and Engine two hooks 100% original parts from japan. good working condition RORO ship or Cargo ship
Used excavator of Hitachi EX60-2,1994/3.
Used Wheel Loader of KAWASAKI KLD90Z,1996Y.
With the portable crushing plants, you can build a fully mobile and Independent mobile process for your needs.With the aim of solving Supply problems in large infrastructure project located at a long distance From aggregate production centres, or as a production complement for These projects.For contracting, quarrying and in-pit crushing applications, Sanyyo's mining and construction technology offers a wide range of Proven products. The packing details are changed according to different models.
Characteristics: 1, firm structure & high reliability; 2, large curshing ratio & large range of capacity available; 3, wedge setting adjustment to get different size products; 4, v sharp broken cavity, without dead zone; productive and efficient; 5, lubrication system, safe and reliable, convenient to maintenance; 6, can be used in stationary or semi-mobile installation; 7, special two sides double bearing system, this design can extend the life span Of the machine. According to actual product.
Product detailed introduction Working principleThe motor make the exciter eccentric producing high-speed rotation through the triangle belt .The operation of the eccentric produce great centrifugal force , exciting the screen box to do a certain amplitude circular motion .The materials on the sieve get the impulse from the screen box on the inclined screen surface to do continuous casting movement .During the process of encounter between materials and screen surface , the granule smaller than the sieve will go through the sieve to achieve classification. Main partsMotor, reducer, drum gear, frame, sealing cover Advantages1.No used of rubber ball clean- up device, prevent the materials from being polluted when the ball wear down gradually. 2.Simple structure, convenient installation and light weight; reliable operation, long lifeexpectancy;low electricity consumption. 3.To speed up the reunion and separation of content, thus increasing dry weight, reduce the number of large particles 4.Using roller conveying principle, small friction coefficient, wear light Application1.Quarry industry: suitable for screening and classifying gravel, clay, mountain meal, sand, etc. 2.Coal industry: suitable for screening and classifying lump coal, coal dust, coal washing, etc. 3.Chemical industry: fertilizer industry etc. 4.Mineral-selecting industry: suitable for grading and classifying lump, powder substance, etc. 5.Metallurgy, construction, building materials, abrasives, and other industries Technical parameters ModelDiameter(mm)Length of screen surface(mm)Capacity(m3/h)Power(kw) Dyt-600Ö600 1500-3000 or as requested, it is related to the sifting ratio of the material 1-53 Dyt-800Ö8001-103 Dyt-1000Ö100020-303 Dyt-1200Ö120020-503 Dyt-1500Ö150040-805.5 Dyt-1800Ö180080-1507.5 1pc/case
The body of machine is welded by steel plate and steel casting, stable performance and high concentricity of spindle, running steadily without building foundation Double safety device of mud pressing plate without any influence when the screw get broken and drop into mud cylinder Spindle and mud pressing plate dip in lubricating oil, intelligent control room direct air forever without plugging mud of trouble Super housings: siamese steel casting and weighs 150g, steel split-type, special design, the replacement of 1 to pay the higher level spiral time in 30 minutes
We can supply all kinds of machinery spare parts, pipe fitting especially the parts produced by casting, forging or stamping process. Our leading products are: Spare parts: weights, hand wheel, bracket. Bearing housing , bearing cap, drum, gear box, valve parts etc. Lift parts: pulley, support, cap etc. Auto parts: brake drum, hub, brake disc Pipe fittings: elbows, reducing outlet tees, con reducer, caps etc.
Heavy machine alarm 3T1815 1) product name: 3T1815 2) voice: 130 decibel 3) alarms 37 times in 60 seconds 4) unit can be ran at 130db. it comes standard with the selector bar in place. to have the unit sound at 112db, simply remove the bar from the back of the alarm 5) cross reference : John Deere #A301074 , John Deere #A331020 ( just remove bar from back of alarm neutral packing or your desired packing
scription of mortar production line: I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced. II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors. Models of mortar production line: Type Model Mixer/KW Capacity T/Need area/m*m FRQ: 1.How many kinds of mortar can this line produce? A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer. 2.How many person needed in this line? A: 3-5 workers will be enough to operate this line. 3.Is the line full-automatic? A: Yes,we can custom as your need. 4.Whats the difference between full-automatic line and semi-automatic line? A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not. (2)semi-automatic line may not need material silos,full-automatic line need. (3)Semi-automatic line is relatively cheaper than full-automatic line. 5. Is it including packing machine? A: Yes. 6. How many types of mortar production line is there? What¡¯s the difference? A:(1)Normally,three. Vertical type ,block type and workshop type. (2)Normally: vertical type:the height of this line is big more investment of steel supporting structure Block type: more factory area less steel supporting structure Workshop type: install in a workshop and the height should be low 7.What is factory area needed?. A: It depends on the line type. 20-200m*m will be enough 8.Is it only dry or can make wet also? A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture. 9.What¡¯s the total power consumption (KW)? A:It is about 50KW. It is widely depends on the capacity and number of raw materials. 10 What¡¯t the capacity of the line? A:2-50ton per hour. 11.What¡¯s the guarantee period? A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service. 12.Can you install in my country? A:Yes, we offer oversea installation service. 13:Can you teach us how to operate this line? A:Yes.We offer training service free of charge. 14:What¡¯s the delivery date? A:30 days. 15: Whats the payment term? A:TT and L/C. 16.Can you delivery to my port? A:Yes,no problem. 17:How can I inspect the line before shipment? A:You can inspect by yourself or you fine someone inspect for you. Materials for mortar: 1.Cementing material: cement, lime, plaster. 2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite. 3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc. 4.Water-retention and thickening material. 5.Chemical additives. Production process: 1.Raw material storage 2.Raw material convey and weigh 3.Addition and weighing of additive 4.materials mixing 5.finished mortar storage and packing 6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system Wood case
With dual shaft dispersers, two toothed dispersing discs, can mix material of various viscosity more efficient Normal
Specifications1.broad application2.10 years experiences in research3.professional manufacturer4.famous brand Model ,Host Power KW,Annual Capacity,Host Volume M3,Floor Space m2 LJWZ--05,7.5,0.54-1.8,0.5,20-100 LJWZ-10,11,1.08-3.6,1.0,20-100 LJWZ-20,18.5,2.16-7.2,2,20-100 LJWZ-25,19,2.7-9.0,2.5,20-100 LJWZ-30,22,3.24-10.8,3,20-100 normal
Laser source: two 635nm laser diodes; Laser safety class: Class 2M Accuracy: 1mm at 5m Self-leveling range: Operation time: ƒ15 hours for continuous operation Unit dimension: 90x59x89mm Weight: 195g
clay brick machine personalized rimer high output12000-25000 low power,energy-saving solid brick China professioal clay brick machine manufacturer, not only supply clay brick machinery but also turnkey project, we also have own brick factory, welcome you visit our brick machinery company and brick company!
