scription of mortar production line:
I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced.
II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors.
Models of mortar production line:
Type Model Mixer/KW Capacity T/Need area/m*m
FRQ:
1.How many kinds of mortar can this line produce?
A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer.
2.How many person needed in this line?
A: 3-5 workers will be enough to operate this line.
3.Is the line full-automatic?
A: Yes,we can custom as your need.
4.Whats the difference between full-automatic line and semi-automatic line?
A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not.
(2)semi-automatic line may not need material silos,full-automatic line need.
(3)Semi-automatic line is relatively cheaper than full-automatic line.
5. Is it including packing machine?
A: Yes.
6. How many types of mortar production line is there? What¡¯s the difference?
A:(1)Normally,three. Vertical type ,block type and workshop type.
(2)Normally: vertical type:the height of this line is big more investment of steel supporting structure
Block type: more factory area less steel supporting structure
Workshop type: install in a workshop and the height should be low
7.What is factory area needed?.
A: It depends on the line type. 20-200m*m will be enough
8.Is it only dry or can make wet also?
A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture.
9.What¡¯s the total power consumption (KW)?
A:It is about 50KW. It is widely depends on the capacity and number of raw materials.
10 What¡¯t the capacity of the line?
A:2-50ton per hour.
11.What¡¯s the guarantee period?
A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service.
12.Can you install in my country?
A:Yes, we offer oversea installation service.
13:Can you teach us how to operate this line?
A:Yes.We offer training service free of charge.
14:What¡¯s the delivery date?
A:30 days.
15: Whats the payment term?
A:TT and L/C.
16.Can you delivery to my port?
A:Yes,no problem.
17:How can I inspect the line before shipment?
A:You can inspect by yourself or you fine someone inspect for you.
Materials for mortar:
1.Cementing material: cement, lime, plaster.
2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite.
3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4.Water-retention and thickening material.
5.Chemical additives.
Production process:
1.Raw material storage
2.Raw material convey and weigh
3.Addition and weighing of additive
4.materials mixing
5.finished mortar storage and packing
6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system
Wood case
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Indian Granite Black: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Black Galaxy: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Coffee Brown: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes : Mirror, Matte, Flame finish etc. Slabs : Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles : 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Coral Gold: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Jasemine White: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite River White: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Sappahire Blue: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Silver Waves: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Steel Grey: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
