Food ingredients, animal feed raw materials, and chemicals used in many fields, including construction, petroleum, mining, agriculture, printing, rubber, detergent, etc.
.
Naphthalene Sulfonate Formaldehyde Condensate (SNF), also known as Poly Naphthalene Sulfonate (PNS) and Formaldehyde Sulfonate Condensate (FDN), is a highly effective water reducer and superplasticizer commonly used in the construction industry to improve the workability and strength of concrete.
It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc.
Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable.
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
969 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
Sodium Naphthalene Sulfonate Formaldehyde
This product, named -naphthalene sulfonate formaldehyde condensate, is non-air entraining superplasticizer. It has good
dispersing performance to the cement particles. Compared with traditional plasticizer, it has higher water reducing rate, and good for preparing mass concrete, fresh concrete required for early strength and high strength, and precast concrete and parts. It also has good adaptability to commonly used cement, and widely used in roads, bridges, dams, power engineering, civil construction, steam and natural curing precast parts and other projects.
Advantage:
* Higher water reducing rate. By the recommended dosage, the water reducingrate can reach 15% -20%.
* Improve the workability of concrete, such as compression, long-term strength, flowability, etc., and enhance the reinforcement of steel and concrete.
* Reduce costs. In the case of maintaining the same workability and strength, cement amountcan be reduced.
* Wide adaptability, cost-effective. Good adaptability to all kinds of cement, such as Portland cement, slag cement, volcanic ash cement, etc.
* Be mother material to formulate other admixtures.(like early strength, set retarder, pumping agent, antifreezing agent).
* High water reduction, low dosage. The water reducing rate can reach 20%-40% with recommended dosage.
* Early and high strength. The early strengthand 28 day strength have been obviously improved.
* Low slump loss: complywith the pumping agent standard, slump loss would besignificantly reduced.
* High durability: This product can effectively
reduce the W/C ratio, improve durability.
* It can be used as a mother liquor to produce other functional admixture, such as early strengthtype, retarder, pumpingconcrete admixture, antifreezer, etc.;
* Environmentalfriendly products: the production does not pollute the environment;
* Non-corrosionon steelbar.
1. Increasing productivity and improving quality in cement grinding process
2. Saving the production cost and time
3. Anti-coagulation and stable grinding ability
4. Increasing early and long term strength
5. Reduction of CO2 emission and energy cost.
1. Increasing productivity and improving quality in cement grinding process
2. Saving the production cost and time
3. Anti-coagulation and stable grinding ability
4. Increasing early and long term strength
5. Reduction of CO2 emission and energy cost.
Sodium naphthalene sulphonate fdn-
1 used for and widely for self-cured, vaporcured concrete and its formulations. At the early stage of
Application, extremely prominent effects are shown. As the result, the modulus and siteutilization
Can be drastically, the procedure of vapor cureis omitted in peak-heat summer days. Statistically
40-60 metric tons of coal willbe preserved when a metric ton of the material is consumed.
2 suitable for preparation of early-strength, high-strength, high-anti-filtration and selfsealing& pumpable concrete.
1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures.
2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters.
3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo.
4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials.
5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs.
Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc.
Sodium lignosulphonate used in the field of concrete additives, the sodium lignosulphonate series products can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. The products can be directly adopted as additive in the concrete .Moreover, they also can be compounded with such high-performance water reducing admixtures as naphthalene series and melamine series etc. And, they are also ideal materials for series retarding agents and pumping agents etc.
Sodium lignosulphonate in ceramic for ceramic products, can reduce the carbon content to increase green strength and reduce the amount of plastic clay, mud flows and good to improve the yield 70-90%, sintering speed reduction from 70 minutes to 40 minutes.
3. The sodium lignosulphonate series products can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters.
4. The sodium lignosulphonate series products can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo.
Application:
The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows
Plaster mortar
Skim coat
Grout mortars
Gypsum plaster.
1.Product description
Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents.
3.Properties
Tiones tm 6012e increases cohesion of binding material and improves performances of
Cement based products. It provides pre-mixed mortars with following advantages:
Improves workability
Improves adhesion strength
Improves flexural strength
4. Dosage and handling
Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application.
5.Storage
Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month.
1. Product specialty:
5100C is urea formaldehyde resin powder as binders special for woodworking processing. It owns high bonding strength, low formaldehyde content as well as ideal water resistance. This powder is suitable for the cold pressing and hot pressing project.
2. Performance index:
Item unit description
Powder:
Appearance -- white powder
Moisture content % 1~3
Volatile substance % <2.5
Bulk density kg/m3 500~800
Molar ratio (f/u) -- 1.55
Solution ( 60% content in water)
Ph value -- 8~9
Viscosity at 25 c cps 300~550
Curing time (2% nh4cl at 25 c) hour 3~6
Curing time (2% nh4cl at 100 c) second 55~80
3. Dissolving glue powder:
A) mixture ratio:
Item ratio( pbw)
Uf powder 100
Water 50~150
(according to actual situation)
B) dissolution method:
Put less than 30pbw of the total needed water into mixer, and then add uf powder in. Switch on the mixer with speed of 50~150 rotations / minute, after glue powder being completely dissolved, put the remained water in mixer gradually along with churning. Continue to agitate for further 3~5minutes until the glue solution is completely mixed together again.
C) the user could add hardener into the mixed liquid glue according to actual requirement, and control the active period of dissolved liquid glue.
4. Storage & note
A) storage life: 1 year under temperature lower than 30 c.
B) the goods should be stored in a dry, ventilated location. Avoid direct sunshine and moisture.
C) the package should be sealed again immediately once the pack has been opened to avoid moisture.
D) avoid contact with eyes. Once splashed into eyes, flushed out with plenty of clean water. Consults doctor if necessary.
1. Multi-ply paper bag with polyethylene liner.
2. 20kg/bag.
Application:
Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are:
Waterproof mortars
Waterproof wall putty (skim coat)
Concrete repair mortars
Tile grout
Non-shrinking grouting material
Powder paint
1. Product description:
Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents.
2. Specification:
Appearance---------------------------------------- white free-flowing powder
Protective colloid----------------------------------polyvinyl alcohol
Bulk density-----------------------------------------500 ± 100 g/l
Particle size-----------------------------------------max. 5% over 150μ m
Residue moisture----------------------------------≤ 2%
Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water)
Film properties------------------------------------opaque, high flexible
Mfft------------------------------------------------approx. 0° c
Tg ---------------------------------------------------(-5° c)
3. Properties:
Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages:
Outstanding water resistance
Improves flexibility
Improves workability
Excellent weatherability and durability
Prominent heat resistance
Reduces elastic modulus
4. Dosage and handling:
Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application.
20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Application:
5200f is suitable for the processing of plywood, particle board, MDF&HDF, multi-ply wood engineer flooring, surface veneering as well as the other wood production.
1. Product specialty:
5200f is melamine modified urea formaldehyde resin powder as binders special for woodworking processing. It owns higher bonding strength, lower formaldehyde content as well as ideal water resistance. This powder is suitable for hot pressing project.
2. Performance index:
Item unit description
Powder:
Appearance -- white powder
Moisture content % 1~3
Volatile substance % <1.0
Bulk density kg/m3 600~700
Molar ratio (f/u) -- 1.55
Solution ( 60% content in water)
Ph value -- 8~9
Viscosity at 25° c cps 300~550
Curing time (2% nh4cl at 25° c) hour 3~6
Curing time (2% nh4cl at 100° c) second 55~80
3. Dissolving glue powder:
A) mixture ratio:
Item ratio( pbw)
Uf powder 100
Water 50~150
(according to actual situation)
B) dissolution method:
Put less than 30pbw of the total needed water into mixer, and then add uf powder in. Switch on the mixer with speed of 50~150 rotations / minute, after glue powder being completely dissolved, put the remained water in mixer gradually along with churning. Continue to agitate for further 3~5minutes until the glue solution is completely mixed together again.
C) the user could add hardener into the mixed liquid glue according to actual requirement, and control the active period of dissolved liquid glue.
4. Storage & note:
A) Storage life: 1 year under temperature lower than 30 c.
B) the goods should be stored in a dry, ventilated location. Avoid direct sunshine and moisture.
C) the package should be sealed again immediately once the pack has been opened to avoid moisture.
D) avoid contact with eyes. Once splashed into eyes, flushed out with plenty of clean water.
1. Multi-ply paper bag with polyethylene liner.
2.20kg/bag.
969 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
