Card supported: mifare s50, mifare s70, ultralight, and mifare pro Pcd model: rc500 / rc531 / rc632 Power supply: dc 4.5v to 5.5v Max. Power consumption: 150ma (100ma while no beep) Typical operate distance: 100mm (mifare one) Dimension: 123 * 88 * 25 (mm) Sam slot amounts: 2 Software; free sdk Delievry in 5 days after the payment is received. Inner package: plastic foam Outer package: box/carton Weight: 330g Terms of delivery: dhl, tnt, ups Delivery time: 5 working days after receive payment.
Jmy501 series rf module includs:jmy501a, jmy501c, jmy501d, jmy501e, jmy501g, jmy501h, jmy501m. Each model has its own characteristics. Model: jmy501h 1.Introduction Jmy501h is a rfid read/write module with an uart and iic serial port. The module supports iso/iec14443a&b and iso/iec15693 contactless cards. The module has various functions. User operates the module via simple commands. The module has excellent performance and stability. The antenna is separated from the module. 2.Characteristics Pcd model:nxp cl rc632 Working frequency: 13.56mhz Card supported:mifare 1k/4k, fm11rf08, ultra light, desfire, mifare prox, sr176, sri512, sri1k, sri2k, sri4k, srix4k, t=cl smart cards(both iso14443a & iso14443b) , ti tagit, i.Code sli, st lri and other iso15693 tags Anti collision ability:full function anti collision; be able to process multi-cards; be able to set operate single card only Auto detecting card:supported, default off Eeprom:512 bytes Power supply:dc 5v Interface:iic & uart (selected by sps pin, recommend to use iic) Communication rate:iic:400kbps, uart:19.2kbps/115.2kbps Max. Command length:254 bytes Interface level:3.3v(ttl level; 5v tolerance) Power consumption: 70ma Operating distance:100mm(depending on card and antenna design) Dimension:42mm¡Á21mm¡Á8mm Package:dip32 Weight:about 15g Isp:supported Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF Rohs:supported 3.Antenna We supply the antennas. There are three models: tx500, tx501 and tx502. The antenna customization is welcomed. Outer package: carton (size: 48*32*24mm) Weight: 100g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 150mA LED: four LED (red, green, blue, yellow) Dimension: 123mm ¡Á 88mm ¡Á 25mm Weight: About 200g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF.
New or used 100% genuine Cisco Products Fully tested and functioned perfectly 365days warranty Delivery via FedEx, DHL, EMS, etc. Cisco ASA 5510 adaptive security appliance is purpose-built solution that combine best of breed security and VPN services with the innovative Cisco Adaptive Identification and Mitigation (AIM) architecture. Designed as a key component of the Cisco Self-Defending Network, the Cisco ASA 5510 provides proactive threat defense that stops attacks before they spread through the network, controls network activity and application traffic, and delivers flexible VPN connectivity. The result is a powerful multifunction network security appliance family that provides the security breadth and depth for protecting small and medium-sized business and enterprise networks while reducing the overall deployment and operations costs and complexities associated with providing this new level of security. Manufacturer: Cisco Systems, Inc Brand Name: Cisco Product Line: ASA Product Series: 5500 Product Name: ASA 5510 VPN/Firewall Product Type: VPN/Firewall Number of Ports: 5 Interfaces/Ports: 1 x Auxiliary Management Interfaces/Ports: 1 x Console Management Interfaces/Ports: 2 x USB USB 2.0 Interfaces/Ports: 3 x RJ-45 10/100Base-TX VPN Throughput: 170Mbps Firewall Throughput: 300 Mbps Number of Expansion Slots: 2 Expansion Slots: (1 Total) CompactFlash (CF) Card Expansion Slots: (1 Total) SSM
HF RFID Module SL031 is a mini Mifare read/write module. It supports Mifare 1k, Mifare 4k and Ultralight and is applicable for 13.56MHz. It does auto Real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one PCB. In view of its maximum working current and sleep current are 45mA and 10uA respectively, SL031 is preferential for the applications which require low power cost.
The cisco coarse wavelength-division multiplexing (cwdm) small form-factor pluggable (sfp) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy gigabit ethernet in their networks. The product set helps enable the flexible design of highly available, multiservice networks. The cisco cwdm sfp solution is a convenient and cost-effective solution for the adoption of gigabit ethernet and fibre channel in campus, data-center, and metropolitan-area access networks. Arrange shippment on the receipt of payment Ship via fedex, dhl, ems and so on Expert package
Manufacturer: cisco systems, inc Brand name: cisco Product series: 7300 Product model: 7304 Product name: 7304 router chassis Product type: router chassis Interfaces/ports: 1 x rj-45 10/100base-tx management Interfaces/ports: 1 x rj-45 console management Interfaces/ports: 1 x rj-45 auxiliary management Standard memory: 512mb Memory technology: sdram Flash memory: 256 mb Expert package
Manufacturer: cisco systems, inc Brand name: cisco Product line: catalyst Product series: 3750-e Product model: 3750e-48td-s Product name: catalyst 3750e-48td-s multi-layer stackable switch Product type: layer 3 switch Number of ports: 48 Gigabit ethernet port: yes Interfaces/ports: 1 x rj-45 console management Interfaces/ports: 48 x rj-45 10/100/1000base-t lan Interfaces/ports: 1 x rj-45 10/100base-tx management Interfaces/ports: 2 x stack Connectivity media: category 5 utp 10/100/1000base-t Performance: 128gbps switching fabric Performance: 101.2mpps forwarding rate Performance: 64gbps stacking bandwidth Performance: 68gbps backplane speed Performance: 95mpps stack forwarding rate for 64-byte packet Expert package
Being developed based on nxp's low power transponder ics, hf rfid module sl031 is a mini mifare read/write module. It supports mifare 1k, mifare 4k and ultralight and is applicable for 13.56mhz. It does auto real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one pcb. In view of its maximum working current and sleep current are 45ma and 10ua respectively, sl031 is preferential for the applications which require low power cost.
Use: telecommunication networks , data networks , video&catv Feature: bellcore compliant , wavelength independent (dwdm) , durability (well over 100mw) , simple and reliable structure Type: lc Size: 3í5í8í10í15í20db 10pcs per bag
The reasons you may want to get help from us: 1. We provide very good quality. As said before, we only sell brand new, sealed products. 2. We offer professional consultancy. Actually, we sometimes even help our si partners to revise their bom, for larger projects, based on our experienced technical sources. 3. We understand the si life and pain, that we usually concede in product or service price to our utmost, that may help you be more competitive. 4. You can even outsource the project to us, that lower your cost, but still saves your brand.
CISCO full-line router with competitive price and strong tech support.
RFID card .
ISO Standard 250pcs/box,2500pcs/carton
2d barcode reader Encode products information, such as name, original, period of validity to 2d graphics, and printing by special material, so the 2d graphics can not be seen, stick the lable that contain the invisible 2d graphics onto your products.If your product is fraud by another company, use the invisible 2d barcode reader, it will help you distinguish which products is yours easily. The product contains three petents Portable design
Cnc router
