HF RFID Module SL031 is a mini Mifare read/write module. It supports Mifare 1k, Mifare 4k and Ultralight and is applicable for 13.56MHz. It does auto Real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one PCB. In view of its maximum working current and sleep current are 45mA and 10uA respectively, SL031 is preferential for the applications which require low power cost.
Being developed based on nxp's low power transponder ics, hf rfid module sl031 is a mini mifare read/write module. It supports mifare 1k, mifare 4k and ultralight and is applicable for 13.56mhz. It does auto real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one pcb. In view of its maximum working current and sleep current are 45ma and 10ua respectively, sl031 is preferential for the applications which require low power cost.
Mifare reader SDK KIT Frequency:13.56MHz Transponder:Mifare Classic 1K, 4K; MIFARE Ultralight Power Requirements:5V DC Current: ï¼?100mA Output interface:RS232 Reading distance:0-5cm Power provided:Key board Data Baud rate:9600(bit/sec) Storage Temp.-10°C-85°C Size:140*100*30mm Nominal Weight:0.25kg
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: USB Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC500 Working frequency: 13.56MHz RF standard: ISO14443A, ISO7816 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: RS232 Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
> IK10 anti collision > Metal Case, anti-vandal > Waterproof, conforms to IP66 > Wiegand 26~44, 56, 58 bits output > Card Type: 125KHz Hid & EM cards, 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K cards > Reading range: 3~8cm > External LED Control & External Buzzer Control
Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe
This high frequency ISO RFID card is intended for ticketing and payment applications, access control and asset tracking. MIFARE Card,MIFARE smart card high frequency for you! Key Future - Dimensions: CR80 85.5 x 54mm - Thickness: 0.84mm - Card Surface: Matt/ glossy finish - Housing: Lamination - Working Frequency: 13.56MHz - Reading Distance: 10cm typically - Data storage time: 10 years
