Being developed based on nxp's low power transponder ics, hf rfid module sl031 is a mini mifare read/write module. It supports mifare 1k, mifare 4k and ultralight and is applicable for 13.56mhz. It does auto real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one pcb. In view of its maximum working current and sleep current are 45ma and 10ua respectively, sl031 is preferential for the applications which require low power cost.
HF RFID Module SL031 is a mini Mifare read/write module. It supports Mifare 1k, Mifare 4k and Ultralight and is applicable for 13.56MHz. It does auto Real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna in one PCB. In view of its maximum working current and sleep current are 45mA and 10uA respectively, SL031 is preferential for the applications which require low power cost.
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Supplier: Mifare module, mifare reader, mifare embedded module, RFID module, RFID reader, RFID embedded module
Supplier: Desktop reader, RFID module, access controller, access reader, mifare 4k (S70), mifare 4k (S70), tag & keyfob, ARM9 series, RFID accessory, desfire 4K/8K, i.Code sli, ultra light U10, IC card reader, RFID reader, mifare reader, contactless IC card reader
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
