Kammprofiletm gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25mpa) Other items in : gasket kammprofile gasket corrugated metal gasket Materials for the faces: Flexible graphite, ptfe, non-asb, etc. Normal with thickness 0.5 mm
Spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Other items in : gasket spiral wound gasket » inner and outer ring of swg On request
Detailed product description Graphite packing ring -content of graphite: at least 99% -can be reinforced by 304ss , nickle wire -content of wire mesh:60% Graphite packing ring, graphite gasket is formed by molding flexible graphite tape or flexible graphite braided packing, and metal materials can also be put in together. It is mainly used for sealing or valves, pumps and expansion joints, which are used in oil industry, thermoelectric station, nuclear power station and other general industries. The property solves the problemof corrosion to the valve stem completely. Typical types Available in 99% purity, corrosion inhibited and oxidation resistant grades. Supplied endless, split or as matched halves. Square or rectangular section rings supplied as standard Non-standard shapes can be producedto suit specific requirements. Metal tipped rings available for high pressure anti extrusion applications. Graphite packing sleeves with or without stainless steel eyelets are available. Typical applications Packing for dynamic sealing of compressors and pumps. Packing for valves. Packing for the gland boxes of chemical instruments. Available in almost every style of our braided packing. For composite sealing to take the place of mechanical sealing. Wooden box
Construction: Zt-410(graphite sheet jacketet tanged metal) is made by materials of three cascades. A laminated graphite is inserted into a convexo-plane metal frame perforated. It is produced by specially pressing and sticking process. This kind of sheet is be seized of the characteristics such as good compressibility and resilience, small stress relaxation, fine compensation function for uneveness of sealing surfaces and long working life. Normal style: zt-410/304 Zt-410/316 Zt-410/other tanged metal material Technical data: Compressibility: 19-23% Graphite purity: min 99% Chloride content: max 50ppm Temperature: -200 to 550 Pressure: up to 600bar Ph: 0-14 Media: Steam, mineral oils, heat transfer oil, hydraulic oil, fuel, water, seawater, freshwater. Benefit: Permanently elastic, even in hot-cold cycles over the entire temperature range, no aging, no brittleness, no hot or cold flow, long time uniform compressibility and resiliency independent of temperature. Available: Sheets gasket: zt-g410 Dimension: 500 x 1000 x 1.0 /1.5 /2.0 /2.5mm 500 x 1500 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1000 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1500 x 1.0 /1.5 /2.0 /2.5mm Special density , thickness or insert material are avaliable to request. Wooden box
Reinforced asbestos free sheets (1) stainless steel wire-mesh inserted (2) high temperature and high pressure 3) 0% asbestos Reinforced non-asbestos sheet The product is made of non-asbestos sheet that metal pressed and compounded by sheet thickness, which is extensively applied in manufacturing various motor gaskets. It is a new material that will substitute asbestos products. The product has excellent performance in dilatability, sealing equality and long life etc.. Mainly applied in automobile farming machine, motorcycle and engineering etc. , it is also can be used in high strength gaskets and cylinder gaskets etc Standard size: 1000x1000mm, 1000x1200mm, 500x1000mm, 500x1200mm. Thickness: 1.0 to 2.5mm Technical data: Density, (asbestos paper): 1.0~1.3g/cm3 Condensability: 30% Elastic recovery: >35% Sealing performance: 150-300. Wooden box
Description:zt-600 spiral-wound gasket is formed of v-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Application: We can produce according to asme, bs, jis and en(din) standards or client request. ProductsStyleFlangeFor example Basic type swgZt-600Tongue and groove304/ptfe Swg with inner ringZt-600 irMale and female304 304/fg Swg with outer ringZt-600 crRaised face Flat face304/asb cs Swg with inner & outer ringsZt-600 ic304 304/fg cs Swg for heat exchangerZt-600 hHeat exchanger304/fg with 1 bar of dj Special shape swgZt-600 sSpecialOval Material: StyleStructureHoop materialFiller materialInner & outer ring materialNormal thickness mm GasketInner & outer ring Zt-600Without rings304(l);316(l) 321;317l 31803 Monel, Ti, ni Inc Hast.C/b Zr702 Etc. Graphite, ptfe, Asbestos Non-asb Mica, EtcCs, 304(l), 316(l), 321;317l 31803 Ti, ni Inc Hast. Monel, Zr7023.2 4.5 (0.175¡±) 6.42 3 (1/8¡±) 4 Zt-600 irWith inner ring Zt-600 crWith outer ring Zt-600 icWith inner & outer rings Color cord as asme b16.20 on request. Wooden box
Gaskets.
With good compressio elasticity, it is applicable to the sealing parts under the intense alternating temperature and pressure, as the static sealing elements at the flange joints of pipelines, valves, pumps, heat exchangers, towers, manholes, handholes, etc. Ití»s widely used in petrochemical, machinery, electric power, metallurgy, shipbuilding, medicine, atomic energy, aerospace and other fields.
The basic properties of selected materials Material Hardness(HB) Temperature(íµ) Soft iron 90 530 Carbon Steel 120 530 304(L)íó321íó316(L) 160 750 5Cr1/2Mo 130 500.
Features Specifications: Main properties : Properties unit Result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 18 Ultimate elongation(min) % 230. Applications:- Insulating cover for conductor, pipe for corrosive fluids.
The basic properties of selected materials Material hardness(hb) temperature Soft iron 90 530 Carbon steel 120 530 304(l)íó321íó316(l) 160 750 5cr1/2mo 130 500.
The gasket are made of a reinforced graphite sheet or non asbestos sheet by punching or pressing, depend on its excedllent corrosion-resistance, high-and-low temperature resistance, finecompression resilient the product is widely applied as cylinder head seals of automobile engine, diesel engine, air compressor, refrigerating machine, etc.
Spiral wound gasket Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Product Information: Description: GOT - 420 Corrugated Metal Gasket is processed by metal flat ring into concentric waveform coil by die-pressing, rolling, or turning techniques, with the surface sticking non-metal as expanded graphite or PTFE. Comparing with 410 Kammprofile gasket , the lining metal can choose multiple thickness, as 3mm, 2mm, 1mm, 0.5mm, etc. and the metal wave distance can be different according to the width difference of the sealing surface, generally be 3mm, 4mm, 6mm Selectable material: Metal material German trademark Hardness HB Temperature íµ Density g/cm3 Thickness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 0.5mm; 1mm, 2mm; 3mm, 4mm SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, PTFE, asbestos plate, non-asbestos plate; Generally the thickness of the dual overlaying is 0.5 mm, 1.0mm, 1 .5mm
Product Information: Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type Kammprofile gasket 410L Kammprofile gasket with outer ring (integral type) 410LM Kammprofile gasket with outer ring (split type) Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used. Product application: GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa Selectable material: Metal material German trademark Hardness Temperature íµ Density g/cm3 Thichness mm Carbon Steel 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304, SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316, SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other metal on require Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; PTFE, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa
Reinforced graphite gasket
Double jacketed gasket Product application: Got is particularly suitable for heat exchanger, gas pipeline, cast iron flange, cylinder head and boiler, and other containers. Generally, when installed, it can press the initial thickness of the gasket to get a 30% deformation, thus can effectively seal the unevenness and small defects of the flange. Through choosing different metal and different fillers, it can suit to different mediums.
Spiral wound gasket Spiral wound gasket is the best in the compression resilient in all the half-metal seal gasket, which is made by the metal hoop band and different kinds of packing material. We can make its structure density according to the demand of different locking force, and we use the inner and outer circle to control the maximum compact degree. So it can be well suit the rough flange face, especially suit the situation of unbalance load, loose of joint force, temperature and pressure change periodically , concussion and shock. It is used in flange joint of valve, pump, heat exchanger, tank, and handhole. It is widely used in the fields like petrochemical industry, machine, electric power, metallurgy, ship-building, medicine, atomic energe, space navigation. We made spiral wound gasket conform to different standards, for example, asmi, bs, jis, din and several other criterion used in china. Item no. Name Section plane At601 basic type At602 with outer ring At603 with inner ring At604 with inner&outer ring Hoop material / inner&outer ring material Packing materal Ocr13 asbestos band 304ss expanded graphite 304lss teflon band 316ss non-asbestos 316lss mica Low carbon steel 321ss 316tiss monel 400 Titanium nickel 200 Inconel 600 hastelloy b2 Hastelloy c276 Inconel 800 Aluminum others
