Product Information:
Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange.
410 basic type Kammprofile gasket
410L Kammprofile gasket with outer ring (integral type)
410LM Kammprofile gasket with outer ring (split type)
Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used.
Product application:
GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa
Selectable material:
Metal material
German trademark
Hardness
Temperature íµ
Density g/cm3
Thichness mm
Overlaying material:
Flexible graphite, asbestos plate, non-asbestos plate;
PTFE, mica plate, lead, etc.
Generally the thickness of the dual overlaying is 0.5mm
Description: GOT - 420 Corrugated Metal Gasket is processed by metal flat ring into concentric waveform coil by die-pressing, rolling, or turning techniques, with the surface sticking non-metal as expanded graphite or PTFE. Comparing with 410 Kammprofile gasket , the lining metal can choose multiple thickness, as 3mm, 2mm, 1mm, 0.5mm, etc. and the metal wave distance can be different according to the width difference of the sealing surface, generally be 3mm, 4mm, 6mm
Selectable material:
Metal material
German trademark
Hardness HB
Temperature íµ
Density g/cm3
Thickness mm
Overlaying material:
Flexible graphite, PTFE, asbestos plate, non-asbestos plate;
Generally the thickness of the dual overlaying is 0.5 mm, 1.0mm, 1 .5mm
Product Information:
Description: GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange.
410 basic type Kammprofile gasket
410L Kammprofile gasket with outer ring (integral type)
410LM Kammprofile gasket with outer ring (split type)
Model 410LM split type Metal toothed gasket with outer ring, can choose richer metal, e.g. carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410L, and the lining metal can be repeatedly used.
Product application:
GOT toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25Mpa
Selectable material:
Metal material
German trademark
Hardness
Temperature íµ
Density g/cm3
Thichness mm
Overlaying material:
Flexible graphite, asbestos plate, non-asbestos plate;
PTFE, mica plate, lead, etc.
Generally the thickness of the dual overlaying is 0.5mm
Spiral Wound Gasket (SWG) consists of a thin metallic strip and a soft non-metallic filler that are simultaneously wound on a rotating mandrel. The metal hoop is pre-formed with a V or W shaped profile, which allows the gasket to act as a spring between the flanges. Further, the hoop provides the basic structural element for the gasket while the non-metal filler material seals small imperfections on the flange surfaces. Depend on its excellent compression resilient, ití»s suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipes, valve, pumps etc. They are available in all standard the flanges of sizes, e.g. ANSI ú¼API ú¼DINú¼JISú¼JPIú¼BS etc. (Pressureí_25Mpa)
Style Construction Flange Hoop material Filler Inner & outer material Size (mm) Thickness (mm)
Material Code V W
6000 Basic type Tongue and Groove 304(L),316(L)
Coir fibre is the major product that is extracted from the coconut husk. Coir fibres have a multitude of different applications and they are available in blocks and bales as well. The coir fibres are generally used in the production of ropes, mats and mattresses. The coir fibres that are extracted from the inner layer of the outer part of the coir husk are used in large scale production of the ropes, mattresses and brushes.
Coir fibre is also the main product used in manufacturing the geotextiles. Geotextiles have a wide range of uses. But it is mainly used in limiting the soil erosion. Soil erosion has become one of the most prevalent problems of our society. Although there are various methods for limiting it but the erosion can be successfully kept in check by the use of geotextiles. Moreover, the geotextiles are also used in various types of road works and for surrounding the dams.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
