The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine. Fixed blade turbines are very well suited to low head power plants with limited variation in head and load. Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow. Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load. Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
The tubular turbine is an axial flow turbine, in a straight or S-shaped configuration. A Tubular Turbine can be supplied for a head of 2 m to 30 m. The runner diameter is available from 0.8 m to 5.6 m. Power capacity is from 250 kW to 15 MW. This turbine has high efficiency and lower constructon cost.
Pelton turbine The runner has bucket shaped blades on the periphery. The jet of water is tangential to the runner. The characteristics are, high head applications, a simple design, few problems with cavitation, highly cost effective. Pelton turbines can be supplied for a head of 100m to 500 m. The runner diameter is available from 0.55 m to 1.5 m. Power capacity is from 200 kW to 10 MW. Inclined jet turbine: The water flows into and out of the runner at an angle to the main shaft. The characteristics are high efficiency over a wide range of water flow, more flexible installation options, somewhat more complex than a Pelton turbine. Inclined jet turbines can be supplied for a head of 60m to 300 m. The runner diameter is available from 0.32 m to 0.8 m. Power capacity is from 55 kW to 6.3 MW.
In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency. A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW. New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.
Hydropower equipment, hydro turbine, hydropower plant, kaplan turbine, francis turbine, pelton turbine, tublar turbine, turgo turbine, turbine spare parts, generator, tiller, runner blade, water pump.Site survey & design, exporting, erection and commissioning, plant management and maintenance, technical support
- engine: gasoline / diesel - capability: 2kw-30kw - package: HANTU brand, OEM, or neutral packing -certificate: CE, GS, UL, approval -
synchronous or asynchronous avilable speed,voltage, power,frequency could be customized according to user's requriements wind cooling and water cooling type class H insulation , protection grade IP55, started directly, without control cabinet Finite element analysis is used in designing. Compact structure, low startup torque solves the problem of low speed. Inproving water energy utilization strong rotors, the generator could achieve high speed small size, light weight , high energy density, suitable for special situations run efficiently throughout the whole speed range, hight efficient on producing power high-speed oil-contained bearings, maintenace free, more reliablem long service life the parameters like voltage, speed, power can be customized, the shape can be changed, more mounting way for your choice, like spline shaft, biaxial extension, flange CE approved
permanent magnet rotro structure,no field winding, no carbon brushes, no slip rings, simple structure, high speed, small size, light weight, and large power densityreliable and durable high efficient,small heat ,long life save energy more than 15% than ordinary mortors
Drill rig, turbine, turbine generator, diesel generator, generator.
Transformer oil pufier,lube oil filtraion,engine oil recygling,turbine oil filtering,hydraulic oil purification.waste oil vacuum distillation system.
Transformer Capacity and Loss Tester Transformer Oil Tester I Introduction Transformer Capacity Testing Instrument is specialized in bad power users evading basic electricity secretly adds capacity problems and is a high precision instrument specially used for the measurement of the transformer capacity and parameters. This product uses color LCD monitor, English display, simple and quick menu operation, man-machine interface is friendly. The internal of the instrument has a rechargeable battery and it can work without external power source. A fully charged battery can be continuously measured more than 100 sets. In addition, the instrument can provide three-phase precise 50Hz sine wave AC test power without the external three-phase test power, the pressure regulator, up flow reactor and other auxiliary equipment in measuring the capacity and transformer load loss, thus greatly improving the efficiency of the work. This is a multi-functional measuring instrument, which is equivalent to two common devices: activity transformer capacity tester and transformer parameter tester. It can be used for test transformer capacity, model, no-load current, no-load loss, load loss, impendence voltage and so on. This product has many advantages such as small, light , high accuracy, stability, simple operation and so on. It can replace the multi-meter method to measure the transformer loss and capacity with simple wiring and convenient testing so that the work efficiency can be greatly improved. Function 1. We can measure a variety of distribution transformer, power transformer capacity instead of the additional power. It is more convenient and efficient. 2.Combined with the power, voltage, boost up flow and other equipment, it measures various transformer no-load current, no-load loss, impedance voltage, load loss and so on. 3.All results are automatically carried out relevant correction. You only need to input the related parameters (such as temperature, load adjustment coefficients), then the instrument can automatically correct such as waveform deformity correction, temperature correction, correction of non rated voltage, rated current correction. 4.The maximum voltage is up to 750V and the maximum current is up to 100A. It is equipped with protection circuit. 5.The voltage and current range can be very flexible and easy to expand. 6.It has large screen, high brightness LCD display, English menu and operation tips, friendly man-machine interface and wide temperature, brightness adjustable type LCD screen, which can adapt to the different temperature.
Turbines, centrifuges, pumps, garbage processor & electrical generator, CNG, LNG gas filling station equipment.
please directly contact terry.zheng at carbinpower dot com for more information Q: Why Carbin? A: CARBIN is different and always INNOVATING - Specialized in differentiated products and services to global market. Carbin products will make our partners exclusive and enable partners to provide more choices to clients. More Choices Create More Opportunities. 160A / 300A Auto-choke Gasoline / Diesel (Current-adjustable) Welder Generator Main Parameters: Model Gasoline 160A / 300A Diesel 300A CCC Certification CCC Certified - Welding Mode Manual Arc Welding Manual Arc Welding No Load Voltage 65 V 65 V Welding Voltage 22-28 V 28-75V Welding Current 50-210 A / 70-300A Max 300A Current Adjustor Yes based on demand of client / No Yes based on demand of client / No Continued Load Running Rate 60% 60% Auxiliary Power Output DC 230V, 400W / DC, 230V, 1000W DC, 230 V, 1000 W Welding Electrode Size 2.5-4.0 mm / 2.5-5.0 mm 2.5-5.0 mm Engine Model 170F / 192F 192FD Engine Type Single Cylinder, Air Cooling, 4 - Stroke, OHC Single Cylinder, Air Cooling, 4-Stroke, Direct Fuel Injection Fuel Supply System Carburetor Diesel Displacement 208CC / 420CC 498CC Starting Method Recoil / Key Start Recoil / Key Start Fuel Tank, Oil Capacity 3.6L, 0.6L / 6.5L, 1.1L 5.0L/1.65L Gross Weight 38 KG / 54KG 87 KG Net Weight 36 KG / 56KG 83 KG Packing Size L�?W�?H 520�?410�?535 mm / 570�?535�?570 mm 650�?530�?630 mm Container Load 240 to 160 units/20GP 500 to 360 units/40GP 620 to 360 units/40HQ 110 units/20GP 220 units/40GP 300 units/40HQ Unique features different with conventional gasoline welder generators: Carbin unique Current-adjustable design Carbin Current Adjustor in Welder Generator can provide adjustable stable current output which will highly increase the welding efficiency. Synchronous power generating and welding Carbin brand Smart Engineering Welder KB160A outputs welding current strong enough to power argon arc welding, and generating DC current for another electrical appliance at the same time, making possible to operate welding job and power generating at the same time, being an ideal power tool for outdoor working site where urban power supply not available. Carbin brand Smart Engineering Welder outputs 300A current strong enough to power argon arc welding, making possible to operate welding job and power generating at the same time, being a pioneer in powering 300A welder with single cylinder gasoline engine for best cost-effective benefits. Light weight, portable makes competitive price KB160A - Net weight of 36 KG for 2.5 �?? 4.0 mm electrode welding KB300A - Net weight of 54 KG for 2.5 �?? 5.0 mm electrode welding
ZYD transformer oil filtration machine, ZY insulating oil purifier, ZYM mobile trailer-type transformer oil purification systems, IIJ-II insulating, transformer oil dielectric strength tester, TYA lubricant, hydraulic, turbine oil filtration machine, TJ coalescence and separating oil treatment plant, AD air dryer for drying electric equipments, NKVW vacuum system for vacuum transformer, TPM oil dehydration plant.
The ZZ series vacuum oil injector is made on the basis of Yuneng's long-term experience in treating various kinds of high-purity transform oil and turbine oil. It can meet, to the greatest extent, the needs of vacuum oil injection and supplementation of various types of electric transmission and transformation. Export standard packing.
Series pf plate-press oil purifier is mainly used to purify transformer oil, turbine oil, engine oil, diesel oil, aviation hydraulic oil etc. It can remove water and particles from oil, if adopting stainless steel body, the machine can be as the vegetable oil purifier. The machine is mainly composed of filtering bed, oil pump and primary-filtering components. It uses filter paper as filter medium, different filtration precisions choosing different filter paper. Series pf is high filtration precision, simple structure, easy operation, low operation cost. Our products list as following: Zy-high effective vacuum transformer oil purifier, oil filtration Zyd-double stages insulating oil purifier, oil treatment, oil purification Zym-mobile/trailer type transformer oil treatment, oil filtration mnachine Ty-turbine oil purifier, oil treatment Tj-coalescence and separating oil filter, oil purifier machine Tya-lubricating oil purifier/hydraulic oil purification Tyj- phosphate ester fire-resistant oil purifier, oil filtration machine Jzs-engine oil regeneration system, waste oil recycling Bz-trasnformer oil regeneration device, oil pruifier Pf-plate pressure oul filter, oil purifier machine Jl-portable oil piurifier, oil filtering, oil filter Iij-ii-bdv oil tester, insulating oil dielectric strength tester Nkee-oil moisture sensor, water content tester
Transformer, insulating, lube, turbine oil purifier.
Technical features: 1.This machine can remove water, gas and impurities in oil with high efficiency to elevate the withstand capability and quality of oil, which ensures a safe operation of power generation equipment; in the meantime the purifier supports vacuum oil filling and energized operating. 2.Small size, high efficiency, easy to move and can be put in service both indoor and outdoor. 3.The infrared liquid level automatic control device, system automatic pressure protector, high efficient water and gas removing components are adopted, which are easy and safe to operate. Use: Mainly used for treatment of non-conformable transformer oil, mutual inductor oil and circuit breaker oil in power industry including manufacturing enterprise. Advantages: Highly efficient, cubic evaporation, 3-5 times higher efficiency than ordinary oil purifier. Its infrared level control, automatic temperature regulation and interlocking protector enable a man-machine separation. The design is of new technology, light weight, compacted, flexible, easy to move and can be used at any environments, being very effective and easy to operate with less power consumption. One model has an automatic withstand testing system, which allows display or printout of the oil withstand status at any time. L:970mm W:630mm H:900mm.
The ZYD Series Transformer Oil Purification/ Regeneration machine is mainly used to improve the properties of insulation oil. It can remove trace dust, water, gas, particulate matters etc. From the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which have insulation system. ZYD Series specialize in purifying transformer oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is also suitable for treating low viscosity lubrication oil. Edges of ZYD Series To remove free, soluble water, carbon, free and dissolved gases and particulate matters, dust from insulating oil, transformer oil, dielectric oil, cable oil effectively and rapidly. With Vacuum pump and Roots pump. Enhance the value of breakdown voltage greatly. Easy handling and maintenance. Inject oil into the transformers. Lower maintenance and replacement expenses. Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters. High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely. Utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. Structure Dehydration (Degas) System 1, The vacuum chamber has flash tower, which can evaporate the water efficiently. Also it has the spraying nozzle with degassing elements design. The heater, being placed on the vacuum vessel, becomes an evaporator. Thus the flash tower of vacuum vessel is three times more than that of the general vacuum vessel. This innovation can dehydrate and degas effectively and efficiently. 2, The optimal structure of the dehydration (degas) system enlarges the surface area of oil exposed to the vacuum system and extends the flowing distance of the oil in the vacuum system. Thus there has sufficient time to remove the moisture and gas from the oil by vaporization. ¡ô Filtering System (particulate matter removal) 1, The filtering materials with variable apertures are made of specialized glass fiber or stainless steel optionally. The sizes of the filtering fiber and aperture dwindle gradually in the different filtering stages. The impurities with different particulate sizes are filtered step by step. The capability of removing particulate matters and impurities is improved greatly by this method. 2, The filtering system has stable and prefect filtering fineness. The filtering fineness has several grades, including 0.5, 1, 2, 3, 5, 6, 10 Micron etc. Oil ¦Â>=1000 after filter. 3, The filtering system is equipped with reverse rinse and filth device. It improves the effectiveness of filtering and extends the lifetime of filter awfully. Oil heating System 1, The unique heater structure heats the oil uniformly. 2, Oil Heater System assures less then 1.0 w/cm2. During the heating process, the deterioration of the oil caused by overheating is avoided. 3, The oil temperature can be adjusted between 20C to 80C. The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree. 4, Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater. Electrical Apparatus Controlling System 1, The main components of the electrical apparatus made by Schneider, Siemens and so on ensure the safety of the controlling system. 2, Having several protection systems which will avoid oil ejection, overload and over voltage etc. Oil-level Controlling System 1, The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being suctioned into vacuum pump in the operation. 2, The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump. High quality components The main components parts of Tongrui products such as vacuum pump, Roots pump, oil pump and electric apparatus are from SIEMENS, LEYBOLD, OMRON, SCHNEIDER, HYDAC, TOP, AMICO etc. It ensures oil filtration systems products high quality and reliability. Vacuum Pump Rotary Vane Vacuum Pumps, is a basic equipment used for pumping air from sealed vessels to attain vacuum condition. The vacuum pumps may be applied singly, or as the backing pump of the other kinds of pumps, such as booster pump, diffusion pump, molecular pump and titanium pump etc. it may be used for vacuum film-plationg, vacuum heat treatment, vacuum ca-sting and also air-extraction of electric tubes, bulbs and thermos flaks. The pump may also be equipped in medical institutions and laboratory. Capacity:3740L/Min Ultimate pressure:less than 6*10-2Pa Rotary speed of pump:450 R/Min Motor Power: 3Kw Cooling mode: water cooling, >1L/min Roots Pump Roots pumps can be used as boosters combined with backing pump. Of a rotary vane vacuum pump,or a liquid ring vacuum pump. But they can not be used to exhaust No Water-cooking silent running due to specially selected gears Overflow valve which permits the pump to be swiched on at atmospheric pressure and gives shorter evacuation times Standardized ISO connections Smooth running due to dynamically balanced rotor Low operating costs with high pumping speed in the medium-high vacuun range No friction of moving parts in the compression chamber due to even gaps between rotors and housing walls. Capacity:1250m3/h Ultimate pressure: 5*10-2Pa Rotary speed of pump: 2890r/min Motor Power: 4Kw Cooling mode: water cooling, >2L/min Instrumentation options Foam Level Detector When there is foam in the tank and foam reaches a certain level (resetable), a signal will be sent to the magnetic valve, the magnetic valve will automatically shut on. The foam will be removed quickly. After removing foam, the magnetic valve will shut off. Unit Type: set Package Weight: 40.0kg (88.185lb.) Package Size: 60cm x 25cm x 65cm (23.62in x 9.84in x 25.59in)
Why purify transformer oil? Maybe the first question should be, ¡°why is it important to have purified oil in a transformer?¡± Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating--reducing the electrical efficiency and lifetime of the transformer. Likewise, water contamination at levels as low as 30 ppm (parts per million) can adversely affect the insulating strength of the oil. With ever-increasing standards for energy efficiency of power distribution transformers, the need to effectively degas will become even more important in the future. particles contamination will also affect the function of insulating oil. So we need to clean used transformer oil. Features: 1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility. 2. Operational can be P.L.C (Programmable Logic Controller). 3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength. 4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control. 8. Specially applied to vacuum oiling and drying for power transmission equipments. 9. The oil of any grades can be treated either on- or off-load. 10. Special oil pump design with lower noise. 11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn¡¯t pollute environment (it can be used to architecture and road pave) Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 70kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices. (oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine) Package Size:60cm x 25cm x 65cm (23.62in x 9.84in x 25.59in) Package Weight:40.0kg (88.185lb.) Unit Type:SET
