Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose.Import and export of goods and technology
We supply spare parts for diesel engine Replacement parts for perkins, cumminse
Model: 80BP-55 Lift: 55m Suction: 9.2m Displacement: 88m3/h Speed: 2200 r/min Power 7.5 kw
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Product name: Connecting rod for Daewoo Damas 0.8L 12160-78B00-00 conrod stock Price break down: OEM auto spares parts Factory 1PC 50PC 200PC 1000PC USD13 USD12 USD11 USD10 Connecting Rod for trucks factory Material: Forging steel Warranty: 1 year OEM Connecting Rod for cars factory Stock available Our company specialized in supplying full range of auto spares parts for cars and trucks. Our team has been in this field since 2005, after years of developing, we have enforced our quality control (QC) service, after-market service which has won us a high reputation among our customers. We have our own factory and warehouse and factory visit is warmly welcome. We also provide casting cylinder head, crankshaft for trucks, custom Free Wheel Hub for cars
Engine model¡êo 4m40 Oem no.: me202621 Amc#: 908515, Car make: mitsubishi, Application: delica box (p0_w, p1_w) 2.8 d Pajero canter, Year: 95/09 - 98/10, 1994 -, Fuel type: diesel Cylinder head design: sohc/ohc Capacity tech.:2835cc/2.8d Cylinder: 4, Valve: 8 Carton sieze: 58*29*22cm
All watertight doors are available in aluminum, steel, stainless steel or a combination of these metals Meet IMO, SOLAS requirements Normal pump unit can be separately installed beside the door or other position. Application: used for engine&steering gear rooms with watertight bulkhead Type: Integrated / Normal Option: A0 / A60 Class Fireproof Material: steel/aluminum Max. Pressure:0.1Mpa Available certificates: GL, DNV, CCS, BV, ABS, LR, KR, RS, etc. Available in natural finish, primed or coated in accordance with client request. Sizes and colors will customize according to your requirements. Wooden cases, plymax cases.
Steel door meet SOLAS ,ISO 9001-2008 Application: apply for various kinds of access to storage and working spaces on vessels Optional: mitered/radius corner, round/square/rectangular window, wheel-operated Available certificates: GL, DNV, CCS, BV, ABS, LR, KR, RS, etc. Clear opening size: (wxh) 600x1400 600x1600 700x1600 700x1700 700x1800 750x1800 800x1800. Wooden cases, plymax cases.
GW series have minimum space requirements. Their high torque transmission capacity covers a speed range from 360 to 1800 rpm depending on size and reduction and a torque power speed(N/n1) capacity from 0.38 up to 46.2 for reduction from 2 up to 6: 1. The design family has six different modesl, four reverse reduction gears and two reduction gears without reversing function-each divided into eleven size. The relative configuration of input and output shaft is eighter coaxial or offset, the latter eigher vertically, horizontally or diagonally. The modular design affords a variety of advantages including low-cost-manufacture and spare stocking.
GVA series marine gearbos is for twin input-single output propulsion unit. The range of Max. Propeller thrusts: Normal (kgf). From 55000kgf to 200000kgf.
Marine gears of the design type GCS and GCH are single stage reduction gears with case hardened and ground single helical spur wheels. GCS type gears are of vertical offset design. GCH gears have horizontal offset shafts. The sizes GCS/GCH 450 to 560 are equipped with antifriction bearings. The sizes GCS/GCH 600 to 1000 are equipped with plain bearings. All gears can be equipped with a power take off (PTO) for which special superposition gears have been developed.
Marine Double Bollard 1) Material: Cast Steel (ZG230-450), Q235 Also we can supply other kinds of bollards like Single Bollard, Cross Bollard, Inclined Bollard , etc 2) Paint: Surface Epoxy Primer 3) Certificate: CCS, ABS, BV, etc With good quality and low price. Steel pallet or according to your demands
Main technical table Model swcm1520253040506080100150200250 Loadaverage load L/d119015401890231030803780448060207700112001470018200 Peak load L/h149193237289385473560753963140018382275 Organic load Kgbod5/d0.5950.770.9451.1551.541.892.243.013.855.67.359.10 Rated capacity(p)1520253040506080100150200250 Max capacity(p)1722273344546486110160210260 Electricityac380v, 50hz, 3+)/ac 440, 60hz, 3+) Power(kw)1.51.51.51.51.52.02.02.52.53.0 External dimensions L*w*h(mm)1550f 1400f 16001650f 1400f 16001850f 1500f 16351950f 1500f 16351800f 1700f 19001900f 1700 19502100f 1700f 20002500f 1900f 21502500f 1900f 23003150f 2400f 2300 Weight dry weight (kg) 1150120012501350150017501950215029003800 Wet weight (kg) 260029333210392846895665648681001040014680 Discharge standardtss35mg/l, bod525mg/l, cod125mg/l, coli form100pcs/100ml, ph:68.5. Packing:veneer case.
Description of product:
This Cylinder head 06H103064AC for is for volkswagon CDN CDA PA SSAT B6 TI-GUAN 08-2010 Material Alumium Warranty 1 year or 40,000kms Min if in stock, 1pc is ok. Delivery fast shipping. Courier , air, or by sea shippent. Payment: Paypal, T T, westerunion. or ali pay inspeciton 100
Broken Tap Remover VG-206 Adopt erosion principle to take out the broken parts. No force during processing and no damage to the parts as well. Lightweight design and portable tool can be applied to different fields. Water as working liquid and touch key operation. You can take out tools such as various diameters of wire tapping, drill, reamer, screw and plug gauge and etc. that broken in parts quickly and without damage. Specifications: 1. Handheld power source, touch key operation 2. Brass-style rods as electrode 3. Use water as working medium. 4. Take out broken parts without damage to screw thread. 5. It is good to work for broken taper in big workpiece. Features: Functions: 1. Adopt erosion principle to take out the broken parts. No force during processing and no damage to the parts as well. 2. Lightweight design and portable tool can be applied to different fields 3. Magnetic base and processing unit can be adsorpted to the workpiece. 4. Working head can be adjusted to any degree of angle. 5. Automatic feed processing and no need of a workman. 6. Water as work liquid and easy to use. 1. Single phase 220V power supply. 2. Touch key operation. 3. Automatic control processing depth. 4. Bulid-in work pump. 5. Various optional parts for different use.
Application of Anchor The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security. Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc. Specification of Anchor - Stainless steel -High corrosion-resistance. -Very effective under a wide variety of sea bed, tide and wind combinations. -Sets and re-sets fast and easily. -High holding power.
Application of Anchor The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security. Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc. Specification of Anchor - Stainless steel -High corrosion-resistance. -Very effective under a wide variety of sea bed, tide and wind combinations. -Sets and re-sets fast and easily. -High holding power.
