Spray Irrigation Pump

Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump, irrigation pump Model: 200QJ32-16/1 Flow: 32m3/h Head: 16m Power: 3kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/

Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump Model: 200QJ80-11/1 Flow: 80m3/h Head: 11m Power: 4kw Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) http://www.dragonpump.com/products/submersible-pump/ Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/ Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. http://www.dragonpump.com/products/qj-deep-well-submersible-pump/

Flow: 25m3/h Head: 65m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 15m3/h Head: 26m Power: 2.2kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.

Flow: 20m3/h Head: 30m Power: 3kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality.

Please confirm more details we will sent you price list. 1. what the water pumps head and water capacity? 2. Any request about the borehole diameter. 3. How about voltage and frequency 380V or 220V,50HZ or 60HZ? 4.Whatâ?²s the temperature of water? 5. What the material, cast iron or stainless steel? SkySeaParticipate in the formulation of national standards for submersible pumps. FAQ & Contact us: Q1: Are you manufacturer or a trading company? A: We are the best manufacturer in submersible pump with a history of 70 years in China. Q2: What are your payment terms? A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight. Q3: Can you do OEM? A: Yes, we can. Any OEM is welcome. Q4: How about MOQ? A: Usually, it is 5 PCS for each model. Q5: How about the delivery time? A: Usually, 20-30 days after receiving your L/C order. Q6: How about the warranty? A: 1 year. Why Choose US? 1. Specializing in manufacturing submersible pump products for 70 years. 2. The motor and pump body are self-produced on the whole line. 3. Each product is tested by 136 processes and strictly controlled by quality. Product Description: Submersible water pump for deep well has perfect design and resonable structure which has low noise and long lifetime, small volum, no water pollution. Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Product Advantage: 1. High efficiency and energy saving; Save and environmental friendly. 2. Strong and durable, stable and reliable. 3. Easy to use and widely application. Working Conditions (1) Three-phase AC power supply of rated frequency at 50HZ and rated voltage at 380±5%V.(user voltage at 660V shall be otherwise specified) (2) Pump inlet shall be kept below the dynamic level by 1 meter, but the submerged depth shall not exceed 70 meters below the static level. And the lower part of motor shall be kept at least 1 meter to the bottom of the well. (3) Generally, water temperature shall not be higher than 30. (4) Water quality requirements: a. Sand content in water not greater than 0.01%( weight ration) b.PH value between 6.5~8.5 c. Chlorine ion content not greater than 400mg/l

Flow: 20m3/h Head: 78m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

XC700 DC 96V Motor Controller for Solar Water Pumping System Xiongcai Technology is one of the earlier companies engaged in BLDC motor control. At the early stage, we focused on development and manufacture of automotive oil pump, water pump controllers, solar pump controllers, fountain pump controllers. XC700 motor controller is a mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it's ideal for agricultural irrigation. With water level indication, you can take action according to situation, eliminating any unexpected element. This product is one of the best sellers in XC product portfolio of motor controllers. This motor controller for solar pump comes with characteristics: Specification: Model: XC700-SP-96V-1300w Working Voltage: DC24-150V Rated Voltage: 96V Rated Current: 13.5A Working Temp: -30-85â?? Humidity: 95% Max Dimension: 115*96*39mm (PCBA), 144*170*61mm (set) Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection Start/stop and speed control Suitable for applications powered by solar panels, MPPT algorithm inside Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it. XC Motor Control has been specializing in motor control since 2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best. Have a try, you are worth a better solution.