The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Supplier: Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose
Services: Import and export of goods and technology
Buyer: Urea 46, diesel oil en590 10ppm, jet fuel a1, dap 18 46 0
Supplier: Basalt Reinforcerement, Basalt Roving, Basalt Chopperd Fiber, Basalt Rebar, Basalt Geogrid, Basalt Wool.
Basalt roving all types
*Description* This rovings Fiber Glass is a high-tech reinforcement for long fiber polyamide (PA) processes such as granulate long fiber thermoplastic (GLFT) and direct long fiber thermoplastic (DLFT). This rovings offer a hydrolytic stability in high performance applications. Each package is in a wrap film with each pallet stretch wrapped to protect the fiber glass roving from dirt and moisture. *Processing advantages* Excellent spreadability of the roving filaments in thermoplastic pultrusion allowing complete resin impregnation. Sizing on the fiber surface has been tailored to provide optimal balance of dry strength, fiber resin wetting and minimal sizing rub-off on process contact points. Available in outside and inside payout. Excellent processing in pultruded GLFT processes for molding of high performance long glass PA end products. Excellent wet out and saturation in polyamide (PA) resin. Highest mechanical as-molded properties with best-in-class long-term hydrolytic stability. KOHLI POLYMERS GMBH
Fiberglass chopped strands Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments. Yixing product characteristics: 1.Brand name:yixing fiberglass chopped strands 3.Filament diameter: 13um etc 4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to Your demand 5.Excellent clustering property, few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin, no fiber out product surface, good surface quality 8.Good strand integrity, low static, low fuzz, excellent mold flow ability 9.Quick wet-out by resin, excellent technical&mechanical properties 10.Water ratio:
CYC FIBERGLASS ROVING FOR FRP FILAMENT WINDING CYC Fiberglass Roving for FRP Filament Winding is finished with high performance sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resins. It is designed for filament winding process specially and provide fast wet-out in multiple resins with excellent mechanical properties. The typical end-finished products are including FRP water pipes, high pressure oil pipes, chemical corrosion resistant pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and other insulation industries. Glass Type: E-CR Glass Roving Type: Singe-end Roving, Direct Roving, Multi-ends Roving, Assembled Roving PRODUCT FEATURES Good strand integrity and even tension Fast wet-out in resin with low resin consumption Inner side unwinding smoothly & low fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (�¼m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150DF 13~24 600, 1200, 2400 4800, 9600 0.40 0.20 0.55±0.15 UP VE ECY280DF 13~17 1200, 2400, 4800 0.40 0.20 0.55±0.15 UP EP
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
