Flux: 4000ml/min Power: 18W Voltage: 24V DC.
Features: Step angel ( íp) : 1.8 Motor length l(mm): 99/150/201 Rate voltage (v): 4.95~5.44 Rate current (a): 5.5~8 Phase resistance ( ª+ ): 0.67~0.9 Phase inductance (mh): 12~15 Holding torque (n.M): 11.2~28 Lead wire (no.): 4 Rotor inertia (g. C¬o): 5.5~16.2 Motor weight (kg): 5~11.7
Features: Model: 42BLF01ú+42BLF02ú+42BLF03 Number of Poles: 8 Number of Phases: 3 Nominal Voltage VDC: 24 Rated speed RPM: 4000 Continuous Torque N-m: 0.063~0.188 Output Power Watts: 26~78 Peak Torque1 N-m: 0.18~0.6 Peak Current Amps: 4.6~14.1 Line to line Resistance Ohms: 0.6~1.8 Line to line Inductance mH: 0.18~0.54 Torque constant N-m/Amps: 0.042~0.044 Back EMF V/kRPM: 4.4~4.65 Rotor inertia g•cm2:: 24~72 Body Length(L) mm: 47~79 Mass kg: 0.33~0.63
SD-2H086MB Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80VDC Suitable for-2-phase and 4-phase motors Output current up to 5.86A Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200KHz Automatic idle-current reduction Small size (107*97*48),Weight:1KG
SD-2H044MA Features Low cost and good high-speed torque Supply voltage up to +45VDC Output current up to 5.86A Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200KHz Dip switch current setting 8 different values Small size (122.2*90*33),Weight:0.3KG
Q2HB88M Features (1) High performance, low price (2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480 (3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge (4) Bipolar constant current chopping circuit (5) Opto-isolated input/output (6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase) (7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V) (8) Highest response frequency: 200Kpps (9) Over voltage protection, overheat protection, over current protection
Hybrid stepping motor Item specifications Step angle 1.2 or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m ¬+ min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Step Angle 1.8fp or 0.9fp Step Angle Accuracy f+5% (full step, no load) Resistance Accuracy f+10% Inductance Accuracy f+20% Temperature Rise 80fpC Max.(rated current,2 phase on) Ambient Temperature -20fpC~+50fpC Insulation Resistance 100M ¬+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
Item Specifications Step Angle 1.8 Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 28N ( 20mm from the flange ) Max. axial force 10N Rotation CW( See from Front Flange ) Step motor, stepping motor, stepper motor, hybrid stepping motor, stepping
Item Specifications Step Angle 1.8íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Rotation CW( See from Front Flange)
Item Specifications Step Angle 0.72íp or 0.36íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
Hybrid stepping motor Item specifications Step angle 1.2or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m + min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Stepping motor driver cw250 Technical data: 1. Input voltage: 20 ½ 40vac or 24~60vdc 2. Phase current: adjustable from 1.5a to 5a 3. Running mode: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 steps 1/5, 1/10, 1/25, 1/40, 1/50, 1/100, 1/200 steps 4. Protection mode: overheat, overpressure and overcurrent protection 5. Overall dimension: 150mmß98mmß45mm 6.Weight:
Nema14 (35mm)hybrid stepping motor 35mm hybrid stepping motor 1)product name: 35mm high torque hybrid stepping motor 2)frame sizes:35mm 3)step angle: 1.8 4)body length: 31mm 5)shaft style: single or double 6)motor figure: square 7)lead wires:4 or 6 8)no. Of phase: 2., 4 It different according every model
Quartz infrared heating lamp, quartz tube.
Stepper motor.
Electric motors.
Stepper motor, brushless motors, drivers.
Light bulbs.
Electric motor.