5mm 7mm 8mm 10mm 12mm 14mm 16mm 10pcs/bag 0.10kg
14/12mm 12/10mm 10/8mm 7/3.5mm 5/3.5mm 14/12mm 12/10mm 10/8mm 7/3.5mm 5/3.5mm
1.Product description The microducts which with ribbed and low friction inner surface are made up of hdpe (high density polyethylene). It can be used single or as the primary tube of the microduct bundle. The Microducts are suitable for fibre blowing and direct buried and installed applications. 2.Features and benefits A.Material: hdpe, high density polyethylene B.Tube type 6-14mm C.Low friction internal coating D.With ribbed inner surface 3.Parameters Permissible tolerance (mm) ¡¡¡ì¡¨¨0.1 Tensile strength at yield (mpa) Hdpe microduct ¡y18 Lszh microduct ¡y8 Elongation at break [%] ¡y350 Minimum bending radius (mm) 20¡¡¡ì¡¨¦d Ring stiffness (kn/sq.M) Sn4 : ¡y 4 Sn6.3 : ¡y 6.3 Sn8 : ¡y 8 Sn12.5: ¡y 12.5 Sn16 : ¡y16 Normal operating pressure (bar) 12 Storage temperature (¡ãc) -20¡ãc ~ +60¡ãc 4.The main type of the products 8/6 mm 10/8 mm 12/10 mm 14/12 mm 4km/drum
Ftth telecommunication products.
Electronic parts
Product name0„50†2ku band 60cm satellite dish Product id0„50†2wot-ku-60 Update time0„50†22011.10.05 Caliber0„50†2short axle:60cm, long axle:65cm Focus length0„50†2393mm Ku-band gain 12.5ghz0„50†236.67db Material0„50†2steel Surface0„50†2spray plastic Stand0„50†2in common use 00
Satellite antenna high anti-corrosion and well in anti-wind. Excellent in stability, high precision and beautiful design From 30cm to 120cm satellite dish antenna High quality, best performance Finish: polyester powder coating Mount type: ground/pole/wall mount High gain, high anti-corrosion and well in anti-wind Excellent in stability, accurate in adjustment and fashionable design Customizable upon user's needs
Product name,0„5,0†2ku band 45cm satellite dish Product id,0„5,0†2woy-ku-45 Update time,0„5,0†22011.10.04 Caliber,0„5,0†2short axle:45cm, long axle:49.5cm Focus length,0„5,0†2270mm Ku-band gain 12.5ghz,0„5,0†234.23db Material,0„5,0†2steel Surface,0„5,0†2spray plastic Stand,0„5,0†2in common use Angle of elevation,0„5,0†20,0„3,0š0~ 90,0„3,0š0 Azimuth,0„5,0†20,0„3,0š0~ 360,0„3,0š0 Work surrounding temperature,0„5,0†2-40,0„3,0š3-60,0„3,0š3 Relative humidity,0„5,0†20--100% Frequency range,0„5,0†29750-11300 Wind speed,0„5,0†2can receive:25m/sec, works under weak signal:40m/sec, not damage:60m/sec Views,0„5,0†2166
Usage:communication antenna, tv antenna, broadcasting antenna Material:steel plate Azimuth:0¡ã-360¡ã Can receive:25m/sec Works uuder weak signal:40m/sec Not damage:60m/sec Surface:spray plastic Export markets:global Trademark:xsvc Packing:10sets of parts in a carton box, dishes in bulk Origin:renqiu city in hebei province, china Production capacity:700000pcs/year
Model no.:c band Usage:communication antenna, tv antenna Directionality:omnidirectional antenna Color:white/gray/black Thickness:0.6mm Calibre:180cm C-band gains:4ghz 36db Focal distance:740mm Export markets:global
Satellite dish antenna.
Satellite dish antenna, satellite antenna, satellite dishes, dish antenna, TV antenna, TV satellite antenna.
Metal stamping parts, electronic parts and auto parts.
Combination pliers, long nose pliers, diagonal cutting pliers and adjustable wrenches.
Product Features: The materials used in the manufacture of the products are all non-toxic and harmless substances, without discharging any toxic or harmful substances. The materials can be recycled after the life cycle, which determines the environmentally friendly nature of the products. Fully insulated, fully sealed and fully shielded epoxy resin switch cylinder, fuse cylinder (epoxy resin has excellent electrical properties, mechanical properties, thermal properties, which has long been applied to electrical equipment, and achieved good results). The switch cylinder and fuse cylinder are formed through the epoxy resin APG process.The insulating cylinder is a key component for solid insulation switches, whichis both the insulating and the bearing parts. It requires that such technical requirements as heat resistance, weatherability, cracking resistance, high mechanical strength, and good insulation strength are all satisfied at the same time. Cylinders have large volume, a large number of inserts, diverse shapes, which are relatively difficult to make. Kaili Electric Appliances has many years of experience in the design and manufacture of insulation parts, to ensure high-quality mass production of the components in terms of cylinder design, material formulation, and process. In addition to the operating mechanism, the high-voltage switch part of solid insulation indoor AC high-voltage vacuum switchgear is in a fully sealed state, to save cleaning and maintenance, thus reducing the cost of operation and maintenance. The touchable part is designed with the shielding measure to prevent the occurrence of personal electric shock accidents and improve the safety of use. The perfect interlocking system, and the clearly visible three-phase isolated fracture can prevent the occurrence of misuse accidents. Completely abolishing the application of SF6 gas can prevent the SF6 ring main units from decreased insulation properties and arc-quenching capacity due to lack of gas pressure which thereby causes explosion. The strengthened phase separation structure can prevent inter-phase or multi-loop short circuits which may expand or cause an explosion. With the explosion-proof vacuum interrupter, the switch sleeve provides further protection for the switch. The auxiliarygrounding switch of load switch - fuse combination electric appliances adopts the vacuum switch tube fixed inside the fuse cylinder.
ZBW box-type substation (10KV) ZBW modular substation series are designed to combine high-voltage electrical equipment, transformers, low-voltage electrical equipment into a compact package of power distribution devices commonly known as the European box-type substation. The products are suitable for 10KV (6KV) AC 50Hz substations, which are the distribution devices that combine high-voltage switchgear, transformers, and low-voltage switchgear, featured by small footprint, simple installation, safe and reliable performances, easy maintenance and other advantages. They can be directly connected to loads. One-time installation is enough to achieve the power transmission purposes. The combination of multiple units can constitute different power supply modes; therefore, the products are widely used in residential areas, high-rise buildings, tourist attractions, highways, industrial and mining enterprises, oil terminals, rural and rural networks and other places. Environmental Conditions for Operation 1. Altitude: �?� 1000m. 2. Wind speed: �?� 34m / s (not more than 700Pa). 3. Ambient temperature: highest temperature +40 �??, lowest temperature -35 �??. 4. Relative humidity: daily average value of not more than 95%, monthly average value of not more than 95%. 5. Shockproof: horizontal acceleration not greater than 0.4m / s2, vertical acceleration of 0.15m / s2. 6. Installation site inclination: not more than 3 °. 7. Installed in places away from fire or explosion hazards, serious contamination, chemical corrosion and severe vibrations.
Product Overview ZBW0.69 / 40.5 modular substation series are the 35KV substation equipment dedicated for wind power generation, developed based on the digestion and absorption of advanced technology and production processes, to meet the growing need for wind power generation. The new product of our company - metal shell substations adopt aluminumcoated zinc platesheets and electrostatic spraying process for the boards, whose mechanical strength and anti-corrosion effect are greatly improved; therefore, the products are especially suitable for wind farms with the damp environment and heavy winds. The sheet metal is processed and assembled by CNC machine tools to ensure the accuracy of the connections, compact structure, convenient and flexible assembly and processing. The stainless steel hinge allows the doors to be opened and closed more flexibly. The elastic structure is adopted, to achieve good windproof effect. The automatic return device of the lock allows the door to be opened and closed with ease. The top is of the double-decked structure which is beautiful and generous. It also strengthens the such functions as rainproof, heat insulation, heat preservation and anti-condensation. The top can be hoisted through simple operation, which is convenient for the maintenance and upgrading of high and low voltage equipment and transformers. The housings can also be made of non-metallic materials, (cement, composite materials, but they are inferior to the aluminum coated zinc plate housing in the aspects of mechanical strength and corrosion resistance, and the structural flexibility is very low.) The bottom adopts channel steel and angle steel assembled through integralwelding, featured by high strength, small deformation, easy handling; DACROMETanti-corrosion treatment is used, whose corrosion resistance is comparable with that of hot-dip galvanizing.
Transformer Bushing, Oil Level Gauge, Insulator.
Hardware stamping parts, automotive parts, electronic and electrical parts, machining, sheet metal parts.
Material: Steel Wire Material thickness fence: 4 / 2.5 mm Mesh Width: 60 x 60 mm The Element: B x H 775 x 640 mm Height arc center: 785 mm The rod: L x Ø 980 x 7,5 mm Green powder coated (RAL6005)
