5mm 7mm 8mm 10mm 12mm 14mm 16mm 10pcs/bag 0.10kg
14/12mm 12/10mm 10/8mm 7/3.5mm 5/3.5mm 14/12mm 12/10mm 10/8mm 7/3.5mm 5/3.5mm
1.Product description The microducts which with ribbed and low friction inner surface are made up of hdpe (high density polyethylene). It can be used single or as the primary tube of the microduct bundle. The Microducts are suitable for fibre blowing and direct buried and installed applications. 2.Features and benefits A.Material: hdpe, high density polyethylene B.Tube type 6-14mm C.Low friction internal coating D.With ribbed inner surface 3.Parameters Permissible tolerance (mm) ¡¡¡ì¡¨¨0.1 Tensile strength at yield (mpa) Hdpe microduct ¡y18 Lszh microduct ¡y8 Elongation at break [%] ¡y350 Minimum bending radius (mm) 20¡¡¡ì¡¨¦d Ring stiffness (kn/sq.M) Sn4 : ¡y 4 Sn6.3 : ¡y 6.3 Sn8 : ¡y 8 Sn12.5: ¡y 12.5 Sn16 : ¡y16 Normal operating pressure (bar) 12 Storage temperature (¡ãc) -20¡ãc ~ +60¡ãc 4.The main type of the products 8/6 mm 10/8 mm 12/10 mm 14/12 mm 4km/drum
Ftth telecommunication products.
Electronic parts
Optical fiber cable distribution frame This product is used as the terminal ending and distribution of the main optical fiber cable of the central office in the optical fiber cable and communication system. It can connect , distribute and dispatch the fiber circuit. It is the distribution connection equipment between the optical fiber cable and the fiber cable communication system.
Optical cable splice closure This product belongs to open structure airproof tie-in system of machine pressure. It is widely used for communication, network system, cabled t.V. Of catv, the fiber optic cable by network, the direct and branch connection .It is made from engineering plastics with high and strong function. It also has dependable functions of airproofing and enduring lightning strike.
Cable terminal box This product is widely used in the city and country cable network, the transferring system of data and graph, the catv wired tv series and the direct and branch connection of the indoor cable which acts as pigtail storage and connector protection. It is made from cold-rolled steel sheets by electrostatic plastic spraying, so it has proper structure and neat looking. We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to practical engineering requirements. The panel of this product , on which adapter is installed can be replaced optionally by fc, sc, st, lc and so on. It is also suitable for both ribbon optical fiber cable and common optical fiber cable.
Ddf digital distribution frame Digital distribution frame is suitable for the distribution and connection of digital terminal equipment or exchanger, with performance of circuit redeployed, connection and test. It is easy for operation and maintenance. It can meet the requirement of circuit redeployed and business exchange.
Ntm splicing It has light and beautiful plastic structure. It is convenient for operation and installation .Modular structure makes the storage enlargement convenient . 30 degree oblique installation of adapters can prevent eyes from harm of laser and ensure the fixer bending radius. Many kinds of ntm splicing &distribution marks make the recording convenient
Distribution box This product adopts the techniques of the zinc coating of cold rolled steel plate and surface-spraying with the features of high security. It is usually the ideal choice for networks, and it is especially designed for the net cards of school buildings. Its adapter adopts ceramic core thus, so it can ensure excellent mechanical and optical performance. It is suitable for wire television , and it can be maintained quickly and conveniently.
Fiber cable cross-connecting cabinet This product is designed for the connection between the optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage and dispatching on the fiber cable. Cabinets are made of advanced double-side wiredra-wing stainless steel, with the protection grade reaching ip65. Thermosetting fiberglass -reinforce d polyester can endure climate changes and adverse environment .
Product Features: The materials used in the manufacture of the products are all non-toxic and harmless substances, without discharging any toxic or harmful substances. The materials can be recycled after the life cycle, which determines the environmentally friendly nature of the products. Fully insulated, fully sealed and fully shielded epoxy resin switch cylinder, fuse cylinder (epoxy resin has excellent electrical properties, mechanical properties, thermal properties, which has long been applied to electrical equipment, and achieved good results). The switch cylinder and fuse cylinder are formed through the epoxy resin APG process.The insulating cylinder is a key component for solid insulation switches, whichis both the insulating and the bearing parts. It requires that such technical requirements as heat resistance, weatherability, cracking resistance, high mechanical strength, and good insulation strength are all satisfied at the same time. Cylinders have large volume, a large number of inserts, diverse shapes, which are relatively difficult to make. Kaili Electric Appliances has many years of experience in the design and manufacture of insulation parts, to ensure high-quality mass production of the components in terms of cylinder design, material formulation, and process. In addition to the operating mechanism, the high-voltage switch part of solid insulation indoor AC high-voltage vacuum switchgear is in a fully sealed state, to save cleaning and maintenance, thus reducing the cost of operation and maintenance. The touchable part is designed with the shielding measure to prevent the occurrence of personal electric shock accidents and improve the safety of use. The perfect interlocking system, and the clearly visible three-phase isolated fracture can prevent the occurrence of misuse accidents. Completely abolishing the application of SF6 gas can prevent the SF6 ring main units from decreased insulation properties and arc-quenching capacity due to lack of gas pressure which thereby causes explosion. The strengthened phase separation structure can prevent inter-phase or multi-loop short circuits which may expand or cause an explosion. With the explosion-proof vacuum interrupter, the switch sleeve provides further protection for the switch. The auxiliarygrounding switch of load switch - fuse combination electric appliances adopts the vacuum switch tube fixed inside the fuse cylinder.
ZBW box-type substation (10KV) ZBW modular substation series are designed to combine high-voltage electrical equipment, transformers, low-voltage electrical equipment into a compact package of power distribution devices commonly known as the European box-type substation. The products are suitable for 10KV (6KV) AC 50Hz substations, which are the distribution devices that combine high-voltage switchgear, transformers, and low-voltage switchgear, featured by small footprint, simple installation, safe and reliable performances, easy maintenance and other advantages. They can be directly connected to loads. One-time installation is enough to achieve the power transmission purposes. The combination of multiple units can constitute different power supply modes; therefore, the products are widely used in residential areas, high-rise buildings, tourist attractions, highways, industrial and mining enterprises, oil terminals, rural and rural networks and other places. Environmental Conditions for Operation 1. Altitude: �?� 1000m. 2. Wind speed: �?� 34m / s (not more than 700Pa). 3. Ambient temperature: highest temperature +40 �??, lowest temperature -35 �??. 4. Relative humidity: daily average value of not more than 95%, monthly average value of not more than 95%. 5. Shockproof: horizontal acceleration not greater than 0.4m / s2, vertical acceleration of 0.15m / s2. 6. Installation site inclination: not more than 3 °. 7. Installed in places away from fire or explosion hazards, serious contamination, chemical corrosion and severe vibrations.
Product Overview ZBW0.69 / 40.5 modular substation series are the 35KV substation equipment dedicated for wind power generation, developed based on the digestion and absorption of advanced technology and production processes, to meet the growing need for wind power generation. The new product of our company - metal shell substations adopt aluminumcoated zinc platesheets and electrostatic spraying process for the boards, whose mechanical strength and anti-corrosion effect are greatly improved; therefore, the products are especially suitable for wind farms with the damp environment and heavy winds. The sheet metal is processed and assembled by CNC machine tools to ensure the accuracy of the connections, compact structure, convenient and flexible assembly and processing. The stainless steel hinge allows the doors to be opened and closed more flexibly. The elastic structure is adopted, to achieve good windproof effect. The automatic return device of the lock allows the door to be opened and closed with ease. The top is of the double-decked structure which is beautiful and generous. It also strengthens the such functions as rainproof, heat insulation, heat preservation and anti-condensation. The top can be hoisted through simple operation, which is convenient for the maintenance and upgrading of high and low voltage equipment and transformers. The housings can also be made of non-metallic materials, (cement, composite materials, but they are inferior to the aluminum coated zinc plate housing in the aspects of mechanical strength and corrosion resistance, and the structural flexibility is very low.) The bottom adopts channel steel and angle steel assembled through integralwelding, featured by high strength, small deformation, easy handling; DACROMETanti-corrosion treatment is used, whose corrosion resistance is comparable with that of hot-dip galvanizing.
Metal stamping parts, electronic parts and auto parts.
Optical cable terminal box, optical cable closure.
Optical cable splice closure series, cable terminal box series, odf, ddf distribution box, cable distribution frame series, distribution box series, fiber cable cross-connecting cabinets, cabinets series, cable-dispart box, junction box, cross-connect box, optical pass components series, catv equipment series, fitting series of optical cable and optical fiber.
Satellite dish antenna.
Satellite dish antenna, satellite antenna, satellite dishes, dish antenna, TV antenna, TV satellite antenna.
