12Mm Thickness Acoustic Concealed Mineral Board,Square Fissured Ceiling Board Tile Transportation and storage 1. Steel corner is necessary at the touch point of the rope and the board box, so that can avoid damage of the box. 2. Support the mineral wool sound absorption board with wooden structure that is higher than 15cm when the board is put on the ground. The distance to the wall should be more than 40cm. 3. Please pay attention to the warnings on the box in transportation and storage. Cycle and reutilization Mineral fiber, the main raw material, contains recuperated slag, the organic fiber is recuperated newspaper. The recuperated materials do not contain any asbestos, formaldehyde and other venenous and noxious substance. The scrape during manufacturing and old ceiling board can reused(the reusing rate can reach 79%) which decreased the builders rubbish and avoids the environment pollution. Green production process The production process accords with the standard of environmental protection. The main released substance during production process is steam. Green application The main function of mineral wool board is sound absorption and noise reduction which can help to ease oneself and abate the noise. The mineral wool board can absorb and disassemble poisonous substance, increase the density of negative oxyanion effectively and help us to build a foresting cities. Absorbing the excess moisture and improve the living environment. The strong reflected ability can improve the indoor sunlight, protect the vision and ease oneself. Energy saving and consume decreasing The high reflectance of mineral wool board can decrease the electric power cost indirectly. The rate can reach 18%-25%. The performance of heat preservation and heat insulation can decrease the costs of refrigeration and heating greatly and the rate can reach 30%-45%. Patterns: Pin hole fine fissured, dune surface, sand textured, customized Material: Wet formed mineral fiber Surface: Vinyl latex Color: White, black Size: 595*595mm, 603*603mm, 603*1213mm, 600*1200mm, customized Thickness: 6-20mm Edge: Square, Tegular, Micro, Concealed NRC: 0.4-0.6 Fire Resistance: Class 0/ Class 1-BS 476 Light Reflentance: 0.80-0.95 Humidity Resistance(RH): 80%-95% Environmental protection: Non-asbestos, NO formaldehyde
Glass wool was used for building materials , and steel structure insulation. Soundproof and fireproof used for wall and roof of house. Heat preservation for steel structure building, heat Insulation for wall and roof of house to save energy.
Excellent fiber glass wool building material is a silk-like material made by fiberization in the TEL process and spraying ofthermosetting resin. By further deep processing of thermal setting, this material can be made into series of multi-purpose fuerda products. It features numerous advantages : it is non-combustible, nontoxic, and resistant to corrosion; it has low moisture rate and good hydrophobicity.
1,High compressive strength, tensile strength and good durability ensures the reliability and long-term stability of the product in the application. 2,Low thermal conductivity can effectively reduce the heat loss of the building to achieve energy saving and emission reduction. 3. Rock wool blanket will not release heat and poisonous smoke because of its incombustibility and can effectively partition the spread of flam when fire occurs. 4,It has good performance of non-hygroscopicity, ageing resistance and long-term stability. 5,It is light weight and easy to be cut and processed It is widely used for heat insulation and sound absorption in industrial workshops, Prefab houses, Portable cabins, warehouses, public facilities, exhibition centers, shopping malls, and a variety of indoor playgrounds, sports stadiums and etc.
Place Of Origin: Zhejiang, China (Mainland) Form: Cream Certification: Confirmed Ingredient: Mineral Feature: Sunscreen, Waterproof Color: 2 Colors Per Palette Occasion: Common Makeup Use For: Cover Skin Flaws,Dark Eyecircles,Pouch Etc. Use: Face 1. High quality ingredients and strict QC. 2. Professional team of R&D and 5-star service. 3. Large production capacity and fast delivery. 4. Factory price: Offer EXW price, FOB price and CIF price, or according to client's requirements.
Building steel formwork- laser cutting and sheet metal china, lianda industrial science and technology (dalian) co., ltd. Was established 1998, is a precision sheet metal processing and laser cutting, punching, cutting, folding, pressing, welding and other train professional design and production enterprises. The company has the most advanced laser cutting machine and sheet metal processing equipment. One of the important equipment bystronic laser cutting machine, japan amada cnc shears, japan amada cnc punching, cnc bending machine, bystronic bending machines. The product quality and the technology are in the international advanced level. Company to undertake the business of precision sheet metal processing: widely applicable to public utilities, communications, electricity, power, air conditioning, industrial, power amplifier, transportation, advertising and other industries. Main business: laser cutting service china, sheet metal fabrication china, sheet metal parts china, sheet metal parts Oem china, odm/oem professional stainless steel 316/303/304 sheet metal stamping parts with cnc laser cutting bending etc. -
Glass Fiber Yarn Description: 1. It is made of fiberglass roving yarns which are bulked and blown through special instrument with high pressure air. 2. It has high strength as continuous fiber and fluffiness as staple fiber, low thermal conductivity coefficient, high dust-accommodation and filterability. 3. Glass fiber texturized yarn with metallic (copper wire, inconel wire or stainless wire) are also available. Glass Fiber Yarn Applications: 1. Fiberglass yarn has advantage as insulating ability. 2. It is good and fire resistant against heat material, used as heat insulation, electrical insulation materials and also made into other products. 3. It with metallic can extensively apply to friction materials. 4. It is the excellent substitute for asbe stos.
Graphite Packing Inconel Wire Graphite Raw Material Description: 1. Graphite Packing Inconel Wire Graphite Raw Material is made from expanded graphite yarn braided into through all kinds of technology of braiding . 2. They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. 3. The sealing capability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. Graphite Packing Inconel Wire Graphite Raw Material Application Areas: Braided Graphite packing can be used in valve and some rotary application, high temperature valve and soot blowers Graphite Packing Inconel Wire Graphite Raw Material Application Media: Braided Graphite packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc. Graphite Packing Inconel Wire Graphite Raw Material Not Suitable For: Fewer strong oxidizers Other Graphite Packing Inconel Wire Graphite Raw Material : (SP-5000FG) Pure Flexible Graphite Braided Packing With Fiberglass Threads Reinforced (SP-5000INC) Pure Flexible Graphite Braided Packing With Inconel Wire Reinforced (SP-5000FG) Pure Flexible Graphite Braided Packing With Carbon Threads Reinforced (SP-5200) Pure Flexible Graphite Packing PTFE Impregnated (SP-5600) Pure Flexible Graphite Packing With High Carbon Fiber Corner Packing (SP-5800MESH) Pure Flexible Graphite Packing With Inconel Jacketed Mesh Vocer On Every Twisted Yarn
Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing Description: 1. Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing was made from Synthetic Composite yarn, and impregnated with PTFE emulsion (No lubricants or oils). 2. To provide extra chemical resitance. Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing Application: 1.Stuffing Rope Acrylic PTFE Packing Valve Stem Seal Pump Gland Packing is widely used in Application of Alkalies, mild acids, solvents, steam and oils. 2.It is recommended for rotary shafts, reciprocating applications, and valves.
Packing Seal PTFE Filament With PTFE Oil Gland Packing Description: STYLE 6800W is Braided of pure PTFE filament yarns, impregnated with ptfe dispersion, firm high-density braided packing. Packing Seal PTFE Filament With PTFE Oil Gland Packing Application Areas: STYLE 6800W can be used in a wide range of process chemicals and concentrated acids, valve stems, rotary shafts, reciprocation equipment, and other processing equipment high peripheral speed, rod, pistons. Packing Seal PTFE Filament With PTFE Oil Gland Packing Application Media: 1. STYLE 6800W is suitable for water, steam, concentrated acids and caustics, solvents, oils, fatty acids, detergents, aggressive gases , resistant to gamma and neutron rays, hydrogen, heat transfer oils, and most other chemicals and solvents. 2. STYLE 6800W is not suitable for molten alkali metals and fluorine compounds at high temperatures and pressures.
Description of Valve Steam Seal PTFE Kevlar Aramid Fiber Corner Gland Packing: Free Samples Valve Steam Seal PTFE Kevlar Aramid Fiber Corner Gland Packing can be used in piston pumps, valves, pulp, paper, waste water treatment, petrochemical, and other general industrial applications. Free Samples Valve Steam Seal PTFE Kevlar Aramid Fiber Corner Gland Packing is suitable for oils, solvents, diluted acids and alkalis. Abrasive media like sand, slurry, sewage, brine and etc. Advantages of Valve Steam Seal PTFE Kevlar Aramid Fiber Corner Gland Packing : 1. Aramid fiber PTFE kevlar packing can be used in abrasive application 2.Little monitoring required 3.High pressure resistance
Kevlar Fiber Gland Packing Description: 1. STYLE 6500 Kevlar Fiber Gland Packing is made of Du Pont's continuous filament Kevlar yarn impregnated with PTFE emulsion and processed with lubricant. 2. As the strength and module of Kevlar is as high as the steel-like strength. 3. This packing compared with other kinds of braided packing, they can resist more serve media and higher pressure. 4. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into seals packing ring set. Kevlar Fiber Gland Packing Application Areas: 1. STYLE 6500 can be used in rotary pump, valves, piston pumps, mixers, reactors, pulp and paper, pharmaceutical, food, sugar, chemical and petrochemical, power stations, steel mills and many area. 2. Ideal as anti-extrusion rings in combination with softer packing. Kevlar Fiber Gland Packing Application Media: STYLE 6500 is suitable for most chemicals, water, steam, oils, solvents, abrasive sand, slurry and other gritty media. Kevlar Fiber Gland Packing Not Suitable For: Highly concentrated acids, caustic solutions, alkali metals, oxygen
Graphite PTFE with Kevlar Corner Sealing Rope Description: Molded Packing Ring is made from different kinds of gland packing.Such as PTFE molded packing, PTFE abestos molded packing, graphite molded packing, Carbonized fiber molded packing ring, Acrylic fiber molded packing ring. Molded Packing Ring can be produced as customer's request. It is used widely in many situation. There are many styles of molded packing ring:PTFE Molded Packing Ring, Lubricated PTFE Fiber Molded Packing Ring, Graphite PTFE Fiber Molded Packing ring with oil, carbon fiber PTFE molded packing ring,Graphite fiber molded packing ring,ect.
What's Fused Cast The term Fused Cast refers to a manufacturing process in which the ceramic bonding is obtained by the solidification of a mixture which has been melted in an electric furnace and cast in liquid state into molds. Fused Cast AZS Blocks Introduction AZS fused cast block is also called fused cast block which is abbreviated as AZS because it contains Al2O3ZrO2SiO2. Fused cast AZS block is made from pure alumina powder and Zircon sand (composed of 65% zirconia and 34% SiO2). After Alumina powder and zircon sand melting in electric furnace, they are cast into various molds and cool themselves down to become white solid. Because of the different content of Zirconia from 33%-41%, our fused cast AZS blocks can be divided into three types 33,36 and 41. TY-AZS33 Description Fused cast AZS 33 block has dense micro structure which ensures its great resistance in glass liquid, thus you donâ??t have to worry about the solidification and other problems. It is widely applied to glass furnace for superstructure, working pool side wall, paving blocks, feeder channels, tank bottoms, C-shaped block and doghouse crown,etc. Advantages 1. Compact microstructure 2. Good erosion resistibility to molten glass 3. Good thermal shock resistibility,high compression resistance 4. Barely rendering blister 5. A variety of formats and shapes for furnace different working areas
Baier is the professional gypsum building materials manufacturer in china, we import germany technique and equipment, and using high purity gypsum powder as main material and mixed with fiber and highquality additive.Also we have passed iso9001:2000 and astm(usa)certificate , all these guarantee our top grade products.We have many years experience in export , so we also could give you the complete service in our cooperation.Now the leading product in our company is plasterboard; it contains standard plasterboard, fire-proof plasterboard, moisture-proof plasterboard, gypsum ceiling tile, self tapping screw, paper joint tape, jointing compound and some other auxiliary material which might interest you. Name: gypsum board Normal size 1200mm 2400mm / 1220mm 2440mm Length 2400mm / 2440mm / 3600mm / 3660mm Width 1200mm / 1220mm Thickness 7mm ~ 15mm Edge Square edge & tapered edge Packing Every two pieces face to face are packed with sealing paper. Moq 2* 20ft containers
Dear sir This is huina liu from shandong chuangxin building materials machinery co.Ltd.The manufacturer that producingmgo board machinesprofessionally. And you can also customize board machinesat will in our factory. Compared to the agent, our price is competitive, we sincerely look forward to cooperation with you, please contact me for more details.
Dear sir This is huina liu from shandong chuangxin building materials machinery co.Ltd. Â the manufacturer that producing fiber cement board machinesâ professionally. And you can also customize board machinesâ at will in our factory. Compared to the agent, our price is competitive, we sincerely look forward to Cooperation with you, please contact me for more details.Â
Dear sir This is huina liu from shandong chuangxin building materials machinery co.Ltd. the manufacturer that producing eps sandwich wall panel making machines Professionally.And you can also customize wall panel machines at will in our factory. Compared to the agent, our price is competitive, we sincerely look forward to cooperation with you, please contact me for more details.
Dear sir This is huina liu from shandong chuangxin building materials machinery co.Ltd.The manufacturer that producingmgo wall panel making machinesprofessionally. And you can also customize wall panel machinesat will in our factory. Compared to the agent, our price is competitive, we sincerely look forward to cooperation with you, please contact me for more details.
Alias: 1-hydroxypyridine-2-thione zinc Molecular formula:C10H8N2O2S2Zn ZPT Structural formula:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Hazardous class: 6.1 Molecular weight:317.68 CAS NO.: 13463-41-7 EINECS NO. :236-671-3 Packing Group: III HS : 2933399010 SOLID UN NO.:2811. Hazard Symbols: XI, Risk Phrases: 36/37/38, Safety Phrases: 24/25 1. Zinc Pyrithione 98% powder Specs: APPEARANCE :White to off white color Identity ( by IR) : Conforms ASSAY â?¥98% MELTING POINT â?¥240â?? PH(5%solution) 6.5-8.5 LOD : NMT 0.5% Particle size : D70
