Door Hinges-5
Door Hinges-4
Door Hinges-3
Door Hinges-2
Door Hinges-1
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Yingfan high-density polyethylene (HDPE) uniaxial geogrid is a high-performance soil reinforcement product to resist elongation when subjected to heavy loads for long periods of time. They allow quicker construction and lower construction cost. (Please note that the price is not stable due to raw material (influenced by oil price) and exchange rate.) Product Features - Stabilization Reinforcement - Good chemical resistance - Durable and highly resistant to chemicals, UV radiation, etc. Usage Areas - Municipal roads, Railway ballast, and highway - Industrial shipping yards - Parking lots, steep slopes - Retaining walls, bridge abutments... and more Standard Size - 3/4/6 m width - 50-100 m length - Upon request
HSS M35 5% Cobalt Centre Drill Bits
HSS M35 5% Cobalt Step Drill Bits Set, Amber FINISHED, 3PCS:4-12, 4-20-4-32MM
170PCS HSS TWIST DRILL BITS SET, 118 DEGREE, DIN338, BLACK FINISHED IN METAL BOX. 1.0-8.0MMX0.5, EACH 10PCS 8.5-10.0MMX0.5, EACH 5PCS.
HSS M35 Cobalt 5% Twist Drill Bits SET, 1.0-10.0X0.5MM, 135 SPLIT POINT, DIN338 STANDARD, Amber Finishing,rose Plastic Box Packing
Steel construction materials, hardware & tools, glass, cement, plywood, plastic, aluminium.
Turbocharger.
Motors, hydraulic power units, coffee grinders, construction machinery, electirc equipments.
Geogrids, Geotextile, Geocell, Geonet,.
steel structure buildings , we can design and supply all kinds of steel hangar kits, steel hall, steel structure storage shed, steel villa frame, steel structure warehouse, steel structure workshop, steel construction building, commercial buildings, aircraft hangars, stands, platform, indoor horse arena, churches, Logistics Warehouse, apartment building,office building,steel hotel building, steel structure mezzanine floor, industrial buildings , processing plants, steel warehouses, shopping malls,water tower,structural frame, poultry houses,poultry farm building, chicken farm buildings,chicken house,broiler house,cow barn cow shed, dairy farm building, pig building house, goat building house, agricultural buildings and many other steel structures and many other steel structures
Building material just like various ceiling board, drywall tape and adhesive tape.
Minerals, construction machinery, spare parts, ferrous metals.Procurement, inspection, shipping, commission agents
Stone crushing, dryer machinery, grinding mill, raymond mill, ore dressing.
Aluminum content: 25-42% Compressive strength at room temperature: 30-45MPa Standard brick size: 230*115*65mm Cost-effective: The phosphoric acid impregnated products of blast furnace clay bricks with good thermal stability and qualified quality after drying treatment and secondary low temperature firing can be used for masonry of the upper part of the blast furnace furnace lining.
