Aluminum content: 25-42% Compressive strength at room temperature: 30-45MPa Standard brick size: 230*115*65mm Cost-effective: The phosphoric acid impregnated products of blast furnace clay bricks with good thermal stability and qualified quality after drying treatment and secondary low temperature firing can be used for masonry of the upper part of the blast furnace furnace lining.
Performance characteristics: wear resistance, corrosion resistance, peeling resistance, low creep, good thermal shock stability, service life is 1.5 times that of ordinary products; Main uses: Mainly used in blast furnaces, hot blast furnaces, carbon roasting furnaces, carbon calciners, coke ovens, steel barrels, casting systems, boilers, cement kilns, glass kilns and various kiln lining and thermal equipment, etc., suitable for metallurgy, machinery, building materials, casting, ceramics, electric power, petroleum, chemical and other industries. Standard size:230*115*65mm First-class high-alumina bricks Al2O3 75% second-class high-alumina bricks Al2O3 60%~75% third-class high-alumina bricks Al2O3 48%~60%
Mullite bricks refer to high-alumina refractories with mullite as the main crystalline phase, and the general alumina content is between 65% ~ 75%. It is mainly used for hot blast furnace top, blast furnace body and bottom, glass melting furnace regenerator, ceramic sintering kiln, petroleum cracking system dead angle furnace lining, etc. Mullite bricks have high refractoriness, up to more than 1790 C, and have good thermal shock resistance. There are two types: sintered mullite bricks and fused mullite bricks. The crystallization of fused mullite is larger than that of sintered mullite, and the thermal shock resistance is better than that of sintered products. Aluminum content: 65-90% Standard brick size: 230*115*65mm Compressive strength at room temperature: 100-120MPa Good thermal shock resistance:
1. High temperature strength; 2. Resistant to corrosion in various atmospheres; 3. Excellent thermal shock stability; 4. Good thermal insulation; 5. The energy-saving effect is remarkable The operating temperature is below 1350C. Thermal insulation refractories are characterized by high porosity, generally 40%-85%; Low bulk density and low dry 1.5g/cm3: low thermal conductivity, generally less than 1.0W (m.K), it acts as the thermal insulation material of industrial kiln, can reduce the heat dissipation loss of the furnace, save energy, and can reduce the quality of the equipment under heat, the mechanical strength, wear resistance and slag erosion resistance of the thermal insulation refractory material is poor, and it is not suitable for the load-bearing structure of the kiln and direct contact with slag, charge, molten metal and other parts
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Gremlog Trading DMCC emerges as a pioneering force in the recycling landscape, offering recycled silica sand in sizes ranging from 0-1mm to 1-4mm. Leveraging the inherent advantages of repurposed silica-based spent foundry sands, Gremlog Trading DMCC champions sustainable practices within the metal casting industry. By providing recycled silica sand, Gremlog Trading DMCC contributes to energy conservation, reduces reliance on virgin materials, and delivers cost-effective solutions for both producers and end users. Gremlog Trading DMCC's recycled silica sand stands as a versatile resource, poised to revolutionize not only traditional applications but also industry-specific needs. At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries. Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
